ADEY MagnaClean HP 28mm Filter for Heat Pumps & Low Temperature Systems
The ADEY MagnaClean HP is a purpose-engineered magnetic and non-magnetic system filter for heat pumps, underfloor heating, and low-temperature renewable heating systems. Featuring ADEY's patented CycloFlow™ Technology, it achieves exceptional first-pass capture of black iron oxide sludge and non-magnetic debris without restricting flow — even when the canister is full — protecting expensive heat pump equipment and maximising system efficiency. Backed by a 10-year warranty when registered, it is the benchmark filter for modern low-carbon heating installations.
Patented CycloFlow™ Technology generates a cyclonic flow that concentrates magnetic and non-magnetic particles at the magnet and gauze on the very first pass. This is critical in heat pump systems where lower flow velocities can cause debris to settle rather than be captured.
The MagnaClean HP is engineered to maintain system flow even when the canister is fully loaded with debris. In heat pump systems, any restriction in flow can trip safety cutouts and cause costly call-outs — the HP's non-blocking architecture eliminates this risk.
Supporting flows up to 80 litres per minute with minimal pressure drop, the HP handles the higher volumetric flow rates typical of heat pump primary circuits and large UFH manifolds without compromising filtration performance or system operation.
A fine stainless steel gauze captures non-magnetic debris and provides a surface for biological film removal — particularly relevant in open or semi-open systems where bacterial growth can develop. This dual mechanism addresses threats that magnetic filtration alone cannot.
The integrated one-way dosing valve allows ADEY MC1+ Protector or MC3+ Cleaner to be introduced without draining down the system. Quick and tool-free inhibitor dosing means annual servicing is straightforward — an important advantage in plant rooms with limited access.
28mm compression fittings and large-bore canister ports match the pipework dimensions typical of heat pump primary circuits, ensuring minimal restriction to the system. The 250.5mm × 115mm canister provides substantial debris-holding capacity between service intervals.
| Specification | Value |
|---|---|
| SKU | MAGNAHP |
| Application | Heat pumps, underfloor heating, low-temperature & renewable heating systems |
| Connection Size | 28mm compression |
| Max Operating Pressure | 6 bar |
| Max Flow Rate | Up to 80 litres/minute |
| Max Operating Temperature | 95°C |
| Body Material | Glass-reinforced nylon |
| Filtration Technology | CycloFlow™ magnetic + stainless steel gauze (non-magnetic) |
| Height | 250.5 mm |
| Width (at lid) | 115 mm |
| Installation Position | Indoor, return pipe (recommended) |
| Chemical Dosing | One-way valve (tool-free, no system drain required) |
| Warranty | 10 years (registration required) |
| EAN | 5060106370128 |
Original: $205.15
-65%$205.15
$71.80More Images
ADEY MagnaClean HP 28mm Filter for Heat Pumps & Low Temperature Systems
The ADEY MagnaClean HP is a purpose-engineered magnetic and non-magnetic system filter for heat pumps, underfloor heating, and low-temperature renewable heating systems. Featuring ADEY's patented CycloFlow™ Technology, it achieves exceptional first-pass capture of black iron oxide sludge and non-magnetic debris without restricting flow — even when the canister is full — protecting expensive heat pump equipment and maximising system efficiency. Backed by a 10-year warranty when registered, it is the benchmark filter for modern low-carbon heating installations.
Patented CycloFlow™ Technology generates a cyclonic flow that concentrates magnetic and non-magnetic particles at the magnet and gauze on the very first pass. This is critical in heat pump systems where lower flow velocities can cause debris to settle rather than be captured.
The MagnaClean HP is engineered to maintain system flow even when the canister is fully loaded with debris. In heat pump systems, any restriction in flow can trip safety cutouts and cause costly call-outs — the HP's non-blocking architecture eliminates this risk.
Supporting flows up to 80 litres per minute with minimal pressure drop, the HP handles the higher volumetric flow rates typical of heat pump primary circuits and large UFH manifolds without compromising filtration performance or system operation.
