✨ New Arrivals Just Dropped!Explore
Victron Quattro 48/10000/140-100/100 230V VE.Bus Inverter/Charger
The Victron Quattro 48/10000/140-100/100 is a 10kVA 48V pure sine wave inverter/charger that combines a powerful inverter, intelligent battery charger and ultra-fast automatic transfer switch in one compact unit for advanced off‑grid and backup power systems.
Designed for demanding residential and professional installations, it accepts two independent AC inputs (for example grid and generator), offers dual AC outputs, and supports parallel and three‑phase configurations to deliver highly reliable, scalable power.
Key Features
- High power 10kVA inverter – 48V pure sine wave inverter with up to 10,000VA / 8,000W continuous output (at 25°C) and 20,000W peak power for starting heavy loads such as pumps, compressors and large appliances.
- Integrated 140A smart charger – High‑performance 48V battery charger delivering up to 140A charge current, optimised for modern battery banks to improve charging efficiency and battery life.
- Dual AC inputs with transfer switch – Built‑in 2 x 100A transfer switches allow connection to two AC sources (for example grid and generator) with automatic selection of the active source for seamless power.
- Two AC outputs – Primary output offers no‑break functionality for critical loads, while the secondary output only energises when AC input is available, ideal for non‑essential or high‑demand appliances.
- PowerControl – Limits AC input current to prevent overloading small generators or restricted grid connections, automatically managing battery charging and load support.
- PowerAssist – Boosts limited shore or generator power by adding inverter power from the battery, helping avoid nuisance tripping when running larger loads.
- Parallel and three‑phase capability – Multiple Quattros can be paralleled and configured for three‑phase or split‑phase systems, enabling very high total power and charging capacity.
- Seamless backup and off‑grid operation – Transfers to inverter power in under 20ms (typical), keeping sensitive electronics and home or business systems running during grid failures.
- Solar‑ready integration – Works alongside grid‑tie PV or off‑grid solar charge controllers to create flexible energy storage and self‑consumption systems.
- Advanced monitoring and control – VE.Bus communication supports system expansion, remote monitoring and integration with Victron GX devices for detailed performance insight.
- Robust industrial design – Heavy‑duty build with high efficiency (up to 96%), wide operating temperature range and comprehensive electronic protections for long‑term reliability.
Why Buy This Inverter/Charger
- All‑in‑one power solution – Replaces separate inverter, charger and transfer switch, simplifying design and installation while reducing space and wiring complexity.
- Protects your comfort and operations – Maintains power to essential circuits during outages, keeping lighting, IT equipment, refrigeration and key systems running without interruption.
- Maximises use of solar and stored energy – Works with batteries and PV to cut grid consumption, stabilise loads and improve energy independence for homes and commercial sites.
- Ideal for limited or variable AC supply – PowerControl and PowerAssist ensure reliable operation even with small generators or weak grid connections, reducing the risk of overloads and downtime.
- Scalable for future expansion – Parallel and three‑phase options mean the system can grow with your property, business or project requirements over time.
- Backed by Victron quality – Designed by a trusted global brand in off‑grid and backup power, with proven performance in residential, marine, mobile and industrial applications.
Suitable For
- Home backup and energy storage – Whole‑home or partial backup systems using batteries and solar to protect against power cuts and reduce reliance on the grid.[1]
- Off‑grid homes and cabins – Remote properties requiring dependable 230V AC power from batteries, generators and renewables.
- Commercial and light industrial sites – Workshops, farms, telecoms sites and small businesses needing robust backup, load management and integration with PV.
- Marine and mobile applications – Larger boats, specialist vehicles and mobile units where dual AC sources, high surge capacity and continuous power are essential.
- Generator‑supported systems – Installations that cycle between grid, generator and battery power, requiring automatic source selection and intelligent current limiting.
