Honeywell Home R200S-N1 Interconnected Optical Smoke Alarm 10 Year Battery Radio Interlink
The Honeywell Home R200S-N1 is a radio-interlinked optical smoke alarm combining a sealed 10-year lithium battery with a built-in RF wireless interlink module — the key upgrade over the stand-alone R200S-1. Once paired with other compatible Honeywell Home R200 series alarms, a hazard detected by any single unit triggers all connected alarms simultaneously, creating a fully synchronised warning system across your entire property without a single cable. With coverage for up to 12 alarms in one network (including smoke, heat, and CO models), the R200S-N1 is the foundation of a compliant BS 5839-6 Grade F1 interlinked fire and CO system. It meets the 2022 England, Scotland, and Wales fire alarm legislation for homes and carries BSI Kitemark certification to EN 14604:2005.
The built-in RF radio interlink module connects wirelessly with up to 11 additional compatible Honeywell Home R200 series alarms — mix smoke, heat, and CO units freely. When any alarm in the network triggers, all connected alarms sound simultaneously, ensuring occupants on every floor and in every room receive the warning immediately.
The optical (photoelectric) sensor detects the large smoke particles produced by slow-smouldering fires — the most common type in domestic settings (burning upholstery, overheating electrical equipment). This sensor type produces fewer nuisance alarms than ionisation types and is the preferred choice for living rooms, bedrooms, hallways, and landings.
The tamper-proof, sealed-for-life lithium battery powers the alarm for the entire 10-year service life, assisted by a low-power standby chip. There are no battery changes required, and the alarm signals end of life with a distinct tone. The tamper-proof design also satisfies landlord compliance requirements under current UK legislation.
The R200S-N1 automatically self-tests its sensor and electronics periodically, without user action. Any identified fault is clearly indicated by a distinguishable audible fault tone separate from the alarm tone. Fault tones can be silenced for up to 9 hours while investigating and resolving the issue, reducing nuisance noise.
A high-output 85 dB sounder ensures the alarm signal is audible throughout the property. The 10-minute hush function — activated by pressing anywhere on the front face — silences the sounder without disabling detection, allowing time for non-hazardous smoke to disperse. Detection continues throughout the hush period.
The ultra-slim body sits close to the ceiling surface, minimising visual impact. The large front face also serves as the test/silence button, making routine weekly testing straightforward. Compatible with the full Honeywell Home R200 range for a unified, consistent appearance throughout the property when mixing alarm types.
| Model | R200S-N1 |
| Alarm Type | Interconnected Optical Smoke Alarm |
| Sensor Technology | Optical (photoelectric) smoke sensor |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect Technology | Radio Frequency (RF) wireless interlink |
| Max Interconnected Alarms | 12 (this unit + 11 others) |
| Compatible Alarm Types | R200 series smoke, heat, and CO alarms |
| Hush Duration | Up to 10 minutes |
| Fault Silence Duration | Up to 9 hours |
| Self-Test | Automatic periodic self-test (sensor & electronics) |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, EN 14604:2005+AC:2008, VdS, NF, SBSC, Q Label, B-Mark |
| Suitable System Grade | BS 5839-6 Grade F1 |
| Legislation Compliance | 2022 England, Scotland & Wales fire alarm home legislation |
| Mounting | Ceiling or wall mount; bayonet bracket |
| Colour | White |
What is the difference between the R200S-1 and the R200S-N1?
Can I mix R200S-N1 smoke alarms with R200H-N1 heat alarms and R200C-N1 CO alarms in one system?
How do I interconnect multiple R200S-N1 alarms?
Does this alarm meet the Scottish Government's fire alarm requirements?
Is the R200S-N1 suitable for landlords and rental properties?
Original: $58.04
-65%$58.04
$20.31Honeywell Home R200S-N1 Interconnected Optical Smoke Alarm 10 Year Battery Radio Interlink
The Honeywell Home R200S-N1 is a radio-interlinked optical smoke alarm combining a sealed 10-year lithium battery with a built-in RF wireless interlink module — the key upgrade over the stand-alone R200S-1. Once paired with other compatible Honeywell Home R200 series alarms, a hazard detected by any single unit triggers all connected alarms simultaneously, creating a fully synchronised warning system across your entire property without a single cable. With coverage for up to 12 alarms in one network (including smoke, heat, and CO models), the R200S-N1 is the foundation of a compliant BS 5839-6 Grade F1 interlinked fire and CO system. It meets the 2022 England, Scotland, and Wales fire alarm legislation for homes and carries BSI Kitemark certification to EN 14604:2005.
The built-in RF radio interlink module connects wirelessly with up to 11 additional compatible Honeywell Home R200 series alarms — mix smoke, heat, and CO units freely. When any alarm in the network triggers, all connected alarms sound simultaneously, ensuring occupants on every floor and in every room receive the warning immediately.
The optical (photoelectric) sensor detects the large smoke particles produced by slow-smouldering fires — the most common type in domestic settings (burning upholstery, overheating electrical equipment). This sensor type produces fewer nuisance alarms than ionisation types and is the preferred choice for living rooms, bedrooms, hallways, and landings.
The tamper-proof, sealed-for-life lithium battery powers the alarm for the entire 10-year service life, assisted by a low-power standby chip. There are no battery changes required, and the alarm signals end of life with a distinct tone. The tamper-proof design also satisfies landlord compliance requirements under current UK legislation.
