Polypipe Stainless Steel EuroCone UFH Manifold | 2–12 Ports | 15mm Underfloor Heating
Stainless Steel Grade 1.4301 EuroCone Connection 15mm & 12mm Pipe 2–12 Ports Flow Meter Per Port
The Polypipe Stainless Steel EuroCone UFH Manifold is a premium-grade underfloor heating manifold manufactured from grade 1.4301 stainless steel, designed to distribute and regulate hot water flow across multiple UFH circuits from a single connection point. The EuroCone connection system uses G¾" male threads on each port to accept Eurocone adaptors, enabling fast and secure connection of 15mm UFH pipe — or 12mm pipe with the addition of UFH12EC adaptor sets (sold separately). Each port is equipped with an individual flow meter, allowing independent balancing of every circuit for even heat distribution throughout the property.
Available in 11 port configurations from 2 to 12 ports — select the number of ports using the variant selector above to match the exact number of UFH circuits in your system. All variants share identical build quality and features; only the number of ports (and physical length of the manifold body) differs between sizes.
All Variants — Port Count & MPN
Select the number of ports from the dropdown above. Each variant covers one UFH circuit per port. If you have 5 zones/circuits, select 5 Port. The table below lists all available variants and their Polypipe part numbers.
| Ports | Circuits Served | MPN | Notes |
|---|---|---|---|
| 2 Port | 2 circuits | UFH12752EC | Small zones; 1–2 rooms |
| 3 Port | 3 circuits | UFH12753EC | 3 rooms or zones |
| 4 Port | 4 circuits | UFH12754EC | Common for medium floor plates |
| 5 Port | 5 circuits | UFH12755EC | 5 zones |
| 6 Port | 6 circuits | UFH12756EC | 6 zones |
| 7 Port | 7 circuits | UFH12757EC | 7 zones |
| 8 Port | 8 circuits | UFH12758EC | 8 zones; larger homes |
| 9 Port | 9 circuits | UFH12759EC | 9 zones |
| 10 Port | 10 circuits | UFH12760EC | 10 zones; large properties |
| 11 Port | 11 circuits | UFH12761EC | 11 zones; large properties |
| 12 Port | 12 circuits | UFH12762EC | 12 zones; maximum in range |
💡 How Many Ports Do I Need?
You need one port per UFH circuit. A circuit is a continuous loop of pipe covering one zone or area (typically one room, or one section of a large room). If your UFH design calls for 4 loops of pipe across 4 zones, select the 4 Port manifold. Multiple circuits in larger rooms are still counted individually — a room with 2 circuits requires 2 ports. If you are unsure, consult your UFH design plan or contact Polypipe's design team.
Key Features
What's In The Box
| Included | Sold Separately (Required for Installation) |
|---|---|
| Stainless steel manifold body (selected port count) | Isolation valves for supply connections |
| Wall mounting bracket | UFH12EC 12mm EuroCone adaptors (if using 12mm pipe) |
| Drain & air vent assembly (fits either end) | Actuators (for zone valve control via room thermostats) |
| Self-adhesive circuit identification stickers | UFH pipe (15mm or 12mm) |
| Water temperature controller / pump station |
Technical Specifications
| Specification | Detail |
|---|---|
| Material | Stainless steel grade 1.4301 |
| Port thread | G¾" male (EuroCone) |
| Pipe compatibility | 15mm (direct); 12mm (with UFH12EC adaptors) |
| Port counts available | 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 ports |
| Flow meters | Individual on each port — visual balancing |
| Drain & vent | Combined assembly, positions to either end |
| Wall bracket | Included — secure fix type |
| Operating standard | VDI 2035 (heating water specification) |
| Heating medium | Heating water (as per VDI 2035); dirt trap/filter ≤0.8mm mesh recommended if contaminants present |
| Isolation valves | Not included — supplied separately |
| Actuator compatibility | Compatible with Polypipe actuators (sold separately) |
| Brand | Polypipe |
⚠️ Important Installation Notes
Manifolds must be operated using heating water in accordance with VDI 2035. Where the heating water may contain corrosive particles or other contaminants, a dirt trap or filter with a mesh size of no more than 0.8mm must be installed upstream of the manifold. During pressure testing, the return valves must be closed. Isolation valves for the supply end are not included and must be sourced separately — do not omit these. If using 12mm pipe systems (Overlay/Overlay Lite), UFH12EC EuroCone adaptor packs are required (pack of 2 per port — order one pack per port). Actuators are sold separately and are required for zone control with room thermostats.
