Name: Solis 3.0kW 230V 5G Hybrid Inverter - 1 Phase with DC (for LV Batteries)
Brand: AIZO Quality Heating
SKU: solis-5g-3-0kw-230v-hybrid-inverter-1-phase-with-dc-for-lv-batteries
Availability: InStock

✨ New Arrivals Just Dropped!Explore

Home Store

Solis 3.0kW 230V 5G Hybrid Inverter - 1 Phase with DC (for LV Batteries)

The Solis 3kW Hybrid 5G Inverter (S5-EH1P3K-L / RHI-3K-48ES-5G) is the smallest single-phase model in the Solis RHI-5G hybrid range, delivering 3,000W AC output with a 3kW backup port that switches in under 20 ms during a power cut. At 3kW, it is the only model in the RHI-5G series with an output below the G98 threshold of 3.68kW: no prior DNO approval required, simply notify within 28 days of connection. This makes it the fastest to deploy of all four models in the range. Two independent 600V DC MPPT trackers, fanless passive cooling, IP65, 7-inch colour LCD, integrated DC switch. 48V lithium battery compatible (Pylontech, Dyness, BYD and others). Recommended max. PV power: 4.8kW. SolisCloud WiFi monitoring, OTA firmware. Certified: IEC/EN 62109-1/-2, BS EN 62109-1/-2 (UK), EN 50549-1, CE, UKCA, TÜV SÜD.

3kW

Rated output

3kW backup

Backup port

2 MPPT

600V DC

>97.1%

Peak efficiency

G98

DNO notify 28 days

IP65 Fanless

Build quality

⚠ Qualified installer required: Installation must be performed by a qualified and MCS-accredited electrician. All wiring must comply with BS 7671 and DNO G98/G99 notification requirements. A DC breaker rated >125 A must be installed between inverter and battery.

ℹ G98 — the smallest Solis hybrid: no prior DNO approval required: At 3.0kW AC output, this is the only model in the RHI-5G range with a grid output strictly below the 3.68kW G98 threshold. The installer notifies the DNO within 28 days after connection. No prior application or waiting period required. Ideal where a 3.6kW or 5kW inverter cannot be justified or where a small, budget-optimised system is the priority.

⚠ Not suitable for lead-acid or lead-carbon batteries: The S5-EH1P / RHI-5G series is designed for 48V lithium-ion (LFP) batteries only. Lead-acid and lead-carbon batteries are not covered under warranty. Confirmed compatible: Pylontech US2000C/US3000C/US5000, Dyness DL5.0C/DL5.0C Pro, BYD B-BOX Premium LVL.

ℹ Eastron SDM630 meter included: Solis supply a 3-phase Eastron SDM630 meter in the box. Despite the three-phase wiring diagram in the manual, Solis confirm this meter can be used in single-phase installations. Use the separate single-phase wiring guide supplement.

How the 3kW Fits in the Solis RHI-5G Hybrid Range

Model	Rated output	Backup port	Battery max	DNO	Best for
★ 3kW (this)	3,000W	3,000W	62.5A	G98	Smallest systems; budget-first; fastest install
3.6kW	3,600W	3,000W	100A	G98	Most domestic rooftops; best value
5kW	5,000W	5,000W	100A	G99	Larger homes; full 5kW backup
6kW	6,000W	5,000W	100A	G99	Maximum PV; high consumption

Note: the 3kW uses the same RHI-5G hardware platform but has a lower max battery current (62.5A) and lower recommended PV input (4.8kW) than the 3.6kW–6kW models. For most domestic new-build systems, the 3.6kW is generally a better specification match at a small price premium. The 3kW suits particularly constrained array sizes or budget-limited systems requiring the G98 simplicity.

Key Features

3kW Output with G98 Simplicity — Notify, Don’t Apply

The 3kW rated output is below the G98 threshold of 3.68kW, making this the only model in the Solis RHI-5G range that does not require G99 prior approval. The installer connects the inverter and submits a G98 notification to the DNO within 28 days. This eliminates the 6 – 12-week wait associated with G99, which is mandatory for the 3.6kW, 5kW and 6kW models. For properties where the electrical installation is otherwise ready and the installer wants to commission immediately, the 3kW is the only choice in this range.

G98 — no prior approvalNotify within 28 days

3kW Backup Port — Less Than 20 ms Switching

The inverter has a dedicated backup port that switches in under 20 ms on grid loss — transparent to most electronics. The backup port is separate from the grid output; it should feed a sub-consumer unit with critical loads only (fridge, lighting, router, phone charging). The backup port must never be connected to the grid. At 3kW, the backup port matches the grid output rating exactly: the entire inverter output is available for backup without any power reduction.

Backup <20ms3kW backup = 3kW grid outputMust NOT connect to grid

97.1% Efficiency — Fanless Passive Cooling, IP65

The S5-EH1P3K-L achieves >97.1% peak conversion efficiency with a transformerless (non-isolated) topology. No fan means no fan noise, no fan failure mode, and no moving parts. The front heatsink dissipates heat passively. IP65 rating means the enclosure is fully sealed against dust and water jets from any direction: suitable for garage, utility room, or sheltered external wall installation.

