Heatmiser neoStat v3 Programmable Thermostat - White
The Heatmiser neoStat v3 Programmable Thermostat - White is a 230V smart room thermostat designed as a direct replacement for neoStat v2 and other 3‑wire thermostats, offering app control (via neoHub), multiple time/temperature programs, and a clean, flush-mounted white finish.
Product Description
neoStat v3 combines a slimline backlit display with illuminated touch keys and can be configured either as a programmable room thermostat or as a simple timer. When paired with the neoHub, it becomes part of the Heatmiser neo smart control ecosystem, enabling remote control, scheduling and integration with leading home automation platforms.
Key Features
- V2 replacement: Fully compatible form factor and wiring with neoStat v2 for straightforward upgrades.
- Programmable control: Multiple operating modes (7‑day, 5/2‑day, all days same/different) with up to 4 comfort levels per day (expandable to 6 with neoHub G2).
- Smart operation: Optimum Start, Temperature Hold and Holiday modes improve comfort and energy efficiency.
- Mesh connectivity: Communicates with neoHub via wireless Mesh for improved range and reliability across the property.
- Dual function: Can be set as a thermostat or as a timer to control heating zones, towel rails or lighting circuits.
- User-friendly design: White backlit display with proximity activation and illuminated soft‑touch keys.
Technical Details
- Power supply: 230V AC, 50Hz.
- Switching: Volt-free relay output for boiler/zone valve control (suitable for water-based heating).
- Sensor options: Built‑in air sensor; compatible with 10K, 12K and 15K NTC floor probes for underfloor applications.
- Temperature control: 0.5°C setpoint increments with frost protection and adjustable setpoint limits.
- Programming interval: 5‑minute time steps for fine scheduling control.
- Display: White backlight, auto‑off after around 30 seconds to reduce power consumption.
- Smart integration: Full app control and automation features when used with neoHub G2 (not compatible with neoHub G1).
Physical Specifications
- Colour: White.
- Mounting: Flush‑mounted to a standard 35mm (minimum) back box.
- Front interface: Flat fascia with touch keys and clear LCD.
- Form factor: Same footprint and fixing pattern as neoStat v2 for simple swap‑out upgrades.
System & Application Notes
- Typical use: Room thermostat for water-based radiator or underfloor heating zones; also suitable as a timer for auxiliary loads.
- Wiring: Designed to replace existing 3‑wire thermostats (live, switched live, neutral) without rewiring in most cases.
- Smart control: Use with neoHub and neoApp for multi‑zone control, remote access and integration with voice assistants and smart home platforms.
- Upgrade path: Recommended replacement for older 230V Heatmiser models and neoStat v2 where enhanced Mesh performance and v3 features are desired.
Original: $91.78
-65%$91.78
$32.12More Images
Heatmiser neoStat v3 Programmable Thermostat - White
The Heatmiser neoStat v3 Programmable Thermostat - White is a 230V smart room thermostat designed as a direct replacement for neoStat v2 and other 3‑wire thermostats, offering app control (via neoHub), multiple time/temperature programs, and a clean, flush-mounted white finish.
Product Description
neoStat v3 combines a slimline backlit display with illuminated touch keys and can be configured either as a programmable room thermostat or as a simple timer. When paired with the neoHub, it becomes part of the Heatmiser neo smart control ecosystem, enabling remote control, scheduling and integration with leading home automation platforms.
Key Features
- V2 replacement: Fully compatible form factor and wiring with neoStat v2 for straightforward upgrades.
- Programmable control: Multiple operating modes (7‑day, 5/2‑day, all days same/different) with up to 4 comfort levels per day (expandable to 6 with neoHub G2).
- Smart operation: Optimum Start, Temperature Hold and Holiday modes improve comfort and energy efficiency.
- Mesh connectivity: Communicates with neoHub via wireless Mesh for improved range and reliability across the property.
- Dual function: Can be set as a thermostat or as a timer to control heating zones, towel rails or lighting circuits.
- User-friendly design: White backlit display with proximity activation and illuminated soft‑touch keys.
