✨ New Arrivals Just Dropped!Explore
Homely Smart Controller (Hub + Node + Samsung Modbus)
The Homely Smart Controller (Hub + Node + Samsung Modbus) is a complete optimisation kit for Samsung air‑source heat pumps, combining the Homely Hub, a wireless Node and the Samsung Modbus interface (MIM‑B19N). It gives Homely direct digital control of Samsung heat pumps for deeper optimisation, lower running costs and full remote monitoring.
What’s Included
- Homely Hub – central smart controller that connects to the internet, the Homely cloud platform and the Homely app, running all optimisation and scheduling.
- Homely Node – on‑system interface that exchanges data and control signals between the Hub and the Samsung heat pump via Modbus.
- Samsung Modbus interface (MIM‑B19N) – dedicated Samsung Modbus adaptor that enables two‑way digital communication with the ASHP for advanced control and monitoring.
Samsung‑Specific Functionality
- Native Modbus integration – Homely can read key operating data and write control set‑points directly to Samsung EHS units through the MIM‑B19N interface.
- Fixed‑speed pump note – for systems using a fixed‑speed circulation pump with a Samsung ASHP, a RELPOL relay such as R15:2012‑23‑5239‑WTL is recommended for correct interfacing.
- Brand‑specific kit – this Samsung Modbus bundle is required for Samsung heat pumps; other supported brands such as Riello and Bosch use the standard Hub + Node kit without Modbus.
Key Benefits
- Simple installation – automatic weather compensation curves eliminate manual curve setup, speeding up commissioning and reducing configuration errors.
- Up to around 31% cheaper running costs – independent testing at Salford University’s Energy House Labs shows Homely optimisation can significantly cut heat pump bills compared with basic controls.
- Remote monitoring with Connect / Connect Pro – view live and historic data, check system status and adjust key parameters over the air to reduce call‑outs and keep systems optimised.
- Wide compatibility – designed specifically for heat pumps and compatible with a wide range of Samsung EHS models via the MIM‑B19N interface.
ECO4 & Commercial Advantages
- ECO4 Innovation Measure “034” – Homely is approved as an ECO4 Innovation Measure, providing a 25% uplift to the controls portion of the Partial Project Score without affecting SAP.
- Stronger customer proposition – lower, more predictable running costs help bring Samsung heat pump bills in line with or below those of a gas boiler, making ROI discussions easier.
- Fewer call‑backs – smart optimisation plus powerful remote diagnostics reduce post‑installation adjustments and site visits.
Installer Process & Best Practice
- Register as a Homely installer to access training, documentation and the Connect / Connect Pro platform, then order the Samsung kit for relevant projects.
- Fit and configure the MIM‑B19N module on the Samsung ASHP following Samsung’s Modbus instructions, then install and wire the Hub and Node as per Homely guidance.
- Commission via the Homely Installer App, confirm communication with the heat pump, and use Connect Pro to monitor performance and fine‑tune remotely over the life of the system.
$878.64
Homely Smart Controller (Hub + Node + Samsung Modbus)—
$878.64
More Images
Homely Smart Controller (Hub + Node + Samsung Modbus)
The Homely Smart Controller (Hub + Node + Samsung Modbus) is a complete optimisation kit for Samsung air‑source heat pumps, combining the Homely Hub, a wireless Node and the Samsung Modbus interface (MIM‑B19N). It gives Homely direct digital control of Samsung heat pumps for deeper optimisation, lower running costs and full remote monitoring.
What’s Included
- Homely Hub – central smart controller that connects to the internet, the Homely cloud platform and the Homely app, running all optimisation and scheduling.
- Homely Node – on‑system interface that exchanges data and control signals between the Hub and the Samsung heat pump via Modbus.
- Samsung Modbus interface (MIM‑B19N) – dedicated Samsung Modbus adaptor that enables two‑way digital communication with the ASHP for advanced control and monitoring.
Samsung‑Specific Functionality
- Native Modbus integration – Homely can read key operating data and write control set‑points directly to Samsung EHS units through the MIM‑B19N interface.
- Fixed‑speed pump note – for systems using a fixed‑speed circulation pump with a Samsung ASHP, a RELPOL relay such as R15:2012‑23‑5239‑WTL is recommended for correct interfacing.
- Brand‑specific kit – this Samsung Modbus bundle is required for Samsung heat pumps; other supported brands such as Riello and Bosch use the standard Hub + Node kit without Modbus.
