✨ New Arrivals Just Dropped!Explore
Mixergy 180L R290 iHP Integrated Heat Pump Cylinder
The Mixergy 180 Litre R290 iHP Integrated Heat Pump Cylinder is a smart unvented hot water cylinder with a built‑in R290 air‑to‑water heat pump, designed to deliver highly efficient, low‑carbon hot water for all‑electric homes.
Product Description
Part of the Mixergy iHP X R290 range, the 180L model combines a Duplex stainless steel cylinder with a factory‑fitted, top‑mounted R290 heat pump head. Using patented top‑down stratified heating, it delivers usable hot water in under 30 minutes while using around three times less electricity than a conventional direct electric cylinder. The system connects to the Mixergy app for machine‑learning schedules, time‑of‑use tariff optimisation and live hot water level indication.
Key Features
- Integrated R290 heat pump: Compact indoor air‑to‑water heat pump built into the cylinder head – no separate outdoor unit required.
- High efficiency: Approximate CoP of 3.4 and ErP A+ rating, significantly reducing running costs vs direct‑only cylinders.
- Fast hot water: Top‑down heating provides usable hot water in under 30 minutes, up to 10× faster than conventional integrated HP cylinders.
- Smart control: Mixergy app with machine learning, smart scheduling, Boost, usage insights and support for time‑of‑use tariffs.
- Medium‑size capacity: 180L volume suited to typical family homes and all‑electric properties.
- Engineered to last: 25‑year cylinder warranty and 5‑year heat pump head warranty (typical Mixergy terms and conditions).
- Modular design: Cylinder and heat pump head supplied as separate pieces for easier handling and installation.
Technical Specifications
- Model: MX-180-IH2-579 – 180L Integrated HP R290 Smart Cylinder.
- Nominal capacity: 180 litres.
- Cylinder material: Duplex stainless steel.
- Refrigerant: R290 (propane), typical charge ~150 g.
- Heat pump electric rating: 0.55 kW.
- Heat pump max. power output: 1.5 kW.
- Coefficient of performance (CoP): 3.4 (datasheet value).
- Achievable hot water temperature (heat pump only): Up to 59°C.
- Back‑up immersion heater: 2 kW 1¾″ BSP (3 kW immersion shown on some reseller specs; minimum 2 kW from Mixergy datasheet).
- Standing heat loss: 0.54–1.34 kWh/24 h (iHP X R290 180L range).
- ErP rating: A+.
- Electrical supply: 13 A, 230–240 V~ single phase.
- Air operating range: −7°C to +35°C ambient air.
- Sound power level: Around 50 dB.
- Airflow: Approx. 500 m³/h via ducting.
- Air duct diameter: 150 mm (intake and exhaust).
- Water connections: 22 mm compression.
Dimensions & Weights
- Height: 1695 mm.
- Diameter: 580 mm.
- Weight (empty): 90 kg.
- Weight (full): 270 kg.
- Minimum reheat time (15–50°C, partial/top‑down): 30 minutes.
- 70% charge reheat (15–50°C): Approx. 140 minutes.
- 100% charge reheat (15–50°C): Approx. 201 minutes.
Included Components
- Unvented kit: pressure reducing valve, check valve, pressure & temperature relief valve, expansion relief valve, tundish and expansion vessel (including mounting bracket and 3/4″ × 22 mm adapters).
- Back‑up immersion heater (min. 2 kW, 1¾″ BSP, factory‑fitted).
- Integrated R290 heat pump head unit.
- Powerline‑to‑Ethernet adapter and Ethernet cable.
- Control gauge and onboard electronics.
- User Guide and iHP X installation/servicing instructions.
Applications & Notes
- Ideal for medium‑sized all‑electric homes and apartments where external heat pumps are impractical or undesired.
- Suitable for both retrofit and new‑build projects, installing similarly to a standard unvented cylinder with additional external wall ducting for the heat pump air path.
- Optimised for smart tariffs and eco‑operation via the Mixergy app’s ML‑driven scheduling and energy insights.
- Must be installed and commissioned by a G3‑qualified installer in accordance with Mixergy’s iHP X installation manual and local building regulations.
