✨ New Arrivals Just Dropped!Explore
Atlantic Nanto Lite 2kW 15L Under Sink Electric Water Heater
Atlantic Nanto Lite 2kW 15L Under Sink Electric Water Heater (MPN: AH821549) is a compact unvented hot water heater engineered to fit neatly under a sink and deliver almost instant hot water at the point of use. With a 15 litre storage tank and 2kW heating element, it is ideal for kitchens, utility rooms, office tea points and small washrooms where a full‑size cylinder is not required.
Key Features
- 2kW heating element – provides fast heat‑up and quick recovery for everyday handwashing, dishwashing and light‑duty hot water needs.
- 15 litre storage capacity – sized for single or multiple outlets with moderate draw‑off, such as a kitchen sink and basin.
- Under‑sink, wall‑mounted design – compact footprint installs discreetly below the sink to save space and minimise pipe runs.
- Unvented point‑of‑use heater – delivers mains‑pressure hot water without the need for a separate feed tank.
- Diamond enamel glass‑lined tank – corrosion‑resistant internal coating for durability and long service life.
- Magnesium anode protection – sacrificial anode helps protect the tank against corrosion, especially in harder water areas.
- High‑density CFC‑free insulation – polyurethane foam around the tank reduces standing heat losses and improves efficiency.
- Manual control with eco and vacation modes – front analogue dial for temperature setting, eco 55°C mode and holiday 7°C mode for energy savings.
- ErP B hot water rating – energy‑efficient design with low standing losses for its size and duty.
- 2‑year manufacturer warranty – subject to Atlantic terms and correct installation.
Performance & Applications
- Typical use: hot water for sinks and basins in homes, offices, shops, small cafés and similar light‑commercial settings.
- Heat‑up times: indicative heat‑up time around 18 minutes for a 35°C temperature rise and around 27 minutes for a 50°C rise.
- Energy consumption: typical standing energy consumption about 0.58 kWh per 24 hours at standard test conditions.
- Best suited to: locations with no existing hot water distribution or where long pipe runs from a central cylinder would cause delay and waste.
Technical Highlights
- Brand: Atlantic – Nanto Lite range.
- MPN: AH821549.
- Tank volume: 15 litres.
- Rated output: 2kW electric immersion element.
- Installation position: under sink, wall‑mounted.
- Supply: 230V single‑phase, 50Hz (typical UK domestic supply).
- Dimensions (H x W x D): approx. 378 x 360 x 321 mm.
- Weight (empty): about 8 kg.
- Heat‑up time to 50°C: ~27 minutes; to 35°C: ~18 minutes.
- Standing loss / 24h: ~0.58 kWh.
- Energy label: ErP hot water rating B.
- Wiring location: bottom left connection.
- Colour: white.
Installation Notes
- Must be installed by a competent person in accordance with local plumbing and wiring regulations and Atlantic’s installation manual.
- Designed as an unvented undersink heater; fit appropriate safety kit (pressure relief, expansion control and check valves) as specified by the manufacturer.
- Mount on a suitable wall under the sink with access for pipework, electrical connection and future maintenance (including anode inspection).
- Set temperature and eco/vacation modes via the front dial to balance comfort, scale reduction and energy savings.
$178.16
Atlantic Nanto Lite 2kW 15L Under Sink Electric Water Heater—
$178.16
More Images
Atlantic Nanto Lite 2kW 15L Under Sink Electric Water Heater
Atlantic Nanto Lite 2kW 15L Under Sink Electric Water Heater (MPN: AH821549) is a compact unvented hot water heater engineered to fit neatly under a sink and deliver almost instant hot water at the point of use. With a 15 litre storage tank and 2kW heating element, it is ideal for kitchens, utility rooms, office tea points and small washrooms where a full‑size cylinder is not required.
Key Features
- 2kW heating element – provides fast heat‑up and quick recovery for everyday handwashing, dishwashing and light‑duty hot water needs.
- 15 litre storage capacity – sized for single or multiple outlets with moderate draw‑off, such as a kitchen sink and basin.
- Under‑sink, wall‑mounted design – compact footprint installs discreetly below the sink to save space and minimise pipe runs.
- Unvented point‑of‑use heater – delivers mains‑pressure hot water without the need for a separate feed tank.
- Diamond enamel glass‑lined tank – corrosion‑resistant internal coating for durability and long service life.
- Magnesium anode protection – sacrificial anode helps protect the tank against corrosion, especially in harder water areas.
- High‑density CFC‑free insulation – polyurethane foam around the tank reduces standing heat losses and improves efficiency.
- Manual control with eco and vacation modes – front analogue dial for temperature setting, eco 55°C mode and holiday 7°C mode for energy savings.
- ErP B hot water rating – energy‑efficient design with low standing losses for its size and duty.