Technical Specifications
| General | |
|---|---|
| Product type | Inverter/Charger – Victron Quattro 48/10000/140-100/100 230V VE.Bus |
| Nominal AC output voltage | 230V AC ± 2% (50Hz, adjustable to 60Hz) |
| Nominal battery voltage | 48V DC |
| Continuous output power at 25°C | 10,000VA / 8,000W |
| Continuous output power at 40°C | 6,500W (approximate, per Quattro 48/10000 datasheet class) |
| Peak power | 20,000W |
| Maximum efficiency | Up to 96% |
| Inverter | |
| Input voltage range | Approx. 38 – 66V DC (48V model class) |
| Output waveform | Pure sine wave |
| No‑load power consumption | Typical low standby consumption with AES/Search modes for improved efficiency (Quattro 10kVA family) |
| Battery Charger | |
| Maximum charge current | 140A @ 48V |
| Charge algorithm | Adaptive multi‑stage charging with adjustable absorption and float settings (family spec) |
| Battery temperature sensor | Yes, supplied for temperature‑compensated charging |
| AC Inputs & Outputs | |
| AC inputs | 2 x AC inputs (for example grid and generator) with automatic transfer |
| Maximum feed‑through current | 2 x 100A |
| AC outputs | 2 x AC outputs: main output with no‑break functionality; secondary output only active when AC input is present |
| PowerControl / PowerAssist | Yes – programmable current limit and generator/grid assist modes |
| Parallel / three‑phase | Supports parallel and three‑phase configurations with multiple Quattro units |
| Physical | |
| Dimensions (H x W x D) | Approx. 470 x 350 x 280mm (Quattro 48/10000 range) |
| Weight | Approx. 51kg (Quattro 10kVA class) |
| Enclosure material / colour | Aluminium, blue (Victron RAL 5012) |
| Ingress protection | IP21 (typical for Quattro inverter/charger family) |
| Environmental | |
| Operating temperature | Approx. -40°C to +65°C (derating above 40°C) |
| Humidity (non‑condensing) | Up to 95% RH (non‑condensing) |
| Maximum altitude | Up to 3,500m (typical Quattro datasheet rating) |
| Connectivity & Control | |
| VE.Bus ports | Yes – for parallel/three‑phase operation, remote monitoring and system integration |
| Programmable relay | Multiple programmable relays for alarms and generator start/stop (family spec) |
| Remote on/off | Yes – remote control capability for system integration |
| Compliance & Warranty | |
| Safety standards | Designed to comply with EN‑IEC safety standards for inverters and chargers (Quattro series) |
| EMC standards | Meets relevant EN‑IEC emission and immunity standards (family spec) |
| Warranty | Victron multi‑year limited warranty (duration subject to regional Victron policy) |
$1,278.75
Original: $3,653.56
-65%Victron Quattro 48/10000/140-100/100 230V VE.Bus Inverter/Charger—
$3,653.56
$1,278.75Victron Quattro 48/10000/140-100/100 230V VE.Bus Inverter/Charger
The Victron Quattro 48/10000/140-100/100 is a 10kVA 48V pure sine wave inverter/charger that combines a powerful inverter, intelligent battery charger and ultra-fast automatic transfer switch in one compact unit for advanced off‑grid and backup power systems.
Designed for demanding residential and professional installations, it accepts two independent AC inputs (for example grid and generator), offers dual AC outputs, and supports parallel and three‑phase configurations to deliver highly reliable, scalable power.
Key Features
- High power 10kVA inverter – 48V pure sine wave inverter with up to 10,000VA / 8,000W continuous output (at 25°C) and 20,000W peak power for starting heavy loads such as pumps, compressors and large appliances.
- Integrated 140A smart charger – High‑performance 48V battery charger delivering up to 140A charge current, optimised for modern battery banks to improve charging efficiency and battery life.
- Dual AC inputs with transfer switch – Built‑in 2 x 100A transfer switches allow connection to two AC sources (for example grid and generator) with automatic selection of the active source for seamless power.