>97.1% efficiencyFanlessIP65

Dual MPPT, 600V DC — 4.8kW Recommended PV Input

Two independent MPPT trackers allow panels on two string orientations to be optimised separately. Max 600V DC input, MPPT operating range 90 – 520V. Recommended max PV power is 4.8kW DC (slightly lower than the 3.6kW model’s implied 6kW oversizing). MC4 connectors; PV wire 2.5 – 4 mm².

2 MPPT600V DC max4.8kW rec. PV

48V LFP Battery — CAN/RS485 BMS

42 – 58V DC battery connection with CAN/RS485 BMS communication. Max charge/discharge current 62.5A (lower than the 3.6kW–6kW models’ 100A). At 51.2V, 62.5A = approximately 3.2kW of battery throughput — matching the inverter’s 3kW rated output. Compatible: Pylontech US2000C/US3000C/US5000, Dyness DL5.0C, BYD B-BOX and others.

48V LFPCAN/RS48562.5A max charge/discharge

Three Operating Modes + SolisCloud WiFi

Self-consumption: PV powers loads, surplus charges battery, battery discharges at night. Timed charge/discharge: charge from cheap overnight tariff (Octopus Go/Agile), discharge during peak rate. Backup: battery reserved for power cuts. WiFi monitoring via SolisCloud for real-time data and OTA firmware. 7-inch colour LCD for on-unit configuration without phone/internet.

Self-consumptionTimed TOUBackupSolisCloud WiFi

Technical Specifications

Solar PV Input (2 MPPT)
Recommended max. PV power	4.8 kW DC
Max input voltage	600 V DC
MPPT voltage range	90 – 520 V DC
Max input current (per MPPT)	2 × 15A (S5-EH1P) / 2 × 11A (RHI-5G)
PV connectors	MC4 · cable 2.5 – 4 mm²
AC Output (Grid Side)
Rated output power	3,000 W
Max apparent output power	3,300 VA
Max output current	14.5 A (S5-EH1P) / 15.7 A (RHI-5G)
Output voltage / frequency	230 V AC / 50 Hz
AC Backup Port
Backup rated power	3,000 W
Backup output current	13 A
Backup switching time	<20 ms
Battery
Battery type	Li-ion — not suitable for lead-acid
Battery voltage range	42 – 58 V DC (48V class)
Max charge / discharge current	62.5 A DC each
BMS communication	CAN / RS485
DC breaker required	>125 A between inverter and battery
General
Phase	Single-phase 1/N/PE
Efficiency	>97.1 % peak
Cooling	Fanless passive (heatsink)
IP rating	IP65
Operating temperature	−25°C to +60°C
Weight	18.3 kg (approx.)
Display	7-inch colour LCD
Operating modes	Self-consumption, Timed charge/discharge, Backup
Monitoring	SolisCloud (WiFi) — OTA firmware updates
Integrated DC switch	Yes
Standards and Approvals
Safety	IEC/EN 62109-1 & -2, BS EN 62109-1 & -2 (UK)
Grid	EN 50549-1, G98, IEC 61727, IEC 62116
Approvals	CE, UKCA, TÜV SÜD

Frequently Asked Questions

Why choose 3kW over the 3.6kW model?

The 3kW model makes sense in two specific situations. First, if you want absolute simplicity for DNO compliance: both are G98, but the 3kW’s output is meaningfully further below the 3.68kW threshold. Second, if your solar array is small (2 – 3 panels, 1 – 1.5kW) and you only want a modest battery, the 3kW inverter’s lower max charge/discharge current (62.5A vs 100A on the 3.6kW) is a better match. For most new domestic installations, however, the 3.6kW delivers better long-term flexibility at a modest premium and is the more commonly specified choice.

Does this inverter require G98 or G99?

G98. At 3kW rated AC output, this inverter is below the G98 threshold of 3.68kW. The installer connects the inverter and notifies the DNO within 28 days. No prior approval or application is required. This applies for a single inverter on a domestic single-phase supply. Always confirm with the DNO if in doubt, particularly for non-standard installations.

Can I add batteries later if I start with just solar?

Yes. The inverter can operate without a battery — it will function as a standard on-grid inverter. When you are ready to add storage, connect the 48V battery bank to the battery DC terminals and configure the battery type and parameters via the LCD menu or SolisCloud. The inverter will automatically begin managing battery charge and discharge. Ensure the battery brand is on the Solis compatibility list before purchase.

What happens to my loads when the grid fails?

Within 20 ms (typically 10 ms), the inverter switches the backup port load from the grid connection to the battery/PV supply. Any loads connected to the backup port sub-consumer unit will continue operating without interruption. Loads connected to the main consumer unit (non-backup side) will lose power in the normal way. This is why critical loads (fridge, broadband router, phone charging, CCTV) should be on a dedicated backup consumer unit wired to the inverter’s backup port.

Is the Eastron SDM630 meter in the box suitable for a single-phase installation?

Yes. Solis supply a three-phase Eastron SDM630 meter in the box. Despite the main manual showing three-phase wiring diagrams, Solis have confirmed the SDM630 can be used in single-phase installations. Use the dedicated single-phase wiring guide supplement (available on the Solis service portal) — do not follow the meter wiring in the main manual for single-phase.

More Images