- 2‑year manufacturer warranty – subject to Atlantic terms and correct installation.
Performance & Applications
- Typical use: hot water for sinks and basins in homes, offices, shops, small cafés and similar light‑commercial settings.
- Heat‑up times: indicative heat‑up time around 18 minutes for a 35°C temperature rise and around 27 minutes for a 50°C rise.
- Energy consumption: typical standing energy consumption about 0.58 kWh per 24 hours at standard test conditions.
- Best suited to: locations with no existing hot water distribution or where long pipe runs from a central cylinder would cause delay and waste.
Technical Highlights
- Brand: Atlantic – Nanto Lite range.
- MPN: AH821549.
- Tank volume: 15 litres.
- Rated output: 2kW electric immersion element.
- Installation position: under sink, wall‑mounted.
- Supply: 230V single‑phase, 50Hz (typical UK domestic supply).
- Dimensions (H x W x D): approx. 378 x 360 x 321 mm.
- Weight (empty): about 8 kg.
- Heat‑up time to 50°C: ~27 minutes; to 35°C: ~18 minutes.
- Standing loss / 24h: ~0.58 kWh.
- Energy label: ErP hot water rating B.
- Wiring location: bottom left connection.
- Colour: white.
Installation Notes
- Must be installed by a competent person in accordance with local plumbing and wiring regulations and Atlantic’s installation manual.
- Designed as an unvented undersink heater; fit appropriate safety kit (pressure relief, expansion control and check valves) as specified by the manufacturer.
- Mount on a suitable wall under the sink with access for pipework, electrical connection and future maintenance (including anode inspection).
- Set temperature and eco/vacation modes via the front dial to balance comfort, scale reduction and energy savings.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Atlantic Nanto Lite 2kW 15L Under Sink Electric Water Heater (MPN: AH821549) is a compact unvented hot water heater engineered to fit neatly under a sink and deliver almost instant hot water at the point of use. With a 15 litre storage tank and 2kW heating element, it is ideal for kitchens, utility rooms, office tea points and small washrooms where a full‑size cylinder is not required.
Key Features
- 2kW heating element – provides fast heat‑up and quick recovery for everyday handwashing, dishwashing and light‑duty hot water needs.
- 15 litre storage capacity – sized for single or multiple outlets with moderate draw‑off, such as a kitchen sink and basin.
- Under‑sink, wall‑mounted design – compact footprint installs discreetly below the sink to save space and minimise pipe runs.
- Unvented point‑of‑use heater – delivers mains‑pressure hot water without the need for a separate feed tank.
- Diamond enamel glass‑lined tank – corrosion‑resistant internal coating for durability and long service life.
- Magnesium anode protection – sacrificial anode helps protect the tank against corrosion, especially in harder water areas.
- High‑density CFC‑free insulation – polyurethane foam around the tank reduces standing heat losses and improves efficiency.
- Manual control with eco and vacation modes – front analogue dial for temperature setting, eco 55°C mode and holiday 7°C mode for energy savings.
- ErP B hot water rating – energy‑efficient design with low standing losses for its size and duty.
- 2‑year manufacturer warranty – subject to Atlantic terms and correct installation.
Performance & Applications
- Typical use: hot water for sinks and basins in homes, offices, shops, small cafés and similar light‑commercial settings.
- Heat‑up times: indicative heat‑up time around 18 minutes for a 35°C temperature rise and around 27 minutes for a 50°C rise.
- Energy consumption: typical standing energy consumption about 0.58 kWh per 24 hours at standard test conditions.
- Best suited to: locations with no existing hot water distribution or where long pipe runs from a central cylinder would cause delay and waste.
Technical Highlights
- Brand: Atlantic – Nanto Lite range.
- MPN: AH821549.
- Tank volume: 15 litres.
- Rated output: 2kW electric immersion element.
- Installation position: under sink, wall‑mounted.
- Supply: 230V single‑phase, 50Hz (typical UK domestic supply).
- Dimensions (H x W x D): approx. 378 x 360 x 321 mm.
- Weight (empty): about 8 kg.
- Heat‑up time to 50°C: ~27 minutes; to 35°C: ~18 minutes.
- Standing loss / 24h: ~0.58 kWh.
- Energy label: ErP hot water rating B.
- Wiring location: bottom left connection.
- Colour: white.
Installation Notes
- Must be installed by a competent person in accordance with local plumbing and wiring regulations and Atlantic’s installation manual.
- Designed as an unvented undersink heater; fit appropriate safety kit (pressure relief, expansion control and check valves) as specified by the manufacturer.
- Mount on a suitable wall under the sink with access for pipework, electrical connection and future maintenance (including anode inspection).
- Set temperature and eco/vacation modes via the front dial to balance comfort, scale reduction and energy savings.
