✨ New Arrivals Just Dropped!Explore
VEGA Chargers ALOHA Lander Plus 240kW DC Fast Charger – Dual CCS2 + AC Type 2 EV Charging Station
HomeStore

VEGA Chargers ALOHA Lander Plus 240kW DC Fast Charger – Dual CCS2 + AC Type 2 EV Charging Station

VEGA Chargers ALOHA Lander Plus 240kW DC Fast Charger – Dual CCS2 + AC Type 2 EV Charging Station

240 kW DC OutputBoost Mode 500 AAC 22 kW Included3 Vehicles SimultaneouslyIP55 / IK10CE CertifiedOCPP 1.6J4G + RFID Std.

The VEGA Chargers ALOHA Lander Plus 240 kW (D) + AC represents the flagship of the ALOHA Lander Plus range, delivering 240 kW of DC output power and an extraordinary 400 km of range in just 15 minutes. With two CCS-2 DC connectors (250 A standard / 500 A boost) and an integrated 22 kW AC Type 2 socket, it simultaneously serves up to three vehicles through intelligent Dynamic Load Management. Built for motorway service areas, high-volume mobility hubs and major fleet depots, it combines industrial-grade IP55 / IK10 stainless steel construction with the convenience of standard 15.6" touchscreen, RFID, 4G modem, OCPP 1.6J and HMI customisable branding.

Range Performance
Up to 400 km in 15 minutes of connection (based on WLTP 15 kWh/100 km average).
Typical session: 4 – 15 minutes typical session
Key Features
240 kW Peak DC Power
Full 240 kW delivered to a single vehicle, or split to 2 × 120 kW simultaneously — ultra-fast charge times of just 4 to 15 minutes for compatible vehicles.
Dual CCS-2 with 500 A Boost
250 A standard / 500 A in Boost mode per DC port — the highest output current in the ALOHA Lander Plus range, maximising charge acceptance for next-generation high-power EVs.
Integrated 22 kW AC Output
Independent Type 2 AC socket at 22 kW / 32 A enables a third vehicle to charge simultaneously alongside both DC sessions, maximising site revenue per unit.
Dynamic Load Management
Automatic, real-time power sharing across DC and AC outputs — grid-aware and self-managing with no operator intervention.
Smart Charging & Autocharge
OCPP 1.6J cloud management with ISO 15118 Plug & Charge — fully automated sessions from connection to completion, supporting public access and fleet Autocharge deployments.
15.6" TFT Touchscreen & RFID
Large-format colour touchscreen and RFID reader included as standard, with HMI customisable logos for operator and white-label branding.
Advanced Electrical Protection
Dehn 20 kA 4-pole surge protection, MCB curve C per output, RCD 30 mA Type A, and DC isolation monitoring with protection fuse — comprehensive protection at the highest power levels.
Industrial Installation Engineering
Ground-mounted on anchor bolt or structural foundation; positioned by forklift or upper eyebolts — engineered for safe delivery and commissioning at large-scale charging sites.
Typical Applications
Service Stations & Motorway Hubs
Corporate Fleet Depots
Malls & Supermarkets
Public & Private Car Parks
Office Buildings & Workplaces
Service Vehicles & Public Transport
Technical Specifications
AC INPUT
Supply Voltage 400 Vac ± 10% (3P+N+PE)
Frequency 50 / 60 Hz
Nominal Input Current 404 A (with AC output)
Apparent Power 280 kVA (with AC output)
Power Factor > 0.99
Efficiency > 95% at nominal power
THDi < 5%
Standby Consumption < 60 W
Earthing System TT / TN-S
DC OUTPUT
Max. Output Power 240 kW single / 2 × 120 kW simultaneous
Max. Output Current 250 A (500 A Boost*) / 2 × (250 A / 400 A* Boost) simultaneous
Output Voltage Range 150 – 1000 Vdc