A fine stainless steel gauze captures non-magnetic debris and provides a surface for biological film removal — particularly relevant in open or semi-open systems where bacterial growth can develop. This dual mechanism addresses threats that magnetic filtration alone cannot.
The integrated one-way dosing valve allows ADEY MC1+ Protector or MC3+ Cleaner to be introduced without draining down the system. Quick and tool-free inhibitor dosing means annual servicing is straightforward — an important advantage in plant rooms with limited access.
28mm compression fittings and large-bore canister ports match the pipework dimensions typical of heat pump primary circuits, ensuring minimal restriction to the system. The 250.5mm × 115mm canister provides substantial debris-holding capacity between service intervals.
| Specification | Value |
|---|---|
| SKU | MAGNAHP |
| Application | Heat pumps, underfloor heating, low-temperature & renewable heating systems |
| Connection Size | 28mm compression |
| Max Operating Pressure | 6 bar |
| Max Flow Rate | Up to 80 litres/minute |
| Max Operating Temperature | 95°C |
| Body Material | Glass-reinforced nylon |
| Filtration Technology | CycloFlow™ magnetic + stainless steel gauze (non-magnetic) |
| Height | 250.5 mm |
| Width (at lid) | 115 mm |
| Installation Position | Indoor, return pipe (recommended) |
| Chemical Dosing | One-way valve (tool-free, no system drain required) |
| Warranty | 10 years (registration required) |
| EAN | 5060106370128 |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The ADEY MagnaClean HP is a purpose-engineered magnetic and non-magnetic system filter for heat pumps, underfloor heating, and low-temperature renewable heating systems. Featuring ADEY's patented CycloFlow™ Technology, it achieves exceptional first-pass capture of black iron oxide sludge and non-magnetic debris without restricting flow — even when the canister is full — protecting expensive heat pump equipment and maximising system efficiency. Backed by a 10-year warranty when registered, it is the benchmark filter for modern low-carbon heating installations.
Patented CycloFlow™ Technology generates a cyclonic flow that concentrates magnetic and non-magnetic particles at the magnet and gauze on the very first pass. This is critical in heat pump systems where lower flow velocities can cause debris to settle rather than be captured.
The MagnaClean HP is engineered to maintain system flow even when the canister is fully loaded with debris. In heat pump systems, any restriction in flow can trip safety cutouts and cause costly call-outs — the HP's non-blocking architecture eliminates this risk.
Supporting flows up to 80 litres per minute with minimal pressure drop, the HP handles the higher volumetric flow rates typical of heat pump primary circuits and large UFH manifolds without compromising filtration performance or system operation.
A fine stainless steel gauze captures non-magnetic debris and provides a surface for biological film removal — particularly relevant in open or semi-open systems where bacterial growth can develop. This dual mechanism addresses threats that magnetic filtration alone cannot.
The integrated one-way dosing valve allows ADEY MC1+ Protector or MC3+ Cleaner to be introduced without draining down the system. Quick and tool-free inhibitor dosing means annual servicing is straightforward — an important advantage in plant rooms with limited access.
28mm compression fittings and large-bore canister ports match the pipework dimensions typical of heat pump primary circuits, ensuring minimal restriction to the system. The 250.5mm × 115mm canister provides substantial debris-holding capacity between service intervals.
| Specification | Value |
|---|---|
| SKU | MAGNAHP |
| Application | Heat pumps, underfloor heating, low-temperature & renewable heating systems |
| Connection Size | 28mm compression |
| Max Operating Pressure | 6 bar |
| Max Flow Rate | Up to 80 litres/minute |
| Max Operating Temperature | 95°C |
| Body Material | Glass-reinforced nylon |
| Filtration Technology | CycloFlow™ magnetic + stainless steel gauze (non-magnetic) |
| Height | 250.5 mm |
| Width (at lid) | 115 mm |
| Installation Position | Indoor, return pipe (recommended) |
| Chemical Dosing | One-way valve (tool-free, no system drain required) |
| Warranty | 10 years (registration required) |
| EAN | 5060106370128 |