$1,672.71
Original: $4,779.18
-65%Mixergy 180L R290 iHP Integrated Heat Pump Cylinder—
$4,779.18
$1,672.71More Images
Mixergy 180L R290 iHP Integrated Heat Pump Cylinder
The Mixergy 180 Litre R290 iHP Integrated Heat Pump Cylinder is a smart unvented hot water cylinder with a built‑in R290 air‑to‑water heat pump, designed to deliver highly efficient, low‑carbon hot water for all‑electric homes.
Product Description
Part of the Mixergy iHP X R290 range, the 180L model combines a Duplex stainless steel cylinder with a factory‑fitted, top‑mounted R290 heat pump head. Using patented top‑down stratified heating, it delivers usable hot water in under 30 minutes while using around three times less electricity than a conventional direct electric cylinder. The system connects to the Mixergy app for machine‑learning schedules, time‑of‑use tariff optimisation and live hot water level indication.
Key Features
- Integrated R290 heat pump: Compact indoor air‑to‑water heat pump built into the cylinder head – no separate outdoor unit required.
- High efficiency: Approximate CoP of 3.4 and ErP A+ rating, significantly reducing running costs vs direct‑only cylinders.
- Fast hot water: Top‑down heating provides usable hot water in under 30 minutes, up to 10× faster than conventional integrated HP cylinders.
- Smart control: Mixergy app with machine learning, smart scheduling, Boost, usage insights and support for time‑of‑use tariffs.
- Medium‑size capacity: 180L volume suited to typical family homes and all‑electric properties.
- Engineered to last: 25‑year cylinder warranty and 5‑year heat pump head warranty (typical Mixergy terms and conditions).
- Modular design: Cylinder and heat pump head supplied as separate pieces for easier handling and installation.
Technical Specifications
- Model: MX-180-IH2-579 – 180L Integrated HP R290 Smart Cylinder.
- Nominal capacity: 180 litres.
- Cylinder material: Duplex stainless steel.
- Refrigerant: R290 (propane), typical charge ~150 g.
- Heat pump electric rating: 0.55 kW.
- Heat pump max. power output: 1.5 kW.
- Coefficient of performance (CoP): 3.4 (datasheet value).
- Achievable hot water temperature (heat pump only): Up to 59°C.
- Back‑up immersion heater: 2 kW 1¾″ BSP (3 kW immersion shown on some reseller specs; minimum 2 kW from Mixergy datasheet).
- Standing heat loss: 0.54–1.34 kWh/24 h (iHP X R290 180L range).
- ErP rating: A+.
- Electrical supply: 13 A, 230–240 V~ single phase.
- Air operating range: −7°C to +35°C ambient air.
- Sound power level: Around 50 dB.
- Airflow: Approx. 500 m³/h via ducting.
- Air duct diameter: 150 mm (intake and exhaust).
- Water connections: 22 mm compression.
Dimensions & Weights
- Height: 1695 mm.
- Diameter: 580 mm.
- Weight (empty): 90 kg.
- Weight (full): 270 kg.
- Minimum reheat time (15–50°C, partial/top‑down): 30 minutes.
- 70% charge reheat (15–50°C): Approx. 140 minutes.
- 100% charge reheat (15–50°C): Approx. 201 minutes.
Included Components
- Unvented kit: pressure reducing valve, check valve, pressure & temperature relief valve, expansion relief valve, tundish and expansion vessel (including mounting bracket and 3/4″ × 22 mm adapters).
- Back‑up immersion heater (min. 2 kW, 1¾″ BSP, factory‑fitted).
- Integrated R290 heat pump head unit.
- Powerline‑to‑Ethernet adapter and Ethernet cable.
- Control gauge and onboard electronics.
- User Guide and iHP X installation/servicing instructions.
Applications & Notes
- Ideal for medium‑sized all‑electric homes and apartments where external heat pumps are impractical or undesired.
- Suitable for both retrofit and new‑build projects, installing similarly to a standard unvented cylinder with additional external wall ducting for the heat pump air path.
- Optimised for smart tariffs and eco‑operation via the Mixergy app’s ML‑driven scheduling and energy insights.