DC Connectors CCS-2 + CCS-2 (4 m cables; optional 5 or 7 m)
Metering DC Official meter certified (optional)
AC OUTPUT
Max. AC Output Power 22 kW
AC Output Voltage 400 / 230 Vac ± 10% (3P+N+PE)
Max. AC Output Current 32 A
AC Connector Type 2 (Socket)
Metering AC Official meter certified (standard)
MECHANICAL
Dimensions (H × W × D) 2000 mm × 900 mm × 450 mm
Weight 475 kg
Mechanical Impact Protection IK10
Housing Material Stainless steel and PUR (V0) — customisable colour
Installation Method Ground mount — anchor bolt or structural foundation; forklift / eyebolt unloading
ENVIRONMENT
Ingress Protection IP55
Operating Temperature -10°C to +55°C (-30°C to +55°C with optional heater)
Storage Temperature -35°C to +70°C
Relative Humidity 5% to 95% non-condensing
Cooling System Exhaust fan
Noise Level ≤ 60 dBA (1 m, all directions)
Max. Altitude 2000 m
GENERAL
User Interface 15.6" TFT colour touchscreen (standard)
Communication Protocol OCPP 1.6J; Modbus TCP; Modbus RTU
Communication Interface 4G (standard); RS485; Ethernet
Access & ID RFID reader (standard) — MIFARE Classic / DESfire EV1, EV2; NFC Type 4; Autocharge; PIN code; White list
HMI Branding Customisable logos (standard)
Payment Terminal Cashless payment terminal (optional)
Status Lights RGB LED per charging connector
STANDARDS & CERTIFICATIONS
IEC / DIN / ISO IEC 61851-1/21-2/23/24; IEC 62196-1/2/3; IEC 61000; DIN70121; ISO 15118-2/-3; CHAdeMO 1.2
EU Directives LVD 2014/35/EU; EMC 2014/30/EU; RED 2014/53/EU
Mark CE
ℹ Installation Note: This product requires installation by a qualified electrician. Ensure supply capacity, earthing system and protection devices comply with local wiring regulations and the technical specification above. Contact your distributor for a pre-installation site assessment.
Frequently Asked Questions
What vehicles can benefit from 500 A Boost mode?
High-capacity EVs rated for ultra-high charge rates can take full advantage of Boost mode — activated automatically under specific temperature and time conditions — with up to 500 A per DC output to fully exploit the vehicle's charge acceptance rate.
How does simultaneous 240 kW charging work with two vehicles?
When both DC connectors are in use simultaneously, Dynamic Load Management splits the 240 kW total to 2 × 120 kW — each vehicle still receiving high-power fast charging. The AC Type 2 socket runs independently at up to 22 kW alongside both DC sessions.
What grid infrastructure is required?
This unit draws up to 404 A nominal input current (3P+N+PE, 400 Vac) with AC output active. A dedicated three-phase supply and appropriate protection gear must be confirmed with your Distribution Network Operator (DNO) and a qualified electrician before installation.
Is this unit suitable for outdoor motorway service areas?
Yes. IP55 ingress protection, IK10 mechanical impact rating, -10°C to +55°C operating range (extendable to -30°C with optional heater), and 2000 m altitude rating combine to make it suitable for demanding outdoor environments across the UK and Europe.
Can multiple units be networked for a larger charging hub?
Yes. OCPP 1.6J enables multiple units to be managed from a single charge-point management platform, with Modbus TCP/RTU available for integration into site energy management. Contact us for multi-unit site design support.
Related Products
ALOHA Lander Plus 160 kW (D)+AC
SKU: VG94L16
ALOHA Lander Plus 120 kW (D)+AC
SKU: VG94L12
$32,316.29

