Honeywell Home R200C-1 Stand-Alone Carbon Monoxide Alarm 10 Year Battery
The Honeywell Home R200C-1 is a stand-alone carbon monoxide (CO) alarm built for straightforward, no-fuss protection in any room containing a fuel-burning appliance. Powered by a sealed 10-year lithium battery with a matching 10-year electrochemical CO sensor, the unit is entirely maintenance-free for a decade — no battery changes, no sensor swaps. Its super-slim 25 mm depth makes it one of the most discreet CO alarms on the market, and the entire front face serves as a large, easy-to-press test/silence button. A bright red flashing "ALARM" text display, rated 85 dB sounder, auto-dimming green power LED, IP44-rated housing, and 48-hour alarm memory round out a feature set that comfortably satisfies landlord compliance requirements and the 2022 UK CO alarm regulations.
A permanently sealed, non-replaceable lithium battery powers the alarm for its full 10-year service life. A dedicated low-power chip conserves energy in standby mode to ensure the battery lasts the rated lifespan without any maintenance. An end-of-life signal alerts you when the unit needs replacing.
The electrochemical CO sensor is rated for the same 10-year service life as the battery, meaning no mid-life sensor replacement is required. Detection accuracy is maintained throughout the unit's lifespan, and the sensor responds appropriately at the threshold concentrations defined by BS EN 50291-1.
When CO is detected, a bright red "ALARM" text flashes on the front face alongside the 85 dB sounder, providing both visual and audible alerts. The visual indicator makes this alarm particularly suitable for households with hard-of-hearing occupants. The green power LED automatically dims at night to avoid disturbing sleep.
The alarm memory stores alert status for 48 hours, so you can check whether CO was detected while you were out or asleep. This feature is especially valuable in rental properties and second homes where occupancy is intermittent, providing evidence of a CO event even after the alarm has reset.
An IP44 ingress protection rating makes the R200C-1 resistant to dust intrusion and water splashes from any direction. This means it can be safely installed in bathrooms, conservatories, utility rooms, and other damp-prone areas — an advantage over many basic CO alarms with no IP rating.
At just 25 mm depth, the R200C-1 is among the slimmest domestic CO alarms available. The entire front surface acts as a test/silence button, removing the need for a small recessed button and making weekly testing straightforward. The tamper-proof design also meets landlord compliance requirements under current legislation.
| Model | R200C-1 |
| Alarm Type | Stand-Alone Carbon Monoxide (CO) Alarm |
| Sensor Technology | Electrochemical CO sensor |
| Sensor Life | 10 years |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect | Stand-alone (no interlink) |
| Depth | 25 mm |
| Ingress Protection | IP44 |
| Alarm Memory | 48 hours |
| Fault Silence Duration | Up to 9 hours |
| Visual Alert | Flashing red "ALARM" text display |
| Power Indicator | Auto-dimming green LED |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, BS EN 50291-1 |
| Legislation Compliance | 2022 England, Scotland & Wales CO alarm home legislation |
| Mounting | Wall or ceiling mount |
| Colour | White |
Where should I install a CO alarm in my home?
Does the R200C-1 need a battery change during its 10-year life?
What should I do if the R200C-1 alarm sounds?
Can the R200C-1 be installed in a bathroom or damp room?
Is the R200C-1 suitable for landlord compliance under UK law?
Original: $45.89
-65%$45.89
$16.06Honeywell Home R200C-1 Stand-Alone Carbon Monoxide Alarm 10 Year Battery
The Honeywell Home R200C-1 is a stand-alone carbon monoxide (CO) alarm built for straightforward, no-fuss protection in any room containing a fuel-burning appliance. Powered by a sealed 10-year lithium battery with a matching 10-year electrochemical CO sensor, the unit is entirely maintenance-free for a decade — no battery changes, no sensor swaps. Its super-slim 25 mm depth makes it one of the most discreet CO alarms on the market, and the entire front face serves as a large, easy-to-press test/silence button. A bright red flashing "ALARM" text display, rated 85 dB sounder, auto-dimming green power LED, IP44-rated housing, and 48-hour alarm memory round out a feature set that comfortably satisfies landlord compliance requirements and the 2022 UK CO alarm regulations.
A permanently sealed, non-replaceable lithium battery powers the alarm for its full 10-year service life. A dedicated low-power chip conserves energy in standby mode to ensure the battery lasts the rated lifespan without any maintenance. An end-of-life signal alerts you when the unit needs replacing.
The electrochemical CO sensor is rated for the same 10-year service life as the battery, meaning no mid-life sensor replacement is required. Detection accuracy is maintained throughout the unit's lifespan, and the sensor responds appropriately at the threshold concentrations defined by BS EN 50291-1.
