ADEY MagnaClean Professional 2 Chemical Pack – Filter + MC1+ + MC3+
The ADEY MagnaClean Professional 2 Chemical Pack combines everything needed for a complete system protection and clean-up on a single job — the award-winning MagnaClean Professional 2 magnetic filter (22mm), a 500ml bottle of MC1+ Protector to prevent corrosion and limescale, and a 500ml bottle of MC3+ Cleaner to dissolve and disperse existing sludge. Buying as a pack saves time on ordering, reduces van stock complexity, and is the recommended single-visit solution for new boiler installs and first-time filter upgrades on existing systems.
The UK's best-selling domestic magnetic filter. Bi-directional in-line design, two-minute installation, and dual magnetic and non-magnetic filtration provide immediate and ongoing protection against black iron oxide sludge and debris. Compatible with all domestic wet heating systems.
MC1+ is ADEY's premium corrosion and scale inhibitor, formulated for use in closed wet central heating systems. It forms a protective film on metal surfaces, suppresses electrochemical corrosion between dissimilar metals, and prevents limescale deposition — extending the life of the boiler, heat exchanger, and system components.
MC3+ is ADEY's high-performance system cleaner, designed to dissolve and disperse iron oxide sludge, limescale, flux residues, and general debris from heating circuits. Dose into the system, run for a heating cycle, drain, flush, and follow up with MC1+. Fully compatible with the MagnaCleanse® power-flush system.
The Chemical Pack gives engineers everything to clean, filter, and protect in a single visit. Dose MC3+ first to shift residual sludge, circulate, drain, refit the filter canister, then dose MC1+ through the filter port to commission full inhibition — all without a return trip for additional materials.
Independent testing confirms that a clean, inhibited system protected by a MagnaClean filter reduces household heating energy consumption by up to 6% — lowering bills and carbon emissions simultaneously. The Chemical Pack ensures both the mechanical and chemical protection elements are in place from day one.
Both MC1+ and MC3+ are formulated and tested to comply with BS7593:2006 — the British Standard for treatment of water in domestic heating systems. This compliance is required by most boiler manufacturers as a condition of their extended warranty and by Building Regulations for new installations.
| Item | Detail |
|---|---|
| SKU | MAGPRO2PACK |
| Filter Included | MagnaClean Professional 2 — 22mm compression |
| Chemical 1 | ADEY MC1+ Protector — 500ml |
| Chemical 2 | ADEY MC3+ Cleaner — 500ml |
| Filter Max Pressure | 6 bar |
| Filter Max Temperature | 95°C |
| Filter Flow Rate | Up to 50 litres/minute |
| Chemical Standard | BS7593:2006 compliant; non-toxic; environmentally friendly |
| Filter Warranty | 2 years (registration required) |
Original: $230.79
-65%$230.79
$80.78More Images
ADEY MagnaClean Professional 2 Chemical Pack – Filter + MC1+ + MC3+
The ADEY MagnaClean Professional 2 Chemical Pack combines everything needed for a complete system protection and clean-up on a single job — the award-winning MagnaClean Professional 2 magnetic filter (22mm), a 500ml bottle of MC1+ Protector to prevent corrosion and limescale, and a 500ml bottle of MC3+ Cleaner to dissolve and disperse existing sludge. Buying as a pack saves time on ordering, reduces van stock complexity, and is the recommended single-visit solution for new boiler installs and first-time filter upgrades on existing systems.
The UK's best-selling domestic magnetic filter. Bi-directional in-line design, two-minute installation, and dual magnetic and non-magnetic filtration provide immediate and ongoing protection against black iron oxide sludge and debris. Compatible with all domestic wet heating systems.
MC1+ is ADEY's premium corrosion and scale inhibitor, formulated for use in closed wet central heating systems. It forms a protective film on metal surfaces, suppresses electrochemical corrosion between dissimilar metals, and prevents limescale deposition — extending the life of the boiler, heat exchanger, and system components.
MC3+ is ADEY's high-performance system cleaner, designed to dissolve and disperse iron oxide sludge, limescale, flux residues, and general debris from heating circuits. Dose into the system, run for a heating cycle, drain, flush, and follow up with MC1+. Fully compatible with the MagnaCleanse® power-flush system.