Original: $92,332.27

-65%
VEGA Chargers ALOHA Lander Plus 240kW DC Fast Charger – Dual CCS2 + AC Type 2 EV Charging Station—

$92,332.27

$32,316.29

More Images

VEGA Chargers ALOHA Lander Plus 240kW DC Fast Charger – Dual CCS2 + AC Type 2 EV Charging Station - Image 2
VEGA Chargers ALOHA Lander Plus 240kW DC Fast Charger – Dual CCS2 + AC Type 2 EV Charging Station - Image 3
VEGA Chargers ALOHA Lander Plus 240kW DC Fast Charger – Dual CCS2 + AC Type 2 EV Charging Station - Image 4
VEGA Chargers ALOHA Lander Plus 240kW DC Fast Charger – Dual CCS2 + AC Type 2 EV Charging Station - Image 5
VEGA Chargers ALOHA Lander Plus 240kW DC Fast Charger – Dual CCS2 + AC Type 2 EV Charging Station - Image 6
VEGA Chargers ALOHA Lander Plus 240kW DC Fast Charger – Dual CCS2 + AC Type 2 EV Charging Station - Image 7

VEGA Chargers ALOHA Lander Plus 240kW DC Fast Charger – Dual CCS2 + AC Type 2 EV Charging Station

240 kW DC OutputBoost Mode 500 AAC 22 kW Included3 Vehicles SimultaneouslyIP55 / IK10CE CertifiedOCPP 1.6J4G + RFID Std.