Technical Details
- Power supply: 230V AC, 50Hz.
- Switching: Volt-free relay output for boiler/zone valve control (suitable for water-based heating).
- Sensor options: Built‑in air sensor; compatible with 10K, 12K and 15K NTC floor probes for underfloor applications.
- Temperature control: 0.5°C setpoint increments with frost protection and adjustable setpoint limits.
- Programming interval: 5‑minute time steps for fine scheduling control.
- Display: White backlight, auto‑off after around 30 seconds to reduce power consumption.
- Smart integration: Full app control and automation features when used with neoHub G2 (not compatible with neoHub G1).
Physical Specifications
- Colour: White.
- Mounting: Flush‑mounted to a standard 35mm (minimum) back box.
- Front interface: Flat fascia with touch keys and clear LCD.
- Form factor: Same footprint and fixing pattern as neoStat v2 for simple swap‑out upgrades.
System & Application Notes
- Typical use: Room thermostat for water-based radiator or underfloor heating zones; also suitable as a timer for auxiliary loads.
- Wiring: Designed to replace existing 3‑wire thermostats (live, switched live, neutral) without rewiring in most cases.
- Smart control: Use with neoHub and neoApp for multi‑zone control, remote access and integration with voice assistants and smart home platforms.
- Upgrade path: Recommended replacement for older 230V Heatmiser models and neoStat v2 where enhanced Mesh performance and v3 features are desired.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heatmiser neoStat v3 Programmable Thermostat - White is a 230V smart room thermostat designed as a direct replacement for neoStat v2 and other 3‑wire thermostats, offering app control (via neoHub), multiple time/temperature programs, and a clean, flush-mounted white finish.
Product Description
neoStat v3 combines a slimline backlit display with illuminated touch keys and can be configured either as a programmable room thermostat or as a simple timer. When paired with the neoHub, it becomes part of the Heatmiser neo smart control ecosystem, enabling remote control, scheduling and integration with leading home automation platforms.
Key Features
- V2 replacement: Fully compatible form factor and wiring with neoStat v2 for straightforward upgrades.
- Programmable control: Multiple operating modes (7‑day, 5/2‑day, all days same/different) with up to 4 comfort levels per day (expandable to 6 with neoHub G2).
- Smart operation: Optimum Start, Temperature Hold and Holiday modes improve comfort and energy efficiency.
- Mesh connectivity: Communicates with neoHub via wireless Mesh for improved range and reliability across the property.
- Dual function: Can be set as a thermostat or as a timer to control heating zones, towel rails or lighting circuits.
- User-friendly design: White backlit display with proximity activation and illuminated soft‑touch keys.
Technical Details
- Power supply: 230V AC, 50Hz.
- Switching: Volt-free relay output for boiler/zone valve control (suitable for water-based heating).
- Sensor options: Built‑in air sensor; compatible with 10K, 12K and 15K NTC floor probes for underfloor applications.
- Temperature control: 0.5°C setpoint increments with frost protection and adjustable setpoint limits.
- Programming interval: 5‑minute time steps for fine scheduling control.
- Display: White backlight, auto‑off after around 30 seconds to reduce power consumption.
- Smart integration: Full app control and automation features when used with neoHub G2 (not compatible with neoHub G1).
Physical Specifications
- Colour: White.
- Mounting: Flush‑mounted to a standard 35mm (minimum) back box.
- Front interface: Flat fascia with touch keys and clear LCD.
- Form factor: Same footprint and fixing pattern as neoStat v2 for simple swap‑out upgrades.
System & Application Notes
- Typical use: Room thermostat for water-based radiator or underfloor heating zones; also suitable as a timer for auxiliary loads.
- Wiring: Designed to replace existing 3‑wire thermostats (live, switched live, neutral) without rewiring in most cases.
- Smart control: Use with neoHub and neoApp for multi‑zone control, remote access and integration with voice assistants and smart home platforms.
- Upgrade path: Recommended replacement for older 230V Heatmiser models and neoStat v2 where enhanced Mesh performance and v3 features are desired.