Frequently Asked Questions
What is a EuroCone connection — how does it differ from push-fit?
EuroCone is a threaded connection system using G¾" male threads on each manifold port. The UFH pipe is connected via a dedicated EuroCone adaptor (either push-fit or compression type depending on the adaptor chosen), which threads onto the manifold port. It is a very secure connection suited to permanent installations, and is the preferred connection method in professional UFH systems. It differs from push-fit in that the adaptor engages with the male thread before the pipe is pushed in — providing a more robust and auditable connection.
Can I use this manifold with 12mm Overlay pipe?
Yes, but you will need to purchase UFH12EC EuroCone adaptor packs separately. Each pack contains 2 adaptors, so you need one pack per port (e.g. a 4-port manifold needs 2 packs of UFH12EC). The adaptors fit onto the G¾" port and convert the connection to accept 12mm pipe as used in the Polypipe Overlay and Overlay Lite systems.
Do I need a larger manifold if I have a larger room?
Not necessarily — the port count is determined by the number of separate pipe circuits, not room size. A single large room may require two or more pipe circuits (and therefore two or more ports) depending on the floor area, pipe spacing, and design heat loss. Conversely, a small room may be served by a single circuit on a single port. Always base port count on your UFH system design plan, not on room count alone.
Why does this manifold not come with isolation valves?
Isolation valves for the supply connections are sold and specified separately because there are different valve types suitable for different installation configurations (e.g. with or without a blending valve unit, with or without a pump). Polypipe supply a range of compatible isolation valve assemblies and pump/blending stations to suit different system designs, and including one type as standard would not suit all installations. Your UFH installer or system designer will specify the correct valve assembly for your configuration.
Can two smaller manifolds be used instead of one large one?
Yes — in larger systems it is common practice to use two manifolds in different locations (e.g. one manifold per floor of a property) rather than running all circuits to a single central manifold. This reduces pipe run lengths and is often more practical. Polypipe also supplies an extension bar (UFHECEXT) to join two manifold bodies together if required.
Original: $178.16
-65%$178.16
$62.36More Images
Polypipe Stainless Steel EuroCone UFH Manifold | 2–12 Ports | 15mm Underfloor Heating
Stainless Steel Grade 1.4301 EuroCone Connection 15mm & 12mm Pipe 2–12 Ports Flow Meter Per Port
The Polypipe Stainless Steel EuroCone UFH Manifold is a premium-grade underfloor heating manifold manufactured from grade 1.4301 stainless steel, designed to distribute and regulate hot water flow across multiple UFH circuits from a single connection point. The EuroCone connection system uses G¾" male threads on each port to accept Eurocone adaptors, enabling fast and secure connection of 15mm UFH pipe — or 12mm pipe with the addition of UFH12EC adaptor sets (sold separately). Each port is equipped with an individual flow meter, allowing independent balancing of every circuit for even heat distribution throughout the property.
Available in 11 port configurations from 2 to 12 ports — select the number of ports using the variant selector above to match the exact number of UFH circuits in your system. All variants share identical build quality and features; only the number of ports (and physical length of the manifold body) differs between sizes.
All Variants — Port Count & MPN
Select the number of ports from the dropdown above. Each variant covers one UFH circuit per port. If you have 5 zones/circuits, select 5 Port. The table below lists all available variants and their Polypipe part numbers.
| Ports | Circuits Served | MPN | Notes |
|---|---|---|---|
| 2 Port | 2 circuits | UFH12752EC | Small zones; 1–2 rooms |
| 3 Port | 3 circuits | UFH12753EC | 3 rooms or zones |
| 4 Port | 4 circuits | UFH12754EC | Common for medium floor plates |
| 5 Port | 5 circuits | UFH12755EC | 5 zones |
| 6 Port | 6 circuits | UFH12756EC | 6 zones |
| 7 Port | 7 circuits | UFH12757EC | 7 zones |
| 8 Port | 8 circuits | UFH12758EC | 8 zones; larger homes |
| 9 Port | 9 circuits | UFH12759EC | 9 zones |
| 10 Port | 10 circuits | UFH12760EC | 10 zones; large properties |
| 11 Port | 11 circuits | UFH12761EC | 11 zones; large properties |
| 12 Port | 12 circuits | UFH12762EC | 12 zones; maximum in range |
💡 How Many Ports Do I Need?