The VEGA Chargers ALOHA Lander Plus 240 kW (D) + AC represents the flagship of the ALOHA Lander Plus range, delivering 240 kW of DC output power and an extraordinary 400 km of range in just 15 minutes. With two CCS-2 DC connectors (250 A standard / 500 A boost) and an integrated 22 kW AC Type 2 socket, it simultaneously serves up to three vehicles through intelligent Dynamic Load Management. Built for motorway service areas, high-volume mobility hubs and major fleet depots, it combines industrial-grade IP55 / IK10 stainless steel construction with the convenience of standard 15.6" touchscreen, RFID, 4G modem, OCPP 1.6J and HMI customisable branding.

Range Performance
Up to 400 km in 15 minutes of connection (based on WLTP 15 kWh/100 km average).
Typical session: 4 – 15 minutes typical session
Key Features
240 kW Peak DC Power
Full 240 kW delivered to a single vehicle, or split to 2 × 120 kW simultaneously — ultra-fast charge times of just 4 to 15 minutes for compatible vehicles.
Dual CCS-2 with 500 A Boost
250 A standard / 500 A in Boost mode per DC port — the highest output current in the ALOHA Lander Plus range, maximising charge acceptance for next-generation high-power EVs.
Integrated 22 kW AC Output
Independent Type 2 AC socket at 22 kW / 32 A enables a third vehicle to charge simultaneously alongside both DC sessions, maximising site revenue per unit.
Dynamic Load Management
Automatic, real-time power sharing across DC and AC outputs — grid-aware and self-managing with no operator intervention.
Smart Charging & Autocharge
OCPP 1.6J cloud management with ISO 15118 Plug & Charge — fully automated sessions from connection to completion, supporting public access and fleet Autocharge deployments.
15.6" TFT Touchscreen & RFID
Large-format colour touchscreen and RFID reader included as standard, with HMI customisable logos for operator and white-label branding.
Advanced Electrical Protection
Dehn 20 kA 4-pole surge protection, MCB curve C per output, RCD 30 mA Type A, and DC isolation monitoring with protection fuse — comprehensive protection at the highest power levels.
Industrial Installation Engineering
Ground-mounted on anchor bolt or structural foundation; positioned by forklift or upper eyebolts — engineered for safe delivery and commissioning at large-scale charging sites.
Typical Applications
Service Stations & Motorway Hubs
Corporate Fleet Depots
Malls & Supermarkets
Public & Private Car Parks
Office Buildings & Workplaces
Service Vehicles & Public Transport
Technical Specifications
AC INPUT
Supply Voltage 400 Vac ± 10% (3P+N+PE)
Frequency 50 / 60 Hz
Nominal Input Current 404 A (with AC output)
Apparent Power 280 kVA (with AC output)
Power Factor > 0.99
Efficiency > 95% at nominal power
THDi < 5%
Standby Consumption < 60 W
Earthing System TT / TN-S
DC OUTPUT
Max. Output Power 240 kW single / 2 × 120 kW simultaneous
Max. Output Current 250 A (500 A Boost*) / 2 × (250 A / 400 A* Boost) simultaneous
Output Voltage Range 150 – 1000 Vdc
DC Connectors CCS-2 + CCS-2 (4 m cables; optional 5 or 7 m)
Metering DC Official meter certified (optional)
AC OUTPUT
Max. AC Output Power 22 kW
AC Output Voltage 400 / 230 Vac ± 10% (3P+N+PE)
Max. AC Output Current 32 A
AC Connector Type 2 (Socket)
Metering AC Official meter certified (standard)
MECHANICAL
Dimensions (H × W × D) 2000 mm × 900 mm × 450 mm
Weight 475 kg
Mechanical Impact Protection IK10
Housing Material Stainless steel and PUR (V0) — customisable colour
Installation Method Ground mount — anchor bolt or structural foundation; forklift / eyebolt unloading
ENVIRONMENT
Ingress Protection IP55
Operating Temperature -10°C to +55°C (-30°C to +55°C with optional heater)
Storage Temperature -35°C to +70°C
Relative Humidity 5% to 95% non-condensing
Cooling System Exhaust fan
Noise Level ≤ 60 dBA (1 m, all directions)
Max. Altitude 2000 m
GENERAL
User Interface 15.6" TFT colour touchscreen (standard)
Communication Protocol OCPP 1.6J; Modbus TCP; Modbus RTU
Communication Interface 4G (standard); RS485; Ethernet
Access & ID RFID reader (standard) — MIFARE Classic / DESfire EV1, EV2; NFC Type 4; Autocharge; PIN code; White list
HMI Branding Customisable logos (standard)
Payment Terminal Cashless payment terminal (optional)
Status Lights RGB LED per charging connector
STANDARDS & CERTIFICATIONS
IEC / DIN / ISO IEC 61851-1/21-2/23/24; IEC 62196-1/2/3; IEC 61000; DIN70121; ISO 15118-2/-3; CHAdeMO 1.2
EU Directives LVD 2014/35/EU; EMC 2014/30/EU; RED 2014/53/EU
Mark CE
ℹ Installation Note: This product requires installation by a qualified electrician. Ensure supply capacity, earthing system and protection devices comply with local wiring regulations and the technical specification above. Contact your distributor for a pre-installation site assessment.
Frequently Asked Questions
What vehicles can benefit from 500 A Boost mode?
High-capacity EVs rated for ultra-high charge rates can take full advantage of Boost mode — activated automatically under specific temperature and time conditions — with up to 500 A per DC output to fully exploit the vehicle's charge acceptance rate.
How does simultaneous 240 kW charging work with two vehicles?
When both DC connectors are in use simultaneously, Dynamic Load Management splits the 240 kW total to 2 × 120 kW — each vehicle still receiving high-power fast charging. The AC Type 2 socket runs independently at up to 22 kW alongside both DC sessions.
What grid infrastructure is required?
This unit draws up to 404 A nominal input current (3P+N+PE, 400 Vac) with AC output active. A dedicated three-phase supply and appropriate protection gear must be confirmed with your Distribution Network Operator (DNO) and a qualified electrician before installation.
Is this unit suitable for outdoor motorway service areas?
Yes. IP55 ingress protection, IK10 mechanical impact rating, -10°C to +55°C operating range (extendable to -30°C with optional heater), and 2000 m altitude rating combine to make it suitable for demanding outdoor environments across the UK and Europe.
Can multiple units be networked for a larger charging hub?
Yes. OCPP 1.6J enables multiple units to be managed from a single charge-point management platform, with Modbus TCP/RTU available for integration into site energy management. Contact us for multi-unit site design support.
Related Products
ALOHA Lander Plus 160 kW (D)+AC
SKU: VG94L16
ALOHA Lander Plus 120 kW (D)+AC
SKU: VG94L12