Key Benefits
- Simple installation – automatic weather compensation curves eliminate manual curve setup, speeding up commissioning and reducing configuration errors.
- Up to around 31% cheaper running costs – independent testing at Salford University’s Energy House Labs shows Homely optimisation can significantly cut heat pump bills compared with basic controls.
- Remote monitoring with Connect / Connect Pro – view live and historic data, check system status and adjust key parameters over the air to reduce call‑outs and keep systems optimised.
- Wide compatibility – designed specifically for heat pumps and compatible with a wide range of Samsung EHS models via the MIM‑B19N interface.
ECO4 & Commercial Advantages
- ECO4 Innovation Measure “034” – Homely is approved as an ECO4 Innovation Measure, providing a 25% uplift to the controls portion of the Partial Project Score without affecting SAP.
- Stronger customer proposition – lower, more predictable running costs help bring Samsung heat pump bills in line with or below those of a gas boiler, making ROI discussions easier.
- Fewer call‑backs – smart optimisation plus powerful remote diagnostics reduce post‑installation adjustments and site visits.
Installer Process & Best Practice
- Register as a Homely installer to access training, documentation and the Connect / Connect Pro platform, then order the Samsung kit for relevant projects.
- Fit and configure the MIM‑B19N module on the Samsung ASHP following Samsung’s Modbus instructions, then install and wire the Hub and Node as per Homely guidance.
- Commission via the Homely Installer App, confirm communication with the heat pump, and use Connect Pro to monitor performance and fine‑tune remotely over the life of the system.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Homely Smart Controller (Hub + Node + Samsung Modbus) is a complete optimisation kit for Samsung air‑source heat pumps, combining the Homely Hub, a wireless Node and the Samsung Modbus interface (MIM‑B19N). It gives Homely direct digital control of Samsung heat pumps for deeper optimisation, lower running costs and full remote monitoring.
What’s Included
- Homely Hub – central smart controller that connects to the internet, the Homely cloud platform and the Homely app, running all optimisation and scheduling.
- Homely Node – on‑system interface that exchanges data and control signals between the Hub and the Samsung heat pump via Modbus.
- Samsung Modbus interface (MIM‑B19N) – dedicated Samsung Modbus adaptor that enables two‑way digital communication with the ASHP for advanced control and monitoring.
Samsung‑Specific Functionality
- Native Modbus integration – Homely can read key operating data and write control set‑points directly to Samsung EHS units through the MIM‑B19N interface.
- Fixed‑speed pump note – for systems using a fixed‑speed circulation pump with a Samsung ASHP, a RELPOL relay such as R15:2012‑23‑5239‑WTL is recommended for correct interfacing.
- Brand‑specific kit – this Samsung Modbus bundle is required for Samsung heat pumps; other supported brands such as Riello and Bosch use the standard Hub + Node kit without Modbus.
Key Benefits
- Simple installation – automatic weather compensation curves eliminate manual curve setup, speeding up commissioning and reducing configuration errors.
- Up to around 31% cheaper running costs – independent testing at Salford University’s Energy House Labs shows Homely optimisation can significantly cut heat pump bills compared with basic controls.
- Remote monitoring with Connect / Connect Pro – view live and historic data, check system status and adjust key parameters over the air to reduce call‑outs and keep systems optimised.
- Wide compatibility – designed specifically for heat pumps and compatible with a wide range of Samsung EHS models via the MIM‑B19N interface.
ECO4 & Commercial Advantages
- ECO4 Innovation Measure “034” – Homely is approved as an ECO4 Innovation Measure, providing a 25% uplift to the controls portion of the Partial Project Score without affecting SAP.
- Stronger customer proposition – lower, more predictable running costs help bring Samsung heat pump bills in line with or below those of a gas boiler, making ROI discussions easier.
- Fewer call‑backs – smart optimisation plus powerful remote diagnostics reduce post‑installation adjustments and site visits.
Installer Process & Best Practice
- Register as a Homely installer to access training, documentation and the Connect / Connect Pro platform, then order the Samsung kit for relevant projects.
- Fit and configure the MIM‑B19N module on the Samsung ASHP following Samsung’s Modbus instructions, then install and wire the Hub and Node as per Homely guidance.
- Commission via the Homely Installer App, confirm communication with the heat pump, and use Connect Pro to monitor performance and fine‑tune remotely over the life of the system.