You need one port per UFH circuit. A circuit is a continuous loop of pipe covering one zone or area (typically one room, or one section of a large room). If your UFH design calls for 4 loops of pipe across 4 zones, select the 4 Port manifold. Multiple circuits in larger rooms are still counted individually — a room with 2 circuits requires 2 ports. If you are unsure, consult your UFH design plan or contact Polypipe's design team.
Key Features
What's In The Box
| Included | Sold Separately (Required for Installation) |
|---|---|
| Stainless steel manifold body (selected port count) | Isolation valves for supply connections |
| Wall mounting bracket | UFH12EC 12mm EuroCone adaptors (if using 12mm pipe) |
| Drain & air vent assembly (fits either end) | Actuators (for zone valve control via room thermostats) |
| Self-adhesive circuit identification stickers | UFH pipe (15mm or 12mm) |
| Water temperature controller / pump station |
Technical Specifications
| Specification | Detail |
|---|---|
| Material | Stainless steel grade 1.4301 |
| Port thread | G¾" male (EuroCone) |
| Pipe compatibility | 15mm (direct); 12mm (with UFH12EC adaptors) |
| Port counts available | 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 ports |
| Flow meters | Individual on each port — visual balancing |
| Drain & vent | Combined assembly, positions to either end |
| Wall bracket | Included — secure fix type |
| Operating standard | VDI 2035 (heating water specification) |
| Heating medium | Heating water (as per VDI 2035); dirt trap/filter ≤0.8mm mesh recommended if contaminants present |
| Isolation valves | Not included — supplied separately |
| Actuator compatibility | Compatible with Polypipe actuators (sold separately) |
| Brand | Polypipe |
⚠️ Important Installation Notes
Manifolds must be operated using heating water in accordance with VDI 2035. Where the heating water may contain corrosive particles or other contaminants, a dirt trap or filter with a mesh size of no more than 0.8mm must be installed upstream of the manifold. During pressure testing, the return valves must be closed. Isolation valves for the supply end are not included and must be sourced separately — do not omit these. If using 12mm pipe systems (Overlay/Overlay Lite), UFH12EC EuroCone adaptor packs are required (pack of 2 per port — order one pack per port). Actuators are sold separately and are required for zone control with room thermostats.
Frequently Asked Questions
What is a EuroCone connection — how does it differ from push-fit?
EuroCone is a threaded connection system using G¾" male threads on each manifold port. The UFH pipe is connected via a dedicated EuroCone adaptor (either push-fit or compression type depending on the adaptor chosen), which threads onto the manifold port. It is a very secure connection suited to permanent installations, and is the preferred connection method in professional UFH systems. It differs from push-fit in that the adaptor engages with the male thread before the pipe is pushed in — providing a more robust and auditable connection.
Can I use this manifold with 12mm Overlay pipe?
Yes, but you will need to purchase UFH12EC EuroCone adaptor packs separately. Each pack contains 2 adaptors, so you need one pack per port (e.g. a 4-port manifold needs 2 packs of UFH12EC). The adaptors fit onto the G¾" port and convert the connection to accept 12mm pipe as used in the Polypipe Overlay and Overlay Lite systems.
Do I need a larger manifold if I have a larger room?
Not necessarily — the port count is determined by the number of separate pipe circuits, not room size. A single large room may require two or more pipe circuits (and therefore two or more ports) depending on the floor area, pipe spacing, and design heat loss. Conversely, a small room may be served by a single circuit on a single port. Always base port count on your UFH system design plan, not on room count alone.
Why does this manifold not come with isolation valves?
Isolation valves for the supply connections are sold and specified separately because there are different valve types suitable for different installation configurations (e.g. with or without a blending valve unit, with or without a pump). Polypipe supply a range of compatible isolation valve assemblies and pump/blending stations to suit different system designs, and including one type as standard would not suit all installations. Your UFH installer or system designer will specify the correct valve assembly for your configuration.
Can two smaller manifolds be used instead of one large one?