- Must be installed and commissioned by a G3‑qualified installer in accordance with Mixergy’s iHP X installation manual and local building regulations.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Mixergy 180 Litre R290 iHP Integrated Heat Pump Cylinder is a smart unvented hot water cylinder with a built‑in R290 air‑to‑water heat pump, designed to deliver highly efficient, low‑carbon hot water for all‑electric homes.
Product Description
Part of the Mixergy iHP X R290 range, the 180L model combines a Duplex stainless steel cylinder with a factory‑fitted, top‑mounted R290 heat pump head. Using patented top‑down stratified heating, it delivers usable hot water in under 30 minutes while using around three times less electricity than a conventional direct electric cylinder. The system connects to the Mixergy app for machine‑learning schedules, time‑of‑use tariff optimisation and live hot water level indication.
Key Features
- Integrated R290 heat pump: Compact indoor air‑to‑water heat pump built into the cylinder head – no separate outdoor unit required.
- High efficiency: Approximate CoP of 3.4 and ErP A+ rating, significantly reducing running costs vs direct‑only cylinders.
- Fast hot water: Top‑down heating provides usable hot water in under 30 minutes, up to 10× faster than conventional integrated HP cylinders.
- Smart control: Mixergy app with machine learning, smart scheduling, Boost, usage insights and support for time‑of‑use tariffs.
- Medium‑size capacity: 180L volume suited to typical family homes and all‑electric properties.
- Engineered to last: 25‑year cylinder warranty and 5‑year heat pump head warranty (typical Mixergy terms and conditions).
- Modular design: Cylinder and heat pump head supplied as separate pieces for easier handling and installation.
Technical Specifications
- Model: MX-180-IH2-579 – 180L Integrated HP R290 Smart Cylinder.
- Nominal capacity: 180 litres.
- Cylinder material: Duplex stainless steel.
- Refrigerant: R290 (propane), typical charge ~150 g.
- Heat pump electric rating: 0.55 kW.
- Heat pump max. power output: 1.5 kW.
- Coefficient of performance (CoP): 3.4 (datasheet value).
- Achievable hot water temperature (heat pump only): Up to 59°C.
- Back‑up immersion heater: 2 kW 1¾″ BSP (3 kW immersion shown on some reseller specs; minimum 2 kW from Mixergy datasheet).
- Standing heat loss: 0.54–1.34 kWh/24 h (iHP X R290 180L range).
- ErP rating: A+.
- Electrical supply: 13 A, 230–240 V~ single phase.
- Air operating range: −7°C to +35°C ambient air.
- Sound power level: Around 50 dB.
- Airflow: Approx. 500 m³/h via ducting.
- Air duct diameter: 150 mm (intake and exhaust).
- Water connections: 22 mm compression.
Dimensions & Weights
- Height: 1695 mm.
- Diameter: 580 mm.
- Weight (empty): 90 kg.
- Weight (full): 270 kg.
- Minimum reheat time (15–50°C, partial/top‑down): 30 minutes.
- 70% charge reheat (15–50°C): Approx. 140 minutes.
- 100% charge reheat (15–50°C): Approx. 201 minutes.
Included Components
- Unvented kit: pressure reducing valve, check valve, pressure & temperature relief valve, expansion relief valve, tundish and expansion vessel (including mounting bracket and 3/4″ × 22 mm adapters).
- Back‑up immersion heater (min. 2 kW, 1¾″ BSP, factory‑fitted).
- Integrated R290 heat pump head unit.
- Powerline‑to‑Ethernet adapter and Ethernet cable.
- Control gauge and onboard electronics.
- User Guide and iHP X installation/servicing instructions.
Applications & Notes
- Ideal for medium‑sized all‑electric homes and apartments where external heat pumps are impractical or undesired.
- Suitable for both retrofit and new‑build projects, installing similarly to a standard unvented cylinder with additional external wall ducting for the heat pump air path.
- Optimised for smart tariffs and eco‑operation via the Mixergy app’s ML‑driven scheduling and energy insights.
- Must be installed and commissioned by a G3‑qualified installer in accordance with Mixergy’s iHP X installation manual and local building regulations.
