Honeywell Home R200S-1 Stand-Alone Optical Smoke Alarm 10 Year Battery
The Honeywell Home R200S-1 is a stand-alone optical smoke alarm with a sealed 10-year lithium battery — designed to deliver a decade of reliable fire detection with zero maintenance. Its optical (photoelectric) sensor is highly effective at detecting slow-burning, smouldering fires, the type most likely to develop undetected in living rooms, bedrooms, and hallways during the night. The ultra-slim body, large front-face test/silence button, and automatic self-testing electronics make the R200S-1 a practical choice for homeowners, social housing, and landlords looking for a low-complexity, high-reliability smoke alarm that meets the 2022 UK fire alarm legislation for homes.
The R200S-1 uses an optical photoelectric sensor that detects changes in light scattering caused by smoke particles. This technology is particularly sensitive to slow-smouldering fires — the type that produce large quantities of smoke before flames develop — making it well-suited to living rooms, bedrooms, and hallways where this fire type is most prevalent.
A tamper-proof, sealed-for-life lithium battery powers the alarm for its entire 10-year service life without any battery replacement. The low-power chip maximises battery efficiency in standby mode. An end-of-life signal clearly alerts you when the full unit needs replacing, preventing any gap in protection.
The R200S-1 automatically tests its sensor and electronics on a periodic basis to identify any fault conditions without requiring manual intervention. If a fault is detected, a clearly distinguishable audible fault tone sounds to alert the occupant, and fault tones can be silenced for up to 9 hours while the issue is investigated.
The 85 dB high-output sounder ensures the alarm can be heard clearly throughout a typical home. In the event of a nuisance activation — for example, from toast smoke drifting from a nearby kitchen — the entire front face of the alarm functions as a button to silence the sounder for up to 10 minutes, giving time for the air to clear without disabling the alarm entirely.
The ultra-thin, compact body minimises visual impact on ceilings and walls, making it one of the most discreet battery smoke alarms available. Installation uses a simple bayonet bracket system that attaches to ceiling or wall with minimal tools. The stand-alone design means no wiring or interconnection is needed for a basic installation.
Honeywell (Resideo) back the R200S-1 with a full 10-year manufacturer warranty, matching the designed service life of the unit. The alarm is BSI Kitemarked to EN 14604:2005+AC:2008, CE and UKCA marked, and meets the requirements of the 2022 UK fire alarm legislation for homes, making it suitable for both owner-occupied and rental properties.
| Model | R200S-1 |
| Alarm Type | Stand-Alone Optical Smoke Alarm |
| Sensor Technology | Optical (photoelectric) smoke sensor |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect | Stand-alone (no interlink) |
| Hush Duration | Up to 10 minutes |
| Fault Silence Duration | Up to 9 hours |
| Self-Test | Automatic periodic self-test (sensor & electronics) |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, EN 14604:2005+AC:2008 |
| Legislation Compliance | 2022 England, Scotland & Wales fire alarm home legislation |
| Mounting | Ceiling or wall mount; bayonet bracket |
| Colour | White |
What is the difference between an optical and an ionisation smoke alarm?
Where should I install the R200S-1 in my home?
Can the R200S-1 be interconnected with other alarms?
What does the hush function do, and is it safe to use?
Original: $45.89
-65%$45.89
$16.06Honeywell Home R200S-1 Stand-Alone Optical Smoke Alarm 10 Year Battery
The Honeywell Home R200S-1 is a stand-alone optical smoke alarm with a sealed 10-year lithium battery — designed to deliver a decade of reliable fire detection with zero maintenance. Its optical (photoelectric) sensor is highly effective at detecting slow-burning, smouldering fires, the type most likely to develop undetected in living rooms, bedrooms, and hallways during the night. The ultra-slim body, large front-face test/silence button, and automatic self-testing electronics make the R200S-1 a practical choice for homeowners, social housing, and landlords looking for a low-complexity, high-reliability smoke alarm that meets the 2022 UK fire alarm legislation for homes.
The R200S-1 uses an optical photoelectric sensor that detects changes in light scattering caused by smoke particles. This technology is particularly sensitive to slow-smouldering fires — the type that produce large quantities of smoke before flames develop — making it well-suited to living rooms, bedrooms, and hallways where this fire type is most prevalent.
A tamper-proof, sealed-for-life lithium battery powers the alarm for its entire 10-year service life without any battery replacement. The low-power chip maximises battery efficiency in standby mode. An end-of-life signal clearly alerts you when the full unit needs replacing, preventing any gap in protection.
The R200S-1 automatically tests its sensor and electronics on a periodic basis to identify any fault conditions without requiring manual intervention. If a fault is detected, a clearly distinguishable audible fault tone sounds to alert the occupant, and fault tones can be silenced for up to 9 hours while the issue is investigated.
