ADEY MagnaClean Micro2 Chemical Pack Filter MC1+ MC3+ Compact Systems
The ADEY MagnaClean Micro2 Chemical Pack is the complete one-box solution for protecting smaller domestic central heating systems — ideal for flats, apartments, and compact properties. It combines the space-saving MagnaClean Micro2 magnetic filter (22mm) with ADEY's MC1+ Protector and MC3+ Cleaner, providing both mechanical filtration and the chemical treatment needed to clean, protect, and maintain the system from day one. Compliant with BS7593:2006, non-toxic, and compatible with all metals and materials typically found in domestic wet heating systems.
ADEY's advanced compact filter with twin reverse-flow debris chamber, speed-fit connectors, bi-directional flow, and the smallest servicing height in its class. The included air vent assembly makes commissioning and re-filling easier, particularly on small closed-circuit systems in flats where bleed access can be limited.
ADEY MC1+ is the ongoing system protector — preventing electrochemical corrosion between dissimilar metals (aluminium, copper, steel) and limescale deposition. It maintains the system water in a stable, non-aggressive state, protecting the boiler heat exchanger and all circuit components. A 500ml dose suits most compact flat systems up to ~80–100 litres system volume.
MC3+ is formulated to dissolve and disperse magnetite sludge, limescale, and flux residues in existing heating circuits. Highly effective even at low concentrations, it mobilises compacted deposits so they can be removed by the magnetic filter or flushed from the circuit. Non-toxic and non-corrosive to heating system materials.
The combination of magnetic sludge removal and scale inhibition keeps the boiler heat exchanger operating at peak efficiency, independently proven to cut annual heating energy use by up to 6%. For a flat occupant on high gas tariffs, this saving can offset the cost of the pack within the first heating season.
Systems protected by a MagnaClean filter and properly inhibited with MC1+ generate significantly less sludge and corrosion, reducing the frequency of boiler breakdowns, pump failures, and heat exchanger blockages. ADEY data supports a maintenance cost reduction of up to 33% over the filter's service life.
Both MC1+ and MC3+ comply with BS7593:2006 for water treatment in domestic heating systems. This compliance, combined with the magnetic filter, satisfies the water treatment requirements stipulated by boiler manufacturers including Worcester Bosch, Baxi, Vaillant, and Ideal for their extended warranty conditions.
| Item | Detail |
|---|---|
| SKU | MICROPACK |
| Filter Included | MagnaClean Micro2 — 22mm compression (FL1-03-01274) |
| Chemical 1 | ADEY MC1+ Protector — 500ml |
| Chemical 2 | ADEY MC3+ Cleaner — 500ml |
| Filter Max Pressure | 6 bar |
| Filter Max Temperature | 95°C |
| Filter Max Flow Rate | 50 litres/minute |
| Magnet (filter) | 97.5mm length × 19mm diameter, stainless steel housed |
| Chemical Standard | BS7593:2006 compliant; non-toxic; environmentally friendly |
| EAN | 5060106370570 |
| Filter Warranty | 1 year (manufacturer's terms apply) |
Original: $214.60
-65%$214.60
$75.11More Images
ADEY MagnaClean Micro2 Chemical Pack Filter MC1+ MC3+ Compact Systems
The ADEY MagnaClean Micro2 Chemical Pack is the complete one-box solution for protecting smaller domestic central heating systems — ideal for flats, apartments, and compact properties. It combines the space-saving MagnaClean Micro2 magnetic filter (22mm) with ADEY's MC1+ Protector and MC3+ Cleaner, providing both mechanical filtration and the chemical treatment needed to clean, protect, and maintain the system from day one. Compliant with BS7593:2006, non-toxic, and compatible with all metals and materials typically found in domestic wet heating systems.
ADEY's advanced compact filter with twin reverse-flow debris chamber, speed-fit connectors, bi-directional flow, and the smallest servicing height in its class. The included air vent assembly makes commissioning and re-filling easier, particularly on small closed-circuit systems in flats where bleed access can be limited.
ADEY MC1+ is the ongoing system protector — preventing electrochemical corrosion between dissimilar metals (aluminium, copper, steel) and limescale deposition. It maintains the system water in a stable, non-aggressive state, protecting the boiler heat exchanger and all circuit components. A 500ml dose suits most compact flat systems up to ~80–100 litres system volume.
MC3+ is formulated to dissolve and disperse magnetite sludge, limescale, and flux residues in existing heating circuits. Highly effective even at low concentrations, it mobilises compacted deposits so they can be removed by the magnetic filter or flushed from the circuit. Non-toxic and non-corrosive to heating system materials.
