✨ New Arrivals Just Dropped!Explore
HomeStore
Ideal Atlantic C24 Combi Boiler Bundle with Vertical Flue, Connector & MagnaClean Micro1 Filter Pack
Ideal Atlantic C24 Combi Boiler Bundle with Vertical Flue, Connector & MagnaClean Micro1 Filter Pack
Ideal Atlantic C24 Combi Boiler, Vertical Flue, Connector & MagnaClean Micro1 Filter Pack (MPNs: 223491 + 211039 + FL1-03-07129) is a value‑driven system pack for small to medium‑sized UK homes needing a compact, efficient gas combi boiler with a vertical flue solution and built‑in system protection. The pack includes the Ideal Atlantic C24 combi boiler, an Ideal vertical roof flue kit with connector, and an Adey MagnaClean Micro 22mm filter to safeguard the boiler and radiators.
What’s Included
- Ideal Atlantic C24 combi boiler – 24kW nominal output gas‑fired combination boiler (Ideal MPN: 223491).
- Ideal Vertical Flue Roof Kit with connector – complete vertical roof terminal, vertical connector and bracket for flue runs through flat or pitched roofs (Ideal MPN: 211039).
- Adey MagnaClean Micro1 filter 22mm – compact in‑line magnetic system filter for ongoing sludge and debris protection (Adey MPN: FL1-03-07129).
Ideal Atlantic C24 Combi Boiler – Key Features
- 24kW domestic hot water output – maximum DHW output approx. 24.2kW with a flow rate around 9.9 litres per minute at 35°C temperature rise, ideal for a single bathroom home.
- High‑efficiency, ErP A‑rated – A‑rated for both space heating and domestic hot water efficiency to help reduce gas bills and emissions.
- Compact cupboard fit – approximate dimensions 700mm (H) x 395mm (W) x 285mm (D), designed to fit within a standard kitchen cupboard.
- Built‑in mechanical timer / clock – integrated programmer for basic on/off scheduling (depending on variant).
- Frost protection – built‑in frost protection function for safer installation in cooler locations such as lofts or garages.
- Quiet, lightweight design – low lift weight (around 33–36kg packaged) and compact case for easier handling and installation.
- Ideal for small to medium homes – central heating output up to approx. 24–25kW (about 80–85,000 BTU/h), suitable for typical UK 2–3 bed properties, subject to heat‑loss calculation.
- Natural gas combi – sealed, fan‑flued, modulating combi boiler using natural gas as fuel.
Ideal Vertical Flue Roof Kit with Connector – Key Features
- Complete vertical flue solution – includes vertical roof terminal, vertical connector/adaptor and support bracket for flue runs through flat or pitched roofs.
- Compatible with Ideal ranges – designed for use with Ideal Logic, Logic+, Vogue and related boilers; Atlantic C24 uses the same flue interface as Logic‑family appliances (check manual/compatibility before install).
- Push‑fit connections – simple push‑fit, twist‑lock joints for faster assembly and alignment on site.
- Weather‑resistant finish – anti‑corrosive materials and coated terminal for long life and a neat roof appearance.
- Roof penetration use – suitable where the flue must terminate above the roof rather than through a side wall, in line with flue siting regulations.
MagnaClean Micro1 Filter – Key Features
- Compact 22mm magnetic filter – small‑footprint domestic system filter designed to capture magnetite sludge and debris in central heating systems.
- In‑line, slip‑socket valves – 22mm compression isolation valves with slip‑socket design and ~98mm pipe cut‑out for quick installation and retrofit.
- Service and flushing ports – incorporates drain and vent points, and can be used with Adey MagnaCleanse for system flushing.
- Protects boiler & radiators – helps maintain efficiency, reduce wear on components and extend boiler life by keeping system water cleaner.
- 2‑year warranty – supplied ready to fit with a manufacturer warranty when installed to guidance.
Why Choose This Pack?
- Complete boiler & flue solution – boiler plus vertical roof flue kit and connector simplifies specification for installations needing a roof termination.
- Built‑in system protection – MagnaClean Micro1 filter helps keep the Atlantic C24 and heating system clean, supporting efficiency and reliability over time.
- Space‑saving, efficient combi – compact A‑rated combi boiler suitable for most small to medium UK homes where cupboard fit and easy installation are important.
Installation Notes
- All gas, flue and electrical work must be carried out by suitably qualified engineers (e.g. Gas Safe registered) in accordance with Ideal installation instructions and UK regulations.
- Vertical flue siting clearances, maximum lengths and support requirements must follow Ideal’s flue design tables and use the supplied vertical connector and bracket.
- Install the MagnaClean Micro1 on the return pipe to the boiler, observing flow direction, with sufficient clearance for servicing and sludge removal.
