ADEY MagnaClean Professional 2 System Filter 22mm
The ADEY MagnaClean Professional 2 is the UK's leading domestic magnetic system filter — protecting central heating boilers, radiators, and pipework from the damaging effects of black iron oxide sludge and non-magnetic debris. With a bi-directional in-line design, rapid two-minute installation, and compatibility with all domestic wet heating systems, it is the go-to filter for heating engineers on new-fit and retrofit jobs alike. Independently proven to reduce heating bills by up to 6% annually and maintenance costs by up to 33%.
The bi-directional in-line port design allows either port to be used as the inlet, fitting neatly into existing pipework without additional bends or fittings. A full installation typically takes under two minutes, reducing time on site — particularly valuable on high-volume retrofit programmes.
A powerful rare-earth magnet in a stainless steel housing captures magnetite sludge, while an integrated debris mesh collects non-magnetic particulate — scale, sand, and pipe debris. Together they deliver comprehensive protection against all the main causes of boiler inefficiency and failure.
Fully compatible with the ADEY MagnaCleanse® power-flushing system. For dirty systems, simply remove the filter canister before flushing and refit afterwards. The fully removable canister ensures all trapped magnetite leaves the system rather than being dislodged back into the pipework.
A dedicated dosing port allows ADEY MC1+ Protector or MC3+ Cleaner to be added without draining the system. Annual inhibitor top-up is completed in seconds, keeping service visits short and reducing disruption for homeowners.
The filter body accepts horizontal, vertical, and angled pipe runs without compromising performance. This makes the Professional 2 a practical choice across the full range of domestic installations — from tight combi boiler cupboards to open plant rooms.
The lightweight glass-reinforced nylon canister resists corrosion and elevated temperatures up to 95°C. Nickel-plated brass isolation valves with PTFE seals ensure reliable shut-off for servicing and eliminate the risk of joint weeping over time.
| Specification | Value |
|---|---|
| SKU | MAGPRO2/22 |
| Connection Size | 22mm compression |
| Max Operating Pressure | 6 bar |
| Max Operating Temperature | 95°C |
| Max Flow Rate | Up to 50 litres/minute |
| Flow Configuration | Bi-directional (either port can be inlet) |
| Body Material | Glass-reinforced nylon |
| Magnet Housing | Stainless steel |
| Valve Material | Nickel-plated brass with PTFE seals |
| Suitable Systems | All domestic wet heating (combi, sealed, open-vented) |
| Standards | UK Pressure Equipment (Safety) Regulations 2016; BS7593 |
| Warranty | 2 years (registration required) |
More Images
ADEY MagnaClean Professional 2 System Filter 22mm
The ADEY MagnaClean Professional 2 is the UK's leading domestic magnetic system filter — protecting central heating boilers, radiators, and pipework from the damaging effects of black iron oxide sludge and non-magnetic debris. With a bi-directional in-line design, rapid two-minute installation, and compatibility with all domestic wet heating systems, it is the go-to filter for heating engineers on new-fit and retrofit jobs alike. Independently proven to reduce heating bills by up to 6% annually and maintenance costs by up to 33%.
The bi-directional in-line port design allows either port to be used as the inlet, fitting neatly into existing pipework without additional bends or fittings. A full installation typically takes under two minutes, reducing time on site — particularly valuable on high-volume retrofit programmes.
A powerful rare-earth magnet in a stainless steel housing captures magnetite sludge, while an integrated debris mesh collects non-magnetic particulate — scale, sand, and pipe debris. Together they deliver comprehensive protection against all the main causes of boiler inefficiency and failure.
Fully compatible with the ADEY MagnaCleanse® power-flushing system. For dirty systems, simply remove the filter canister before flushing and refit afterwards. The fully removable canister ensures all trapped magnetite leaves the system rather than being dislodged back into the pipework.
A dedicated dosing port allows ADEY MC1+ Protector or MC3+ Cleaner to be added without draining the system. Annual inhibitor top-up is completed in seconds, keeping service visits short and reducing disruption for homeowners.
The filter body accepts horizontal, vertical, and angled pipe runs without compromising performance. This makes the Professional 2 a practical choice across the full range of domestic installations — from tight combi boiler cupboards to open plant rooms.
The lightweight glass-reinforced nylon canister resists corrosion and elevated temperatures up to 95°C. Nickel-plated brass isolation valves with PTFE seals ensure reliable shut-off for servicing and eliminate the risk of joint weeping over time.
| Specification | Value |
|---|---|
| SKU | MAGPRO2/22 |
| Connection Size | 22mm compression |
| Max Operating Pressure | 6 bar |
| Max Operating Temperature | 95°C |
| Max Flow Rate | Up to 50 litres/minute |
| Flow Configuration | Bi-directional (either port can be inlet) |
| Body Material | Glass-reinforced nylon |
| Magnet Housing | Stainless steel |
| Valve Material | Nickel-plated brass with PTFE seals |
| Suitable Systems | All domestic wet heating (combi, sealed, open-vented) |
| Standards | UK Pressure Equipment (Safety) Regulations 2016; BS7593 |
| Warranty | 2 years (registration required) |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The ADEY MagnaClean Professional 2 is the UK's leading domestic magnetic system filter — protecting central heating boilers, radiators, and pipework from the damaging effects of black iron oxide sludge and non-magnetic debris. With a bi-directional in-line design, rapid two-minute installation, and compatibility with all domestic wet heating systems, it is the go-to filter for heating engineers on new-fit and retrofit jobs alike. Independently proven to reduce heating bills by up to 6% annually and maintenance costs by up to 33%.
The bi-directional in-line port design allows either port to be used as the inlet, fitting neatly into existing pipework without additional bends or fittings. A full installation typically takes under two minutes, reducing time on site — particularly valuable on high-volume retrofit programmes.
A powerful rare-earth magnet in a stainless steel housing captures magnetite sludge, while an integrated debris mesh collects non-magnetic particulate — scale, sand, and pipe debris. Together they deliver comprehensive protection against all the main causes of boiler inefficiency and failure.
Fully compatible with the ADEY MagnaCleanse® power-flushing system. For dirty systems, simply remove the filter canister before flushing and refit afterwards. The fully removable canister ensures all trapped magnetite leaves the system rather than being dislodged back into the pipework.
A dedicated dosing port allows ADEY MC1+ Protector or MC3+ Cleaner to be added without draining the system. Annual inhibitor top-up is completed in seconds, keeping service visits short and reducing disruption for homeowners.
The filter body accepts horizontal, vertical, and angled pipe runs without compromising performance. This makes the Professional 2 a practical choice across the full range of domestic installations — from tight combi boiler cupboards to open plant rooms.
The lightweight glass-reinforced nylon canister resists corrosion and elevated temperatures up to 95°C. Nickel-plated brass isolation valves with PTFE seals ensure reliable shut-off for servicing and eliminate the risk of joint weeping over time.
| Specification | Value |
|---|---|
| SKU | MAGPRO2/22 |
| Connection Size | 22mm compression |
| Max Operating Pressure | 6 bar |
| Max Operating Temperature | 95°C |
| Max Flow Rate | Up to 50 litres/minute |
| Flow Configuration | Bi-directional (either port can be inlet) |
| Body Material | Glass-reinforced nylon |
| Magnet Housing | Stainless steel |
| Valve Material | Nickel-plated brass with PTFE seals |
| Suitable Systems | All domestic wet heating (combi, sealed, open-vented) |
| Standards | UK Pressure Equipment (Safety) Regulations 2016; BS7593 |
| Warranty | 2 years (registration required) |