Product Information

Shipping & Returns

Description

240 kW DC OutputBoost Mode 500 AAC 22 kW Included3 Vehicles SimultaneouslyIP55 / IK10CE CertifiedOCPP 1.6J4G + RFID Std.

The VEGA Chargers ALOHA Lander Plus 240 kW (D) + AC represents the flagship of the ALOHA Lander Plus range, delivering 240 kW of DC output power and an extraordinary 400 km of range in just 15 minutes. With two CCS-2 DC connectors (250 A standard / 500 A boost) and an integrated 22 kW AC Type 2 socket, it simultaneously serves up to three vehicles through intelligent Dynamic Load Management. Built for motorway service areas, high-volume mobility hubs and major fleet depots, it combines industrial-grade IP55 / IK10 stainless steel construction with the convenience of standard 15.6" touchscreen, RFID, 4G modem, OCPP 1.6J and HMI customisable branding.

Range Performance
Up to 400 km in 15 minutes of connection (based on WLTP 15 kWh/100 km average).
Typical session: 4 – 15 minutes typical session
Key Features
240 kW Peak DC Power
Full 240 kW delivered to a single vehicle, or split to 2 × 120 kW simultaneously — ultra-fast charge times of just 4 to 15 minutes for compatible vehicles.
Dual CCS-2 with 500 A Boost
250 A standard / 500 A in Boost mode per DC port — the highest output current in the ALOHA Lander Plus range, maximising charge acceptance for next-generation high-power EVs.
Integrated 22 kW AC Output
Independent Type 2 AC socket at 22 kW / 32 A enables a third vehicle to charge simultaneously alongside both DC sessions, maximising site revenue per unit.
Dynamic Load Management
Automatic, real-time power sharing across DC and AC outputs — grid-aware and self-managing with no operator intervention.
Smart Charging & Autocharge
OCPP 1.6J cloud management with ISO 15118 Plug & Charge — fully automated sessions from connection to completion, supporting public access and fleet Autocharge deployments.
15.6" TFT Touchscreen & RFID
Large-format colour touchscreen and RFID reader included as standard, with HMI customisable logos for operator and white-label branding.
Advanced Electrical Protection
Dehn 20 kA 4-pole surge protection, MCB curve C per output, RCD 30 mA Type A, and DC isolation monitoring with protection fuse — comprehensive protection at the highest power levels.
Industrial Installation Engineering
Ground-mounted on anchor bolt or structural foundation; positioned by forklift or upper eyebolts — engineered for safe delivery and commissioning at large-scale charging sites.
Typical Applications
Service Stations & Motorway Hubs
Corporate Fleet Depots
Malls & Supermarkets
Public & Private Car Parks
Office Buildings & Workplaces
Service Vehicles & Public Transport
Technical Specifications
AC INPUT
Supply Voltage 400 Vac ± 10% (3P+N+PE)
Frequency 50 / 60 Hz
Nominal Input Current 404 A (with AC output)
Apparent Power 280 kVA (with AC output)
Power Factor > 0.99
Efficiency > 95% at nominal power
THDi < 5%
Standby Consumption < 60 W
Earthing System TT / TN-S
DC OUTPUT
Max. Output Power 240 kW single / 2 × 120 kW simultaneous
Max. Output Current 250 A (500 A Boost*) / 2 × (250 A / 400 A* Boost) simultaneous
Output Voltage Range 150 – 1000 Vdc
DC Connectors CCS-2 + CCS-2 (4 m cables; optional 5 or 7 m)
Metering DC Official meter certified (optional)
AC OUTPUT
Max. AC Output Power 22 kW
AC Output Voltage 400 / 230 Vac ± 10% (3P+N+PE)
Max. AC Output Current 32 A
AC Connector Type 2 (Socket)
Metering AC Official meter certified (standard)
MECHANICAL
Dimensions (H × W × D) 2000 mm × 900 mm × 450 mm
Weight 475 kg
Mechanical Impact Protection IK10
Housing Material Stainless steel and PUR (V0) — customisable colour
Installation Method Ground mount — anchor bolt or structural foundation; forklift / eyebolt unloading
ENVIRONMENT
Ingress Protection IP55
Operating Temperature -10°C to +55°C (-30°C to +55°C with optional heater)
Storage Temperature -35°C to +70°C
Relative Humidity 5% to 95% non-condensing
Cooling System Exhaust fan
Noise Level ≤ 60 dBA (1 m, all directions)
Max. Altitude 2000 m
GENERAL
User Interface 15.6" TFT colour touchscreen (standard)
Communication Protocol OCPP 1.6J; Modbus TCP; Modbus RTU
Communication Interface 4G (standard); RS485; Ethernet
Access & ID RFID reader (standard) — MIFARE Classic / DESfire EV1, EV2; NFC Type 4; Autocharge; PIN code; White list
HMI Branding Customisable logos (standard)
Payment Terminal Cashless payment terminal (optional)
Status Lights RGB LED per charging connector
STANDARDS & CERTIFICATIONS
IEC / DIN / ISO IEC 61851-1/21-2/23/24; IEC 62196-1/2/3; IEC 61000; DIN70121; ISO 15118-2/-3; CHAdeMO 1.2
EU Directives LVD 2014/35/EU; EMC 2014/30/EU; RED 2014/53/EU
Mark CE
ℹ Installation Note: This product requires installation by a qualified electrician. Ensure supply capacity, earthing system and protection devices comply with local wiring regulations and the technical specification above. Contact your distributor for a pre-installation site assessment.
Frequently Asked Questions
What vehicles can benefit from 500 A Boost mode?
High-capacity EVs rated for ultra-high charge rates can take full advantage of Boost mode — activated automatically under specific temperature and time conditions — with up to 500 A per DC output to fully exploit the vehicle's charge acceptance rate.
How does simultaneous 240 kW charging work with two vehicles?
When both DC connectors are in use simultaneously, Dynamic Load Management splits the 240 kW total to 2 × 120 kW — each vehicle still receiving high-power fast charging. The AC Type 2 socket runs independently at up to 22 kW alongside both DC sessions.
What grid infrastructure is required?
This unit draws up to 404 A nominal input current (3P+N+PE, 400 Vac) with AC output active. A dedicated three-phase supply and appropriate protection gear must be confirmed with your Distribution Network Operator (DNO) and a qualified electrician before installation.
Is this unit suitable for outdoor motorway service areas?
Yes. IP55 ingress protection, IK10 mechanical impact rating, -10°C to +55°C operating range (extendable to -30°C with optional heater), and 2000 m altitude rating combine to make it suitable for demanding outdoor environments across the UK and Europe.
Can multiple units be networked for a larger charging hub?
Yes. OCPP 1.6J enables multiple units to be managed from a single charge-point management platform, with Modbus TCP/RTU available for integration into site energy management. Contact us for multi-unit site design support.
Related Products
ALOHA Lander Plus 160 kW (D)+AC
SKU: VG94L16
ALOHA Lander Plus 120 kW (D)+AC
SKU: VG94L12