- Two AC outputs – Primary output offers no‑break functionality for critical loads, while the secondary output only energises when AC input is available, ideal for non‑essential or high‑demand appliances.
- PowerControl – Limits AC input current to prevent overloading small generators or restricted grid connections, automatically managing battery charging and load support.
- PowerAssist – Boosts limited shore or generator power by adding inverter power from the battery, helping avoid nuisance tripping when running larger loads.
- Parallel and three‑phase capability – Multiple Quattros can be paralleled and configured for three‑phase or split‑phase systems, enabling very high total power and charging capacity.
- Seamless backup and off‑grid operation – Transfers to inverter power in under 20ms (typical), keeping sensitive electronics and home or business systems running during grid failures.
- Solar‑ready integration – Works alongside grid‑tie PV or off‑grid solar charge controllers to create flexible energy storage and self‑consumption systems.
- Advanced monitoring and control – VE.Bus communication supports system expansion, remote monitoring and integration with Victron GX devices for detailed performance insight.
- Robust industrial design – Heavy‑duty build with high efficiency (up to 96%), wide operating temperature range and comprehensive electronic protections for long‑term reliability.
Why Buy This Inverter/Charger
- All‑in‑one power solution – Replaces separate inverter, charger and transfer switch, simplifying design and installation while reducing space and wiring complexity.
- Protects your comfort and operations – Maintains power to essential circuits during outages, keeping lighting, IT equipment, refrigeration and key systems running without interruption.
- Maximises use of solar and stored energy – Works with batteries and PV to cut grid consumption, stabilise loads and improve energy independence for homes and commercial sites.
- Ideal for limited or variable AC supply – PowerControl and PowerAssist ensure reliable operation even with small generators or weak grid connections, reducing the risk of overloads and downtime.
- Scalable for future expansion – Parallel and three‑phase options mean the system can grow with your property, business or project requirements over time.
- Backed by Victron quality – Designed by a trusted global brand in off‑grid and backup power, with proven performance in residential, marine, mobile and industrial applications.
Suitable For
- Home backup and energy storage – Whole‑home or partial backup systems using batteries and solar to protect against power cuts and reduce reliance on the grid.[1]
- Off‑grid homes and cabins – Remote properties requiring dependable 230V AC power from batteries, generators and renewables.
- Commercial and light industrial sites – Workshops, farms, telecoms sites and small businesses needing robust backup, load management and integration with PV.
- Marine and mobile applications – Larger boats, specialist vehicles and mobile units where dual AC sources, high surge capacity and continuous power are essential.
- Generator‑supported systems – Installations that cycle between grid, generator and battery power, requiring automatic source selection and intelligent current limiting.
Technical Specifications
| General | |
|---|---|
| Product type | Inverter/Charger – Victron Quattro 48/10000/140-100/100 230V VE.Bus |
| Nominal AC output voltage | 230V AC ± 2% (50Hz, adjustable to 60Hz) |
| Nominal battery voltage | 48V DC |
| Continuous output power at 25°C | 10,000VA / 8,000W |
| Continuous output power at 40°C | 6,500W (approximate, per Quattro 48/10000 datasheet class) |
| Peak power | 20,000W |
| Maximum efficiency | Up to 96% |
| Inverter | |
| Input voltage range | Approx. 38 – 66V DC (48V model class) |
| Output waveform | Pure sine wave |
| No‑load power consumption | Typical low standby consumption with AES/Search modes for improved efficiency (Quattro 10kVA family) |
| Battery Charger | |
| Maximum charge current | 140A @ 48V |
| Charge algorithm | Adaptive multi‑stage charging with adjustable absorption and float settings (family spec) |
| Battery temperature sensor | Yes, supplied for temperature‑compensated charging |
| AC Inputs & Outputs | |
| AC inputs | 2 x AC inputs (for example grid and generator) with automatic transfer |
| Maximum feed‑through current | 2 x 100A |