When CO is detected, a bright red "ALARM" text flashes on the front face alongside the 85 dB sounder, providing both visual and audible alerts. The visual indicator makes this alarm particularly suitable for households with hard-of-hearing occupants. The green power LED automatically dims at night to avoid disturbing sleep.
The alarm memory stores alert status for 48 hours, so you can check whether CO was detected while you were out or asleep. This feature is especially valuable in rental properties and second homes where occupancy is intermittent, providing evidence of a CO event even after the alarm has reset.
An IP44 ingress protection rating makes the R200C-1 resistant to dust intrusion and water splashes from any direction. This means it can be safely installed in bathrooms, conservatories, utility rooms, and other damp-prone areas — an advantage over many basic CO alarms with no IP rating.
At just 25 mm depth, the R200C-1 is among the slimmest domestic CO alarms available. The entire front surface acts as a test/silence button, removing the need for a small recessed button and making weekly testing straightforward. The tamper-proof design also meets landlord compliance requirements under current legislation.
| Model | R200C-1 |
| Alarm Type | Stand-Alone Carbon Monoxide (CO) Alarm |
| Sensor Technology | Electrochemical CO sensor |
| Sensor Life | 10 years |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect | Stand-alone (no interlink) |
| Depth | 25 mm |
| Ingress Protection | IP44 |
| Alarm Memory | 48 hours |
| Fault Silence Duration | Up to 9 hours |
| Visual Alert | Flashing red "ALARM" text display |
| Power Indicator | Auto-dimming green LED |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, BS EN 50291-1 |
| Legislation Compliance | 2022 England, Scotland & Wales CO alarm home legislation |
| Mounting | Wall or ceiling mount |
| Colour | White |
Where should I install a CO alarm in my home?
Does the R200C-1 need a battery change during its 10-year life?
What should I do if the R200C-1 alarm sounds?
Can the R200C-1 be installed in a bathroom or damp room?
Is the R200C-1 suitable for landlord compliance under UK law?
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Honeywell Home R200C-1 is a stand-alone carbon monoxide (CO) alarm built for straightforward, no-fuss protection in any room containing a fuel-burning appliance. Powered by a sealed 10-year lithium battery with a matching 10-year electrochemical CO sensor, the unit is entirely maintenance-free for a decade — no battery changes, no sensor swaps. Its super-slim 25 mm depth makes it one of the most discreet CO alarms on the market, and the entire front face serves as a large, easy-to-press test/silence button. A bright red flashing "ALARM" text display, rated 85 dB sounder, auto-dimming green power LED, IP44-rated housing, and 48-hour alarm memory round out a feature set that comfortably satisfies landlord compliance requirements and the 2022 UK CO alarm regulations.
A permanently sealed, non-replaceable lithium battery powers the alarm for its full 10-year service life. A dedicated low-power chip conserves energy in standby mode to ensure the battery lasts the rated lifespan without any maintenance. An end-of-life signal alerts you when the unit needs replacing.
The electrochemical CO sensor is rated for the same 10-year service life as the battery, meaning no mid-life sensor replacement is required. Detection accuracy is maintained throughout the unit's lifespan, and the sensor responds appropriately at the threshold concentrations defined by BS EN 50291-1.
When CO is detected, a bright red "ALARM" text flashes on the front face alongside the 85 dB sounder, providing both visual and audible alerts. The visual indicator makes this alarm particularly suitable for households with hard-of-hearing occupants. The green power LED automatically dims at night to avoid disturbing sleep.
The alarm memory stores alert status for 48 hours, so you can check whether CO was detected while you were out or asleep. This feature is especially valuable in rental properties and second homes where occupancy is intermittent, providing evidence of a CO event even after the alarm has reset.
An IP44 ingress protection rating makes the R200C-1 resistant to dust intrusion and water splashes from any direction. This means it can be safely installed in bathrooms, conservatories, utility rooms, and other damp-prone areas — an advantage over many basic CO alarms with no IP rating.
At just 25 mm depth, the R200C-1 is among the slimmest domestic CO alarms available. The entire front surface acts as a test/silence button, removing the need for a small recessed button and making weekly testing straightforward. The tamper-proof design also meets landlord compliance requirements under current legislation.
| Model | R200C-1 |
| Alarm Type | Stand-Alone Carbon Monoxide (CO) Alarm |
| Sensor Technology | Electrochemical CO sensor |
| Sensor Life | 10 years |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect | Stand-alone (no interlink) |
| Depth | 25 mm |
| Ingress Protection | IP44 |
| Alarm Memory | 48 hours |
| Fault Silence Duration | Up to 9 hours |
| Visual Alert | Flashing red "ALARM" text display |
| Power Indicator | Auto-dimming green LED |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, BS EN 50291-1 |
| Legislation Compliance | 2022 England, Scotland & Wales CO alarm home legislation |
| Mounting | Wall or ceiling mount |
| Colour | White |
