Honeywell Home R200C-N1 Interconnected Carbon Monoxide Alarm 10 Year Battery Radio Interlink
Honeywell Home R200C-N1 Interconnected Carbon Monoxide Alarm 10 Year Battery Radio Interlink
The Honeywell Home R200C-N1 is a radio-interlinked carbon monoxide (CO) alarm that adds wireless network capability to the proven CO detection of the stand-alone R200C-1. Powered by a sealed 10-year lithium battery with an equally long-lived electrochemical CO sensor, it requires no maintenance for a decade. The built-in RF interlink module connects wirelessly with up to 11 other compatible Honeywell Home R200 series alarms — when CO is detected, every linked alarm sounds simultaneously, warning all occupants throughout the property regardless of where the hazard originates. The alarm is BSI Kitemarked to BS EN 50291-1, CE and UKCA marked, and meets the 2022 UK CO alarm legislation for homes in England, Scotland, and Wales — making it ideal for whole-home protection in interlinked Grade F1 systems.
50291‑1
The built-in RF radio interlink module wirelessly connects with up to 11 other Honeywell Home R200 series alarms (CO, smoke, and heat). When CO is detected by the R200C-N1, all linked alarms activate simultaneously — a critical safety feature in multi-storey homes or properties where occupants may be sleeping far from the CO source. No wiring or hub is required.
The electrochemical CO sensor is rated for the same 10-year service life as the battery — no mid-life sensor replacement is needed. The sensor responds accurately at the legally required CO concentration thresholds defined by BS EN 50291-1, and its performance is maintained throughout the alarm's full service life, confirmed by the matching 10-year manufacturer warranty.
A permanently sealed, tamper-proof lithium battery pack powers the alarm for a decade without any battery replacement. The low-power standby chip preserves battery life between activations. At end of life, a clear end-of-life warning signal indicates the whole alarm requires replacement, preventing any undetected gap in CO protection.
Three dedicated LED indicators provide instant status clarity: a green POWER LED (flashes every minute in normal operation), a red ALARM LED (flashes rapidly when CO is detected), and a yellow FAULT LED (indicates a fault condition). The entire front face also acts as the test/silence button — press and hold to test, press briefly to silence.
The super-slim profile keeps the alarm discreet on wall or ceiling, and the optional tamper-proof locking feature (via a small break-off cylinder on the bracket) prevents unauthorised removal — an important compliance feature for rental properties where landlords need assurance that alarms remain in place between tenancy inspections.
The R200C-N1 carries BSI Kitemark certification to BS EN 50291-1 and is CE and UKCA marked. It meets the requirements of the 2022 CO alarm legislation for homes in England, Scotland, and Wales, and is suitable for use as part of a BS 5839-6 Grade F1 interlinked system — combining with R200S-N1 smoke alarms and R200H-N1 heat alarms for complete home coverage.
| Model | R200C-N1 |
| Alarm Type | Interconnected Carbon Monoxide (CO) Alarm |
| Sensor Technology | Electrochemical CO sensor |
| Sensor Life | 10 years |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect Technology | Radio Frequency (RF) wireless interlink |
| Max Interconnected Alarms | 12 (this unit + 11 others) |
| Compatible Alarm Types | R200 series CO, smoke, and heat alarms |
| LED Indicators | Green (POWER), Red (ALARM), Yellow (FAULT) |
| Normal Mode LED Flash | Green LED: 1× every minute |
| Fault Silence Duration | Up to 9 hours |
| Tamper-Proof Feature | Optional locking cylinder on wall bracket |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, BS EN 50291-1 |
| Suitable System Grade | BS 5839-6 Grade F1 |
| Legislation Compliance | 2022 England, Scotland & Wales CO alarm home legislation |
| Mounting | Wall or ceiling mount; bayonet bracket with optional tamper lock |
| Colour | White |
What is the difference between the R200C-1 and the R200C-N1?
Can the R200C-N1 interlink with R200S-N1 smoke alarms and R200H-N1 heat alarms?