The R200S-N1 automatically self-tests its sensor and electronics periodically, without user action. Any identified fault is clearly indicated by a distinguishable audible fault tone separate from the alarm tone. Fault tones can be silenced for up to 9 hours while investigating and resolving the issue, reducing nuisance noise.
A high-output 85 dB sounder ensures the alarm signal is audible throughout the property. The 10-minute hush function — activated by pressing anywhere on the front face — silences the sounder without disabling detection, allowing time for non-hazardous smoke to disperse. Detection continues throughout the hush period.
The ultra-slim body sits close to the ceiling surface, minimising visual impact. The large front face also serves as the test/silence button, making routine weekly testing straightforward. Compatible with the full Honeywell Home R200 range for a unified, consistent appearance throughout the property when mixing alarm types.
| Model | R200S-N1 |
| Alarm Type | Interconnected Optical Smoke Alarm |
| Sensor Technology | Optical (photoelectric) smoke sensor |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect Technology | Radio Frequency (RF) wireless interlink |
| Max Interconnected Alarms | 12 (this unit + 11 others) |
| Compatible Alarm Types | R200 series smoke, heat, and CO alarms |
| Hush Duration | Up to 10 minutes |
| Fault Silence Duration | Up to 9 hours |
| Self-Test | Automatic periodic self-test (sensor & electronics) |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, EN 14604:2005+AC:2008, VdS, NF, SBSC, Q Label, B-Mark |
| Suitable System Grade | BS 5839-6 Grade F1 |
| Legislation Compliance | 2022 England, Scotland & Wales fire alarm home legislation |
| Mounting | Ceiling or wall mount; bayonet bracket |
| Colour | White |
What is the difference between the R200S-1 and the R200S-N1?
Can I mix R200S-N1 smoke alarms with R200H-N1 heat alarms and R200C-N1 CO alarms in one system?
How do I interconnect multiple R200S-N1 alarms?
Does this alarm meet the Scottish Government's fire alarm requirements?
Is the R200S-N1 suitable for landlords and rental properties?
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Honeywell Home R200S-N1 is a radio-interlinked optical smoke alarm combining a sealed 10-year lithium battery with a built-in RF wireless interlink module — the key upgrade over the stand-alone R200S-1. Once paired with other compatible Honeywell Home R200 series alarms, a hazard detected by any single unit triggers all connected alarms simultaneously, creating a fully synchronised warning system across your entire property without a single cable. With coverage for up to 12 alarms in one network (including smoke, heat, and CO models), the R200S-N1 is the foundation of a compliant BS 5839-6 Grade F1 interlinked fire and CO system. It meets the 2022 England, Scotland, and Wales fire alarm legislation for homes and carries BSI Kitemark certification to EN 14604:2005.
The built-in RF radio interlink module connects wirelessly with up to 11 additional compatible Honeywell Home R200 series alarms — mix smoke, heat, and CO units freely. When any alarm in the network triggers, all connected alarms sound simultaneously, ensuring occupants on every floor and in every room receive the warning immediately.
The optical (photoelectric) sensor detects the large smoke particles produced by slow-smouldering fires — the most common type in domestic settings (burning upholstery, overheating electrical equipment). This sensor type produces fewer nuisance alarms than ionisation types and is the preferred choice for living rooms, bedrooms, hallways, and landings.
The tamper-proof, sealed-for-life lithium battery powers the alarm for the entire 10-year service life, assisted by a low-power standby chip. There are no battery changes required, and the alarm signals end of life with a distinct tone. The tamper-proof design also satisfies landlord compliance requirements under current UK legislation.
The R200S-N1 automatically self-tests its sensor and electronics periodically, without user action. Any identified fault is clearly indicated by a distinguishable audible fault tone separate from the alarm tone. Fault tones can be silenced for up to 9 hours while investigating and resolving the issue, reducing nuisance noise.
A high-output 85 dB sounder ensures the alarm signal is audible throughout the property. The 10-minute hush function — activated by pressing anywhere on the front face — silences the sounder without disabling detection, allowing time for non-hazardous smoke to disperse. Detection continues throughout the hush period.
The ultra-slim body sits close to the ceiling surface, minimising visual impact. The large front face also serves as the test/silence button, making routine weekly testing straightforward. Compatible with the full Honeywell Home R200 range for a unified, consistent appearance throughout the property when mixing alarm types.
| Model | R200S-N1 |
| Alarm Type | Interconnected Optical Smoke Alarm |
| Sensor Technology | Optical (photoelectric) smoke sensor |
| Power Source | Sealed 10-year lithium battery (non-replaceable) |
| Alarm Sound Level | 85 dB minimum |
| Interconnect Technology | Radio Frequency (RF) wireless interlink |
| Max Interconnected Alarms | 12 (this unit + 11 others) |
| Compatible Alarm Types | R200 series smoke, heat, and CO alarms |
| Hush Duration | Up to 10 minutes |
| Fault Silence Duration | Up to 9 hours |
| Self-Test | Automatic periodic self-test (sensor & electronics) |
| Warranty | 10 years (manufacturer) |
| Certifications / Standards | CE, UKCA, BSI Kitemark, EN 14604:2005+AC:2008, VdS, NF, SBSC, Q Label, B-Mark |
| Suitable System Grade | BS 5839-6 Grade F1 |
| Legislation Compliance | 2022 England, Scotland & Wales fire alarm home legislation |
| Mounting | Ceiling or wall mount; bayonet bracket |
| Colour | White |