- Flush and clean the system, add inhibitor and correctly commission the boiler, filter and controls to maintain warranty and ensure efficient operation.
$1,650.65
Ideal Atlantic C24 Combi Boiler Bundle with Vertical Flue, Connector & MagnaClean Micro1 Filter Pack—
$1,650.65
More Images
Ideal Atlantic C24 Combi Boiler Bundle with Vertical Flue, Connector & MagnaClean Micro1 Filter Pack
Ideal Atlantic C24 Combi Boiler, Vertical Flue, Connector & MagnaClean Micro1 Filter Pack (MPNs: 223491 + 211039 + FL1-03-07129) is a value‑driven system pack for small to medium‑sized UK homes needing a compact, efficient gas combi boiler with a vertical flue solution and built‑in system protection. The pack includes the Ideal Atlantic C24 combi boiler, an Ideal vertical roof flue kit with connector, and an Adey MagnaClean Micro 22mm filter to safeguard the boiler and radiators.
What’s Included
- Ideal Atlantic C24 combi boiler – 24kW nominal output gas‑fired combination boiler (Ideal MPN: 223491).
- Ideal Vertical Flue Roof Kit with connector – complete vertical roof terminal, vertical connector and bracket for flue runs through flat or pitched roofs (Ideal MPN: 211039).
- Adey MagnaClean Micro1 filter 22mm – compact in‑line magnetic system filter for ongoing sludge and debris protection (Adey MPN: FL1-03-07129).
Ideal Atlantic C24 Combi Boiler – Key Features
- 24kW domestic hot water output – maximum DHW output approx. 24.2kW with a flow rate around 9.9 litres per minute at 35°C temperature rise, ideal for a single bathroom home.
- High‑efficiency, ErP A‑rated – A‑rated for both space heating and domestic hot water efficiency to help reduce gas bills and emissions.
- Compact cupboard fit – approximate dimensions 700mm (H) x 395mm (W) x 285mm (D), designed to fit within a standard kitchen cupboard.
- Built‑in mechanical timer / clock – integrated programmer for basic on/off scheduling (depending on variant).
- Frost protection – built‑in frost protection function for safer installation in cooler locations such as lofts or garages.
- Quiet, lightweight design – low lift weight (around 33–36kg packaged) and compact case for easier handling and installation.
- Ideal for small to medium homes – central heating output up to approx. 24–25kW (about 80–85,000 BTU/h), suitable for typical UK 2–3 bed properties, subject to heat‑loss calculation.
- Natural gas combi – sealed, fan‑flued, modulating combi boiler using natural gas as fuel.
Ideal Vertical Flue Roof Kit with Connector – Key Features
- Complete vertical flue solution – includes vertical roof terminal, vertical connector/adaptor and support bracket for flue runs through flat or pitched roofs.
- Compatible with Ideal ranges – designed for use with Ideal Logic, Logic+, Vogue and related boilers; Atlantic C24 uses the same flue interface as Logic‑family appliances (check manual/compatibility before install).
- Push‑fit connections – simple push‑fit, twist‑lock joints for faster assembly and alignment on site.
- Weather‑resistant finish – anti‑corrosive materials and coated terminal for long life and a neat roof appearance.
- Roof penetration use – suitable where the flue must terminate above the roof rather than through a side wall, in line with flue siting regulations.
MagnaClean Micro1 Filter – Key Features
- Compact 22mm magnetic filter – small‑footprint domestic system filter designed to capture magnetite sludge and debris in central heating systems.
- In‑line, slip‑socket valves – 22mm compression isolation valves with slip‑socket design and ~98mm pipe cut‑out for quick installation and retrofit.
- Service and flushing ports – incorporates drain and vent points, and can be used with Adey MagnaCleanse for system flushing.
- Protects boiler & radiators – helps maintain efficiency, reduce wear on components and extend boiler life by keeping system water cleaner.
- 2‑year warranty – supplied ready to fit with a manufacturer warranty when installed to guidance.
Why Choose This Pack?
- Complete boiler & flue solution – boiler plus vertical roof flue kit and connector simplifies specification for installations needing a roof termination.
- Built‑in system protection – MagnaClean Micro1 filter helps keep the Atlantic C24 and heating system clean, supporting efficiency and reliability over time.
- Space‑saving, efficient combi – compact A‑rated combi boiler suitable for most small to medium UK homes where cupboard fit and easy installation are important.
Installation Notes
- All gas, flue and electrical work must be carried out by suitably qualified engineers (e.g. Gas Safe registered) in accordance with Ideal installation instructions and UK regulations.
- Vertical flue siting clearances, maximum lengths and support requirements must follow Ideal’s flue design tables and use the supplied vertical connector and bracket.