| AC outputs | 2 x AC outputs: main output with no‑break functionality; secondary output only active when AC input is present |
| PowerControl / PowerAssist | Yes – programmable current limit and generator/grid assist modes |
| Parallel / three‑phase | Supports parallel and three‑phase configurations with multiple Quattro units |
| Physical | |
| Dimensions (H x W x D) | Approx. 470 x 350 x 280mm (Quattro 48/10000 range) |
| Weight | Approx. 51kg (Quattro 10kVA class) |
| Enclosure material / colour | Aluminium, blue (Victron RAL 5012) |
| Ingress protection | IP21 (typical for Quattro inverter/charger family) |
| Environmental | |
| Operating temperature | Approx. -40°C to +65°C (derating above 40°C) |
| Humidity (non‑condensing) | Up to 95% RH (non‑condensing) |
| Maximum altitude | Up to 3,500m (typical Quattro datasheet rating) |
| Connectivity & Control | |
| VE.Bus ports | Yes – for parallel/three‑phase operation, remote monitoring and system integration |
| Programmable relay | Multiple programmable relays for alarms and generator start/stop (family spec) |
| Remote on/off | Yes – remote control capability for system integration |
| Compliance & Warranty | |
| Safety standards | Designed to comply with EN‑IEC safety standards for inverters and chargers (Quattro series) |
| EMC standards | Meets relevant EN‑IEC emission and immunity standards (family spec) |
| Warranty | Victron multi‑year limited warranty (duration subject to regional Victron policy) |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Victron Quattro 48/10000/140-100/100 is a 10kVA 48V pure sine wave inverter/charger that combines a powerful inverter, intelligent battery charger and ultra-fast automatic transfer switch in one compact unit for advanced off‑grid and backup power systems.
Designed for demanding residential and professional installations, it accepts two independent AC inputs (for example grid and generator), offers dual AC outputs, and supports parallel and three‑phase configurations to deliver highly reliable, scalable power.
Key Features
- High power 10kVA inverter – 48V pure sine wave inverter with up to 10,000VA / 8,000W continuous output (at 25°C) and 20,000W peak power for starting heavy loads such as pumps, compressors and large appliances.
- Integrated 140A smart charger – High‑performance 48V battery charger delivering up to 140A charge current, optimised for modern battery banks to improve charging efficiency and battery life.
- Dual AC inputs with transfer switch – Built‑in 2 x 100A transfer switches allow connection to two AC sources (for example grid and generator) with automatic selection of the active source for seamless power.
- Two AC outputs – Primary output offers no‑break functionality for critical loads, while the secondary output only energises when AC input is available, ideal for non‑essential or high‑demand appliances.
- PowerControl – Limits AC input current to prevent overloading small generators or restricted grid connections, automatically managing battery charging and load support.
- PowerAssist – Boosts limited shore or generator power by adding inverter power from the battery, helping avoid nuisance tripping when running larger loads.
- Parallel and three‑phase capability – Multiple Quattros can be paralleled and configured for three‑phase or split‑phase systems, enabling very high total power and charging capacity.
- Seamless backup and off‑grid operation – Transfers to inverter power in under 20ms (typical), keeping sensitive electronics and home or business systems running during grid failures.
- Solar‑ready integration – Works alongside grid‑tie PV or off‑grid solar charge controllers to create flexible energy storage and self‑consumption systems.
- Advanced monitoring and control – VE.Bus communication supports system expansion, remote monitoring and integration with Victron GX devices for detailed performance insight.
- Robust industrial design – Heavy‑duty build with high efficiency (up to 96%), wide operating temperature range and comprehensive electronic protections for long‑term reliability.
Why Buy This Inverter/Charger
- All‑in‑one power solution – Replaces separate inverter, charger and transfer switch, simplifying design and installation while reducing space and wiring complexity.
- Protects your comfort and operations – Maintains power to essential circuits during outages, keeping lighting, IT equipment, refrigeration and key systems running without interruption.