The Chemical Pack gives engineers everything to clean, filter, and protect in a single visit. Dose MC3+ first to shift residual sludge, circulate, drain, refit the filter canister, then dose MC1+ through the filter port to commission full inhibition — all without a return trip for additional materials.
Independent testing confirms that a clean, inhibited system protected by a MagnaClean filter reduces household heating energy consumption by up to 6% — lowering bills and carbon emissions simultaneously. The Chemical Pack ensures both the mechanical and chemical protection elements are in place from day one.
Both MC1+ and MC3+ are formulated and tested to comply with BS7593:2006 — the British Standard for treatment of water in domestic heating systems. This compliance is required by most boiler manufacturers as a condition of their extended warranty and by Building Regulations for new installations.
| Item | Detail |
|---|---|
| SKU | MAGPRO2PACK |
| Filter Included | MagnaClean Professional 2 — 22mm compression |
| Chemical 1 | ADEY MC1+ Protector — 500ml |
| Chemical 2 | ADEY MC3+ Cleaner — 500ml |
| Filter Max Pressure | 6 bar |
| Filter Max Temperature | 95°C |
| Filter Flow Rate | Up to 50 litres/minute |
| Chemical Standard | BS7593:2006 compliant; non-toxic; environmentally friendly |
| Filter Warranty | 2 years (registration required) |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The ADEY MagnaClean Professional 2 Chemical Pack combines everything needed for a complete system protection and clean-up on a single job — the award-winning MagnaClean Professional 2 magnetic filter (22mm), a 500ml bottle of MC1+ Protector to prevent corrosion and limescale, and a 500ml bottle of MC3+ Cleaner to dissolve and disperse existing sludge. Buying as a pack saves time on ordering, reduces van stock complexity, and is the recommended single-visit solution for new boiler installs and first-time filter upgrades on existing systems.
The UK's best-selling domestic magnetic filter. Bi-directional in-line design, two-minute installation, and dual magnetic and non-magnetic filtration provide immediate and ongoing protection against black iron oxide sludge and debris. Compatible with all domestic wet heating systems.
MC1+ is ADEY's premium corrosion and scale inhibitor, formulated for use in closed wet central heating systems. It forms a protective film on metal surfaces, suppresses electrochemical corrosion between dissimilar metals, and prevents limescale deposition — extending the life of the boiler, heat exchanger, and system components.
MC3+ is ADEY's high-performance system cleaner, designed to dissolve and disperse iron oxide sludge, limescale, flux residues, and general debris from heating circuits. Dose into the system, run for a heating cycle, drain, flush, and follow up with MC1+. Fully compatible with the MagnaCleanse® power-flush system.
The Chemical Pack gives engineers everything to clean, filter, and protect in a single visit. Dose MC3+ first to shift residual sludge, circulate, drain, refit the filter canister, then dose MC1+ through the filter port to commission full inhibition — all without a return trip for additional materials.
Independent testing confirms that a clean, inhibited system protected by a MagnaClean filter reduces household heating energy consumption by up to 6% — lowering bills and carbon emissions simultaneously. The Chemical Pack ensures both the mechanical and chemical protection elements are in place from day one.
Both MC1+ and MC3+ are formulated and tested to comply with BS7593:2006 — the British Standard for treatment of water in domestic heating systems. This compliance is required by most boiler manufacturers as a condition of their extended warranty and by Building Regulations for new installations.
| Item | Detail |
|---|---|
| SKU | MAGPRO2PACK |
| Filter Included | MagnaClean Professional 2 — 22mm compression |
| Chemical 1 | ADEY MC1+ Protector — 500ml |
| Chemical 2 | ADEY MC3+ Cleaner — 500ml |
| Filter Max Pressure | 6 bar |
| Filter Max Temperature | 95°C |
| Filter Flow Rate | Up to 50 litres/minute |
| Chemical Standard | BS7593:2006 compliant; non-toxic; environmentally friendly |
| Filter Warranty | 2 years (registration required) |
