✨ New Arrivals Just Dropped!Explore
Eleven Energy North Sea EL6000 6kW Hybrid Inverter – Single Phase
HomeStore

Eleven Energy North Sea EL6000 6kW Hybrid Inverter – Single Phase

Eleven Energy North Sea EL6000 6kW Hybrid Inverter – Single Phase

Eleven Energy North Sea EL6000 6kW Hybrid Inverter – Single Phase is a smart, high‑efficiency 6kW hybrid inverter optimised specifically for Eleven’s sodium‑ion battery chemistry. Using Silicon Carbide (SiC) power electronics, it delivers higher efficiency, reduced losses and a longer service life, making it a reliable workhorse for larger domestic PV and storage systems.

Key Features

  • 6kW single-phase hybrid inverter – provides 6,000 W nominal AC output at 230 V for larger domestic loads and higher PV capacities.
  • Optimised for sodium-ion batteries – purpose-built to maximise performance and lifetime of Eleven Volta sodium-ion batteries, with matched voltage and control profiles.
  • Silicon Carbide technology – SiC-based power stage for higher efficiency, cooler operation and extended lifespan compared with conventional silicon inverters.
  • High PV input power – supports up to around 9 kWp of PV input, allowing generous array oversizing and flexible roof layouts.
  • High charge / discharge rate – battery charge/discharge current up to 100 A, enabling up to 6 kW of rapid energy transfer between batteries and loads.
  • Backup power with fast switchover – integrated EPS (emergency power supply) output with sub‑10 ms on/off‑grid switchover for supported backup circuits.
  • Smart tariff compatible – supports intelligent work modes for off‑peak charging, export limiting and smart‑home style energy optimisation.
  • Easy commissioning – simple setup and monitoring through the Eleven Energy app, giving fine-grained control over system behaviour.

PV Input (DC)

  • Max. DC input power: 9 kWp.
  • Max. input voltage: 600 V DC.
  • Starting voltage: 95 V DC.
  • MPPT voltage range: 80–550 V DC, with a full‑load MPPT window optimised in the mid‑voltage range.
  • Number of MPPTs: dual independent trackers for flexible string design.

AC Output (On‑Grid)

  • Nominal output power: 6 kW.
  • Nominal grid voltage: 230 V single phase.
  • Nominal frequency: 50 Hz.
  • Max. output current: 27.2 A.
  • Grid voltage range: 184–276 V.
  • Frequency range: 45–65 Hz.
  • Power factor: close to 1, adjustable from 0.8 leading to 0.8 lagging.
  • THDi: < 3% at rated power.

Battery Interface & Backup

  • Battery type: Eleven sodium-ion battery system (Volta modules).
  • Max. charge / discharge current: up to 100 A.
  • Charge / discharge power: up to 6 kW.
  • Battery charging / discharging efficiency: around 95% at the inverter stage.
  • EPS output: dedicated backup output capable of supplying up to 6 kW to critical loads during grid failure (subject to sufficient battery capacity).
  • Switchover time: < 10 ms between on‑grid and backup operation for supported circuits.

General & Mechanical Data

  • AC connection: single phase.
  • PV max. efficiency: up to 98%.
  • Standby power loss: ≤ 10 W.
  • Dimensions (W × H × D): 500 × 470 × 180 mm.
  • Weight: approximately 23 kg.
  • Noise emission: < 25 dB (natural convection cooling, no active fan).
  • Operating temperature range: -25°C to +60°C.
  • Humidity range: 0–100% (non‑condensing).
  • Cooling method: natural cooling (fanless) for quiet, low‑maintenance operation.
  • IP rating: IP65, suitable for indoor or outdoor installation (with appropriate shielding where required).

Monitoring, Communications & Protection

  • Monitoring: on‑unit LED indicators plus app-based monitoring through Eleven’s UK‑hosted cloud platform.
  • Communications: RS485, CAN and parallel ports for integration with batteries, meters and multi‑inverter systems.
  • Built‑in protections: DC isolator, PV insulation resistance monitoring, residual current protection, anti‑islanding, over/under‑voltage, over‑current and surge protection.
  • Compliance: designed to meet relevant safety and grid standards (including UK G99/G100 when installed and configured correctly).