- Maximises use of solar and stored energy – Works with batteries and PV to cut grid consumption, stabilise loads and improve energy independence for homes and commercial sites.
- Ideal for limited or variable AC supply – PowerControl and PowerAssist ensure reliable operation even with small generators or weak grid connections, reducing the risk of overloads and downtime.
- Scalable for future expansion – Parallel and three‑phase options mean the system can grow with your property, business or project requirements over time.
- Backed by Victron quality – Designed by a trusted global brand in off‑grid and backup power, with proven performance in residential, marine, mobile and industrial applications.
Suitable For
- Home backup and energy storage – Whole‑home or partial backup systems using batteries and solar to protect against power cuts and reduce reliance on the grid.[1]
- Off‑grid homes and cabins – Remote properties requiring dependable 230V AC power from batteries, generators and renewables.
- Commercial and light industrial sites – Workshops, farms, telecoms sites and small businesses needing robust backup, load management and integration with PV.
- Marine and mobile applications – Larger boats, specialist vehicles and mobile units where dual AC sources, high surge capacity and continuous power are essential.
- Generator‑supported systems – Installations that cycle between grid, generator and battery power, requiring automatic source selection and intelligent current limiting.
Technical Specifications
| General | |
|---|---|
| Product type | Inverter/Charger – Victron Quattro 48/10000/140-100/100 230V VE.Bus |
| Nominal AC output voltage | 230V AC ± 2% (50Hz, adjustable to 60Hz) |
| Nominal battery voltage | 48V DC |
| Continuous output power at 25°C | 10,000VA / 8,000W |
| Continuous output power at 40°C | 6,500W (approximate, per Quattro 48/10000 datasheet class) |
| Peak power | 20,000W |
| Maximum efficiency | Up to 96% |
| Inverter | |
| Input voltage range | Approx. 38 – 66V DC (48V model class) |
| Output waveform | Pure sine wave |
| No‑load power consumption | Typical low standby consumption with AES/Search modes for improved efficiency (Quattro 10kVA family) |
| Battery Charger | |
| Maximum charge current | 140A @ 48V |
| Charge algorithm | Adaptive multi‑stage charging with adjustable absorption and float settings (family spec) |
| Battery temperature sensor | Yes, supplied for temperature‑compensated charging |
| AC Inputs & Outputs | |
| AC inputs | 2 x AC inputs (for example grid and generator) with automatic transfer |
| Maximum feed‑through current | 2 x 100A |
| AC outputs | 2 x AC outputs: main output with no‑break functionality; secondary output only active when AC input is present |
| PowerControl / PowerAssist | Yes – programmable current limit and generator/grid assist modes |
| Parallel / three‑phase | Supports parallel and three‑phase configurations with multiple Quattro units |
| Physical | |
| Dimensions (H x W x D) | Approx. 470 x 350 x 280mm (Quattro 48/10000 range) |
| Weight | Approx. 51kg (Quattro 10kVA class) |
| Enclosure material / colour | Aluminium, blue (Victron RAL 5012) |
| Ingress protection | IP21 (typical for Quattro inverter/charger family) |
| Environmental | |
| Operating temperature | Approx. -40°C to +65°C (derating above 40°C) |
| Humidity (non‑condensing) | Up to 95% RH (non‑condensing) |
| Maximum altitude | Up to 3,500m (typical Quattro datasheet rating) |
| Connectivity & Control | |
| VE.Bus ports | Yes – for parallel/three‑phase operation, remote monitoring and system integration |
| Programmable relay | Multiple programmable relays for alarms and generator start/stop (family spec) |
| Remote on/off | Yes – remote control capability for system integration |
| Compliance & Warranty | |
| Safety standards | Designed to comply with EN‑IEC safety standards for inverters and chargers (Quattro series) |
| EMC standards | Meets relevant EN‑IEC emission and immunity standards (family spec) |
| Warranty | Victron multi‑year limited warranty (duration subject to regional Victron policy) |