Does the 10-year sensor life mean the alarm is accurate throughout its life?
Is the R200C-N1 required by law in rental properties?
How do I test the R200C-N1, and how often should I test it?
Original: $45.89
-65%$45.89
$16.06Honeywell Home R200C-N1 Interconnected Carbon Monoxide Alarm 10 Year Battery Radio Interlink
The Honeywell Home R200C-N1 is a radio-interlinked carbon monoxide (CO) alarm that adds wireless network capability to the proven CO detection of the stand-alone R200C-1. Powered by a sealed 10-year lithium battery with an equally long-lived electrochemical CO sensor, it requires no maintenance for a decade. The built-in RF interlink module connects wirelessly with up to 11 other compatible Honeywell Home R200 series alarms — when CO is detected, every linked alarm sounds simultaneously, warning all occupants throughout the property regardless of where the hazard originates. The alarm is BSI Kitemarked to BS EN 50291-1, CE and UKCA marked, and meets the 2022 UK CO alarm legislation for homes in England, Scotland, and Wales — making it ideal for whole-home protection in interlinked Grade F1 systems.
50291‑1
The built-in RF radio interlink module wirelessly connects with up to 11 other Honeywell Home R200 series alarms (CO, smoke, and heat). When CO is detected by the R200C-N1, all linked alarms activate simultaneously — a critical safety feature in multi-storey homes or properties where occupants may be sleeping far from the CO source. No wiring or hub is required.
The electrochemical CO sensor is rated for the same 10-year service life as the battery — no mid-life sensor replacement is needed. The sensor responds accurately at the legally required CO concentration thresholds defined by BS EN 50291-1, and its performance is maintained throughout the alarm's full service life, confirmed by the matching 10-year manufacturer warranty.
A permanently sealed, tamper-proof lithium battery pack powers the alarm for a decade without any battery replacement. The low-power standby chip preserves battery life between activations. At end of life, a clear end-of-life warning signal indicates the whole alarm requires replacement, preventing any undetected gap in CO protection.
Three dedicated LED indicators provide instant status clarity: a green POWER LED (flashes every minute in normal operation), a red ALARM LED (flashes rapidly when CO is detected), and a yellow FAULT LED (indicates a fault condition). The entire front face also acts as the test/silence button — press and hold to test, press briefly to silence.
The super-slim profile keeps the alarm discreet on wall or ceiling, and the optional tamper-proof locking feature (via a small break-off cylinder on the bracket) prevents unauthorised removal — an important compliance feature for rental properties where landlords need assurance that alarms remain in place between tenancy inspections.
The R200C-N1 carries BSI Kitemark certification to BS EN 50291-1 and is CE and UKCA marked. It meets the requirements of the 2022 CO alarm legislation for homes in England, Scotland, and Wales, and is suitable for use as part of a BS 5839-6 Grade F1 interlinked system — combining with R200S-N1 smoke alarms and R200H-N1 heat alarms for complete home coverage.
| Model | R200C-N1 |
| Alarm Type | Interconnected Carbon Monoxide (CO) Alarm |
| Sensor Technology | Electrochemical CO sensor |
| Sensor Life | 10 years |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect Technology | Radio Frequency (RF) wireless interlink |
| Max Interconnected Alarms | 12 (this unit + 11 others) |
| Compatible Alarm Types | R200 series CO, smoke, and heat alarms |
| LED Indicators | Green (POWER), Red (ALARM), Yellow (FAULT) |
| Normal Mode LED Flash | Green LED: 1× every minute |
| Fault Silence Duration | Up to 9 hours |
| Tamper-Proof Feature | Optional locking cylinder on wall bracket |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, BS EN 50291-1 |
| Suitable System Grade | BS 5839-6 Grade F1 |
| Legislation Compliance | 2022 England, Scotland & Wales CO alarm home legislation |
| Mounting | Wall or ceiling mount; bayonet bracket with optional tamper lock |
| Colour | White |
What is the difference between the R200C-1 and the R200C-N1?