The 85 dB high-output sounder ensures the alarm can be heard clearly throughout a typical home. In the event of a nuisance activation — for example, from toast smoke drifting from a nearby kitchen — the entire front face of the alarm functions as a button to silence the sounder for up to 10 minutes, giving time for the air to clear without disabling the alarm entirely.
The ultra-thin, compact body minimises visual impact on ceilings and walls, making it one of the most discreet battery smoke alarms available. Installation uses a simple bayonet bracket system that attaches to ceiling or wall with minimal tools. The stand-alone design means no wiring or interconnection is needed for a basic installation.
Honeywell (Resideo) back the R200S-1 with a full 10-year manufacturer warranty, matching the designed service life of the unit. The alarm is BSI Kitemarked to EN 14604:2005+AC:2008, CE and UKCA marked, and meets the requirements of the 2022 UK fire alarm legislation for homes, making it suitable for both owner-occupied and rental properties.
| Model | R200S-1 |
| Alarm Type | Stand-Alone Optical Smoke Alarm |
| Sensor Technology | Optical (photoelectric) smoke sensor |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect | Stand-alone (no interlink) |
| Hush Duration | Up to 10 minutes |
| Fault Silence Duration | Up to 9 hours |
| Self-Test | Automatic periodic self-test (sensor & electronics) |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, EN 14604:2005+AC:2008 |
| Legislation Compliance | 2022 England, Scotland & Wales fire alarm home legislation |
| Mounting | Ceiling or wall mount; bayonet bracket |
| Colour | White |
What is the difference between an optical and an ionisation smoke alarm?
Where should I install the R200S-1 in my home?
Can the R200S-1 be interconnected with other alarms?
What does the hush function do, and is it safe to use?
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Honeywell Home R200S-1 is a stand-alone optical smoke alarm with a sealed 10-year lithium battery — designed to deliver a decade of reliable fire detection with zero maintenance. Its optical (photoelectric) sensor is highly effective at detecting slow-burning, smouldering fires, the type most likely to develop undetected in living rooms, bedrooms, and hallways during the night. The ultra-slim body, large front-face test/silence button, and automatic self-testing electronics make the R200S-1 a practical choice for homeowners, social housing, and landlords looking for a low-complexity, high-reliability smoke alarm that meets the 2022 UK fire alarm legislation for homes.
The R200S-1 uses an optical photoelectric sensor that detects changes in light scattering caused by smoke particles. This technology is particularly sensitive to slow-smouldering fires — the type that produce large quantities of smoke before flames develop — making it well-suited to living rooms, bedrooms, and hallways where this fire type is most prevalent.
A tamper-proof, sealed-for-life lithium battery powers the alarm for its entire 10-year service life without any battery replacement. The low-power chip maximises battery efficiency in standby mode. An end-of-life signal clearly alerts you when the full unit needs replacing, preventing any gap in protection.
The R200S-1 automatically tests its sensor and electronics on a periodic basis to identify any fault conditions without requiring manual intervention. If a fault is detected, a clearly distinguishable audible fault tone sounds to alert the occupant, and fault tones can be silenced for up to 9 hours while the issue is investigated.
The 85 dB high-output sounder ensures the alarm can be heard clearly throughout a typical home. In the event of a nuisance activation — for example, from toast smoke drifting from a nearby kitchen — the entire front face of the alarm functions as a button to silence the sounder for up to 10 minutes, giving time for the air to clear without disabling the alarm entirely.
The ultra-thin, compact body minimises visual impact on ceilings and walls, making it one of the most discreet battery smoke alarms available. Installation uses a simple bayonet bracket system that attaches to ceiling or wall with minimal tools. The stand-alone design means no wiring or interconnection is needed for a basic installation.
Honeywell (Resideo) back the R200S-1 with a full 10-year manufacturer warranty, matching the designed service life of the unit. The alarm is BSI Kitemarked to EN 14604:2005+AC:2008, CE and UKCA marked, and meets the requirements of the 2022 UK fire alarm legislation for homes, making it suitable for both owner-occupied and rental properties.
| Model | R200S-1 |
| Alarm Type | Stand-Alone Optical Smoke Alarm |
| Sensor Technology | Optical (photoelectric) smoke sensor |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect | Stand-alone (no interlink) |
| Hush Duration | Up to 10 minutes |
| Fault Silence Duration | Up to 9 hours |
| Self-Test | Automatic periodic self-test (sensor & electronics) |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, EN 14604:2005+AC:2008 |
| Legislation Compliance | 2022 England, Scotland & Wales fire alarm home legislation |
| Mounting | Ceiling or wall mount; bayonet bracket |
| Colour | White |