Typical Applications

  • Larger domestic PV systems up to 6 kW AC with significant storage capacity for self‑consumption and backup.
  • Homes using Eleven Volta sodium‑ion batteries where cold‑climate performance, longevity and sustainability are key priorities.
  • Projects requiring smart tariff optimisation, export limiting and fine control via the Eleven Energy app and cloud platform.
$647.64

Original: $1,850.40

-65%
Eleven Energy North Sea EL6000 6kW Hybrid Inverter – Single Phase

$1,850.40

$647.64

More Images

Eleven Energy North Sea EL6000 6kW Hybrid Inverter – Single Phase - Image 2
Eleven Energy North Sea EL6000 6kW Hybrid Inverter – Single Phase - Image 3
Eleven Energy North Sea EL6000 6kW Hybrid Inverter – Single Phase - Image 4

Eleven Energy North Sea EL6000 6kW Hybrid Inverter – Single Phase

Eleven Energy North Sea EL6000 6kW Hybrid Inverter – Single Phase is a smart, high‑efficiency 6kW hybrid inverter optimised specifically for Eleven’s sodium‑ion battery chemistry. Using Silicon Carbide (SiC) power electronics, it delivers higher efficiency, reduced losses and a longer service life, making it a reliable workhorse for larger domestic PV and storage systems.

Key Features

  • 6kW single-phase hybrid inverter – provides 6,000 W nominal AC output at 230 V for larger domestic loads and higher PV capacities.
  • Optimised for sodium-ion batteries – purpose-built to maximise performance and lifetime of Eleven Volta sodium-ion batteries, with matched voltage and control profiles.
  • Silicon Carbide technology – SiC-based power stage for higher efficiency, cooler operation and extended lifespan compared with conventional silicon inverters.
  • High PV input power – supports up to around 9 kWp of PV input, allowing generous array oversizing and flexible roof layouts.
  • High charge / discharge rate – battery charge/discharge current up to 100 A, enabling up to 6 kW of rapid energy transfer between batteries and loads.
  • Backup power with fast switchover – integrated EPS (emergency power supply) output with sub‑10 ms on/off‑grid switchover for supported backup circuits.
  • Smart tariff compatible – supports intelligent work modes for off‑peak charging, export limiting and smart‑home style energy optimisation.
  • Easy commissioning – simple setup and monitoring through the Eleven Energy app, giving fine-grained control over system behaviour.

PV Input (DC)

  • Max. DC input power: 9 kWp.
  • Max. input voltage: 600 V DC.
  • Starting voltage: 95 V DC.
  • MPPT voltage range: 80–550 V DC, with a full‑load MPPT window optimised in the mid‑voltage range.
  • Number of MPPTs: dual independent trackers for flexible string design.

AC Output (On‑Grid)

  • Nominal output power: 6 kW.
  • Nominal grid voltage: 230 V single phase.
  • Nominal frequency: 50 Hz.
  • Max. output current: 27.2 A.
  • Grid voltage range: 184–276 V.
  • Frequency range: 45–65 Hz.
  • Power factor: close to 1, adjustable from 0.8 leading to 0.8 lagging.
  • THDi: < 3% at rated power.

Battery Interface & Backup

  • Battery type: Eleven sodium-ion battery system (Volta modules).
  • Max. charge / discharge current: up to 100 A.
  • Charge / discharge power: up to 6 kW.
  • Battery charging / discharging efficiency: around 95% at the inverter stage.
  • EPS output: dedicated backup output capable of supplying up to 6 kW to critical loads during grid failure (subject to sufficient battery capacity).
  • Switchover time: < 10 ms between on‑grid and backup operation for supported circuits.

General & Mechanical Data

  • AC connection: single phase.
  • PV max. efficiency: up to 98%.
  • Standby power loss: ≤ 10 W.
  • Dimensions (W × H × D): 500 × 470 × 180 mm.
  • Weight: approximately 23 kg.
  • Noise emission: < 25 dB (natural convection cooling, no active fan).
  • Operating temperature range: -25°C to +60°C.
  • Humidity range: 0–100% (non‑condensing).
  • Cooling method: natural cooling (fanless) for quiet, low‑maintenance operation.
  • IP rating: IP65, suitable for indoor or outdoor installation (with appropriate shielding where required).

Monitoring, Communications & Protection

  • Monitoring: on‑unit LED indicators plus app-based monitoring through Eleven’s UK‑hosted cloud platform.
  • Communications: RS485, CAN and parallel ports for integration with batteries, meters and multi‑inverter systems.
  • Built‑in protections: DC isolator, PV insulation resistance monitoring, residual current protection, anti‑islanding, over/under‑voltage, over‑current and surge protection.
  • Compliance: designed to meet relevant safety and grid standards (including UK G99/G100 when installed and configured correctly).