The combination of magnetic sludge removal and scale inhibition keeps the boiler heat exchanger operating at peak efficiency, independently proven to cut annual heating energy use by up to 6%. For a flat occupant on high gas tariffs, this saving can offset the cost of the pack within the first heating season.
Systems protected by a MagnaClean filter and properly inhibited with MC1+ generate significantly less sludge and corrosion, reducing the frequency of boiler breakdowns, pump failures, and heat exchanger blockages. ADEY data supports a maintenance cost reduction of up to 33% over the filter's service life.
Both MC1+ and MC3+ comply with BS7593:2006 for water treatment in domestic heating systems. This compliance, combined with the magnetic filter, satisfies the water treatment requirements stipulated by boiler manufacturers including Worcester Bosch, Baxi, Vaillant, and Ideal for their extended warranty conditions.
| Item | Detail |
|---|---|
| SKU | MICROPACK |
| Filter Included | MagnaClean Micro2 — 22mm compression (FL1-03-01274) |
| Chemical 1 | ADEY MC1+ Protector — 500ml |
| Chemical 2 | ADEY MC3+ Cleaner — 500ml |
| Filter Max Pressure | 6 bar |
| Filter Max Temperature | 95°C |
| Filter Max Flow Rate | 50 litres/minute |
| Magnet (filter) | 97.5mm length × 19mm diameter, stainless steel housed |
| Chemical Standard | BS7593:2006 compliant; non-toxic; environmentally friendly |
| EAN | 5060106370570 |
| Filter Warranty | 1 year (manufacturer's terms apply) |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The ADEY MagnaClean Micro2 Chemical Pack is the complete one-box solution for protecting smaller domestic central heating systems — ideal for flats, apartments, and compact properties. It combines the space-saving MagnaClean Micro2 magnetic filter (22mm) with ADEY's MC1+ Protector and MC3+ Cleaner, providing both mechanical filtration and the chemical treatment needed to clean, protect, and maintain the system from day one. Compliant with BS7593:2006, non-toxic, and compatible with all metals and materials typically found in domestic wet heating systems.
ADEY's advanced compact filter with twin reverse-flow debris chamber, speed-fit connectors, bi-directional flow, and the smallest servicing height in its class. The included air vent assembly makes commissioning and re-filling easier, particularly on small closed-circuit systems in flats where bleed access can be limited.
ADEY MC1+ is the ongoing system protector — preventing electrochemical corrosion between dissimilar metals (aluminium, copper, steel) and limescale deposition. It maintains the system water in a stable, non-aggressive state, protecting the boiler heat exchanger and all circuit components. A 500ml dose suits most compact flat systems up to ~80–100 litres system volume.
MC3+ is formulated to dissolve and disperse magnetite sludge, limescale, and flux residues in existing heating circuits. Highly effective even at low concentrations, it mobilises compacted deposits so they can be removed by the magnetic filter or flushed from the circuit. Non-toxic and non-corrosive to heating system materials.
The combination of magnetic sludge removal and scale inhibition keeps the boiler heat exchanger operating at peak efficiency, independently proven to cut annual heating energy use by up to 6%. For a flat occupant on high gas tariffs, this saving can offset the cost of the pack within the first heating season.
Systems protected by a MagnaClean filter and properly inhibited with MC1+ generate significantly less sludge and corrosion, reducing the frequency of boiler breakdowns, pump failures, and heat exchanger blockages. ADEY data supports a maintenance cost reduction of up to 33% over the filter's service life.
Both MC1+ and MC3+ comply with BS7593:2006 for water treatment in domestic heating systems. This compliance, combined with the magnetic filter, satisfies the water treatment requirements stipulated by boiler manufacturers including Worcester Bosch, Baxi, Vaillant, and Ideal for their extended warranty conditions.
| Item | Detail |
|---|---|
| SKU | MICROPACK |
| Filter Included | MagnaClean Micro2 — 22mm compression (FL1-03-01274) |
| Chemical 1 | ADEY MC1+ Protector — 500ml |
| Chemical 2 | ADEY MC3+ Cleaner — 500ml |
| Filter Max Pressure | 6 bar |
| Filter Max Temperature | 95°C |
| Filter Max Flow Rate | 50 litres/minute |
| Magnet (filter) | 97.5mm length × 19mm diameter, stainless steel housed |
| Chemical Standard | BS7593:2006 compliant; non-toxic; environmentally friendly |
| EAN | 5060106370570 |
| Filter Warranty | 1 year (manufacturer's terms apply) |