- Install the MagnaClean Micro1 on the return pipe to the boiler, observing flow direction, with sufficient clearance for servicing and sludge removal.
- Flush and clean the system, add inhibitor and correctly commission the boiler, filter and controls to maintain warranty and ensure efficient operation.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Ideal Atlantic C24 Combi Boiler, Vertical Flue, Connector & MagnaClean Micro1 Filter Pack (MPNs: 223491 + 211039 + FL1-03-07129) is a value‑driven system pack for small to medium‑sized UK homes needing a compact, efficient gas combi boiler with a vertical flue solution and built‑in system protection. The pack includes the Ideal Atlantic C24 combi boiler, an Ideal vertical roof flue kit with connector, and an Adey MagnaClean Micro 22mm filter to safeguard the boiler and radiators.
What’s Included
- Ideal Atlantic C24 combi boiler – 24kW nominal output gas‑fired combination boiler (Ideal MPN: 223491).
- Ideal Vertical Flue Roof Kit with connector – complete vertical roof terminal, vertical connector and bracket for flue runs through flat or pitched roofs (Ideal MPN: 211039).
- Adey MagnaClean Micro1 filter 22mm – compact in‑line magnetic system filter for ongoing sludge and debris protection (Adey MPN: FL1-03-07129).
Ideal Atlantic C24 Combi Boiler – Key Features
- 24kW domestic hot water output – maximum DHW output approx. 24.2kW with a flow rate around 9.9 litres per minute at 35°C temperature rise, ideal for a single bathroom home.
- High‑efficiency, ErP A‑rated – A‑rated for both space heating and domestic hot water efficiency to help reduce gas bills and emissions.
- Compact cupboard fit – approximate dimensions 700mm (H) x 395mm (W) x 285mm (D), designed to fit within a standard kitchen cupboard.
- Built‑in mechanical timer / clock – integrated programmer for basic on/off scheduling (depending on variant).
- Frost protection – built‑in frost protection function for safer installation in cooler locations such as lofts or garages.
- Quiet, lightweight design – low lift weight (around 33–36kg packaged) and compact case for easier handling and installation.
- Ideal for small to medium homes – central heating output up to approx. 24–25kW (about 80–85,000 BTU/h), suitable for typical UK 2–3 bed properties, subject to heat‑loss calculation.
- Natural gas combi – sealed, fan‑flued, modulating combi boiler using natural gas as fuel.
Ideal Vertical Flue Roof Kit with Connector – Key Features
- Complete vertical flue solution – includes vertical roof terminal, vertical connector/adaptor and support bracket for flue runs through flat or pitched roofs.
- Compatible with Ideal ranges – designed for use with Ideal Logic, Logic+, Vogue and related boilers; Atlantic C24 uses the same flue interface as Logic‑family appliances (check manual/compatibility before install).
- Push‑fit connections – simple push‑fit, twist‑lock joints for faster assembly and alignment on site.
- Weather‑resistant finish – anti‑corrosive materials and coated terminal for long life and a neat roof appearance.
- Roof penetration use – suitable where the flue must terminate above the roof rather than through a side wall, in line with flue siting regulations.
MagnaClean Micro1 Filter – Key Features
- Compact 22mm magnetic filter – small‑footprint domestic system filter designed to capture magnetite sludge and debris in central heating systems.
- In‑line, slip‑socket valves – 22mm compression isolation valves with slip‑socket design and ~98mm pipe cut‑out for quick installation and retrofit.
- Service and flushing ports – incorporates drain and vent points, and can be used with Adey MagnaCleanse for system flushing.
- Protects boiler & radiators – helps maintain efficiency, reduce wear on components and extend boiler life by keeping system water cleaner.
- 2‑year warranty – supplied ready to fit with a manufacturer warranty when installed to guidance.
Why Choose This Pack?
- Complete boiler & flue solution – boiler plus vertical roof flue kit and connector simplifies specification for installations needing a roof termination.
- Built‑in system protection – MagnaClean Micro1 filter helps keep the Atlantic C24 and heating system clean, supporting efficiency and reliability over time.
- Space‑saving, efficient combi – compact A‑rated combi boiler suitable for most small to medium UK homes where cupboard fit and easy installation are important.
Installation Notes
- All gas, flue and electrical work must be carried out by suitably qualified engineers (e.g. Gas Safe registered) in accordance with Ideal installation instructions and UK regulations.
- Vertical flue siting clearances, maximum lengths and support requirements must follow Ideal’s flue design tables and use the supplied vertical connector and bracket.
- Install the MagnaClean Micro1 on the return pipe to the boiler, observing flow direction, with sufficient clearance for servicing and sludge removal.
- Flush and clean the system, add inhibitor and correctly commission the boiler, filter and controls to maintain warranty and ensure efficient operation.