Can the R200C-N1 interlink with R200S-N1 smoke alarms and R200H-N1 heat alarms?
Does the 10-year sensor life mean the alarm is accurate throughout its life?
Is the R200C-N1 required by law in rental properties?
How do I test the R200C-N1, and how often should I test it?
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Honeywell Home R200C-N1 is a radio-interlinked carbon monoxide (CO) alarm that adds wireless network capability to the proven CO detection of the stand-alone R200C-1. Powered by a sealed 10-year lithium battery with an equally long-lived electrochemical CO sensor, it requires no maintenance for a decade. The built-in RF interlink module connects wirelessly with up to 11 other compatible Honeywell Home R200 series alarms — when CO is detected, every linked alarm sounds simultaneously, warning all occupants throughout the property regardless of where the hazard originates. The alarm is BSI Kitemarked to BS EN 50291-1, CE and UKCA marked, and meets the 2022 UK CO alarm legislation for homes in England, Scotland, and Wales — making it ideal for whole-home protection in interlinked Grade F1 systems.
50291‑1
The built-in RF radio interlink module wirelessly connects with up to 11 other Honeywell Home R200 series alarms (CO, smoke, and heat). When CO is detected by the R200C-N1, all linked alarms activate simultaneously — a critical safety feature in multi-storey homes or properties where occupants may be sleeping far from the CO source. No wiring or hub is required.
The electrochemical CO sensor is rated for the same 10-year service life as the battery — no mid-life sensor replacement is needed. The sensor responds accurately at the legally required CO concentration thresholds defined by BS EN 50291-1, and its performance is maintained throughout the alarm's full service life, confirmed by the matching 10-year manufacturer warranty.
A permanently sealed, tamper-proof lithium battery pack powers the alarm for a decade without any battery replacement. The low-power standby chip preserves battery life between activations. At end of life, a clear end-of-life warning signal indicates the whole alarm requires replacement, preventing any undetected gap in CO protection.
Three dedicated LED indicators provide instant status clarity: a green POWER LED (flashes every minute in normal operation), a red ALARM LED (flashes rapidly when CO is detected), and a yellow FAULT LED (indicates a fault condition). The entire front face also acts as the test/silence button — press and hold to test, press briefly to silence.
The super-slim profile keeps the alarm discreet on wall or ceiling, and the optional tamper-proof locking feature (via a small break-off cylinder on the bracket) prevents unauthorised removal — an important compliance feature for rental properties where landlords need assurance that alarms remain in place between tenancy inspections.
The R200C-N1 carries BSI Kitemark certification to BS EN 50291-1 and is CE and UKCA marked. It meets the requirements of the 2022 CO alarm legislation for homes in England, Scotland, and Wales, and is suitable for use as part of a BS 5839-6 Grade F1 interlinked system — combining with R200S-N1 smoke alarms and R200H-N1 heat alarms for complete home coverage.
| Model | R200C-N1 |
| Alarm Type | Interconnected Carbon Monoxide (CO) Alarm |
| Sensor Technology | Electrochemical CO sensor |
| Sensor Life | 10 years |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect Technology | Radio Frequency (RF) wireless interlink |
| Max Interconnected Alarms | 12 (this unit + 11 others) |
| Compatible Alarm Types | R200 series CO, smoke, and heat alarms |
| LED Indicators | Green (POWER), Red (ALARM), Yellow (FAULT) |
| Normal Mode LED Flash | Green LED: 1× every minute |
| Fault Silence Duration | Up to 9 hours |
| Tamper-Proof Feature | Optional locking cylinder on wall bracket |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, BS EN 50291-1 |
| Suitable System Grade | BS 5839-6 Grade F1 |
| Legislation Compliance | 2022 England, Scotland & Wales CO alarm home legislation |
| Mounting | Wall or ceiling mount; bayonet bracket with optional tamper lock |
| Colour | White |