Typical Applications

  • Larger domestic PV systems up to 6 kW AC with significant storage capacity for self‑consumption and backup.
  • Homes using Eleven Volta sodium‑ion batteries where cold‑climate performance, longevity and sustainability are key priorities.
  • Projects requiring smart tariff optimisation, export limiting and fine control via the Eleven Energy app and cloud platform.

Product Information

Shipping & Returns

Description

Eleven Energy North Sea EL6000 6kW Hybrid Inverter – Single Phase is a smart, high‑efficiency 6kW hybrid inverter optimised specifically for Eleven’s sodium‑ion battery chemistry. Using Silicon Carbide (SiC) power electronics, it delivers higher efficiency, reduced losses and a longer service life, making it a reliable workhorse for larger domestic PV and storage systems.

Key Features

  • 6kW single-phase hybrid inverter – provides 6,000 W nominal AC output at 230 V for larger domestic loads and higher PV capacities.
  • Optimised for sodium-ion batteries – purpose-built to maximise performance and lifetime of Eleven Volta sodium-ion batteries, with matched voltage and control profiles.
  • Silicon Carbide technology – SiC-based power stage for higher efficiency, cooler operation and extended lifespan compared with conventional silicon inverters.
  • High PV input power – supports up to around 9 kWp of PV input, allowing generous array oversizing and flexible roof layouts.
  • High charge / discharge rate – battery charge/discharge current up to 100 A, enabling up to 6 kW of rapid energy transfer between batteries and loads.
  • Backup power with fast switchover – integrated EPS (emergency power supply) output with sub‑10 ms on/off‑grid switchover for supported backup circuits.
  • Smart tariff compatible – supports intelligent work modes for off‑peak charging, export limiting and smart‑home style energy optimisation.
  • Easy commissioning – simple setup and monitoring through the Eleven Energy app, giving fine-grained control over system behaviour.

PV Input (DC)

  • Max. DC input power: 9 kWp.
  • Max. input voltage: 600 V DC.
  • Starting voltage: 95 V DC.
  • MPPT voltage range: 80–550 V DC, with a full‑load MPPT window optimised in the mid‑voltage range.
  • Number of MPPTs: dual independent trackers for flexible string design.

AC Output (On‑Grid)

  • Nominal output power: 6 kW.
  • Nominal grid voltage: 230 V single phase.
  • Nominal frequency: 50 Hz.
  • Max. output current: 27.2 A.
  • Grid voltage range: 184–276 V.
  • Frequency range: 45–65 Hz.
  • Power factor: close to 1, adjustable from 0.8 leading to 0.8 lagging.
  • THDi: < 3% at rated power.

Battery Interface & Backup

  • Battery type: Eleven sodium-ion battery system (Volta modules).
  • Max. charge / discharge current: up to 100 A.
  • Charge / discharge power: up to 6 kW.
  • Battery charging / discharging efficiency: around 95% at the inverter stage.
  • EPS output: dedicated backup output capable of supplying up to 6 kW to critical loads during grid failure (subject to sufficient battery capacity).
  • Switchover time: < 10 ms between on‑grid and backup operation for supported circuits.

General & Mechanical Data

  • AC connection: single phase.
  • PV max. efficiency: up to 98%.
  • Standby power loss: ≤ 10 W.
  • Dimensions (W × H × D): 500 × 470 × 180 mm.
  • Weight: approximately 23 kg.
  • Noise emission: < 25 dB (natural convection cooling, no active fan).
  • Operating temperature range: -25°C to +60°C.
  • Humidity range: 0–100% (non‑condensing).
  • Cooling method: natural cooling (fanless) for quiet, low‑maintenance operation.
  • IP rating: IP65, suitable for indoor or outdoor installation (with appropriate shielding where required).

Monitoring, Communications & Protection

  • Monitoring: on‑unit LED indicators plus app-based monitoring through Eleven’s UK‑hosted cloud platform.
  • Communications: RS485, CAN and parallel ports for integration with batteries, meters and multi‑inverter systems.
  • Built‑in protections: DC isolator, PV insulation resistance monitoring, residual current protection, anti‑islanding, over/under‑voltage, over‑current and surge protection.
  • Compliance: designed to meet relevant safety and grid standards (including UK G99/G100 when installed and configured correctly).

Typical Applications

  • Larger domestic PV systems up to 6 kW AC with significant storage capacity for self‑consumption and backup.
  • Homes using Eleven Volta sodium‑ion batteries where cold‑climate performance, longevity and sustainability are key priorities.
  • Projects requiring smart tariff optimisation, export limiting and fine control via the Eleven Energy app and cloud platform.