Yes — in larger systems it is common practice to use two manifolds in different locations (e.g. one manifold per floor of a property) rather than running all circuits to a single central manifold. This reduces pipe run lengths and is often more practical. Polypipe also supplies an extension bar (UFHECEXT) to join two manifold bodies together if required.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Stainless Steel Grade 1.4301 EuroCone Connection 15mm & 12mm Pipe 2–12 Ports Flow Meter Per Port
The Polypipe Stainless Steel EuroCone UFH Manifold is a premium-grade underfloor heating manifold manufactured from grade 1.4301 stainless steel, designed to distribute and regulate hot water flow across multiple UFH circuits from a single connection point. The EuroCone connection system uses G¾" male threads on each port to accept Eurocone adaptors, enabling fast and secure connection of 15mm UFH pipe — or 12mm pipe with the addition of UFH12EC adaptor sets (sold separately). Each port is equipped with an individual flow meter, allowing independent balancing of every circuit for even heat distribution throughout the property.
Available in 11 port configurations from 2 to 12 ports — select the number of ports using the variant selector above to match the exact number of UFH circuits in your system. All variants share identical build quality and features; only the number of ports (and physical length of the manifold body) differs between sizes.
All Variants — Port Count & MPN
Select the number of ports from the dropdown above. Each variant covers one UFH circuit per port. If you have 5 zones/circuits, select 5 Port. The table below lists all available variants and their Polypipe part numbers.
| Ports | Circuits Served | MPN | Notes |
|---|---|---|---|
| 2 Port | 2 circuits | UFH12752EC | Small zones; 1–2 rooms |
| 3 Port | 3 circuits | UFH12753EC | 3 rooms or zones |
| 4 Port | 4 circuits | UFH12754EC | Common for medium floor plates |
| 5 Port | 5 circuits | UFH12755EC | 5 zones |
| 6 Port | 6 circuits | UFH12756EC | 6 zones |
| 7 Port | 7 circuits | UFH12757EC | 7 zones |
| 8 Port | 8 circuits | UFH12758EC | 8 zones; larger homes |
| 9 Port | 9 circuits | UFH12759EC | 9 zones |
| 10 Port | 10 circuits | UFH12760EC | 10 zones; large properties |
| 11 Port | 11 circuits | UFH12761EC | 11 zones; large properties |
| 12 Port | 12 circuits | UFH12762EC | 12 zones; maximum in range |
💡 How Many Ports Do I Need?
You need one port per UFH circuit. A circuit is a continuous loop of pipe covering one zone or area (typically one room, or one section of a large room). If your UFH design calls for 4 loops of pipe across 4 zones, select the 4 Port manifold. Multiple circuits in larger rooms are still counted individually — a room with 2 circuits requires 2 ports. If you are unsure, consult your UFH design plan or contact Polypipe's design team.
Key Features
What's In The Box
| Included | Sold Separately (Required for Installation) |
|---|---|
| Stainless steel manifold body (selected port count) | Isolation valves for supply connections |
| Wall mounting bracket | UFH12EC 12mm EuroCone adaptors (if using 12mm pipe) |
| Drain & air vent assembly (fits either end) | Actuators (for zone valve control via room thermostats) |
| Self-adhesive circuit identification stickers | UFH pipe (15mm or 12mm) |
| Water temperature controller / pump station |
Technical Specifications
| Specification | Detail |
|---|---|
| Material | Stainless steel grade 1.4301 |
| Port thread | G¾" male (EuroCone) |
| Pipe compatibility | 15mm (direct); 12mm (with UFH12EC adaptors) |
| Port counts available | 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 ports |
| Flow meters | Individual on each port — visual balancing |
| Drain & vent | Combined assembly, positions to either end |
| Wall bracket | Included — secure fix type |
| Operating standard | VDI 2035 (heating water specification) |
| Heating medium | Heating water (as per VDI 2035); dirt trap/filter ≤0.8mm mesh recommended if contaminants present |
| Isolation valves | Not included — supplied separately |
| Actuator compatibility | Compatible with Polypipe actuators (sold separately) |
| Brand | Polypipe |
⚠️ Important Installation Notes
Manifolds must be operated using heating water in accordance with VDI 2035. Where the heating water may contain corrosive particles or other contaminants, a dirt trap or filter with a mesh size of no more than 0.8mm must be installed upstream of the manifold. During pressure testing, the return valves must be closed. Isolation valves for the supply end are not included and must be sourced separately — do not omit these. If using 12mm pipe systems (Overlay/Overlay Lite), UFH12EC EuroCone adaptor packs are required (pack of 2 per port — order one pack per port). Actuators are sold separately and are required for zone control with room thermostats.
Frequently Asked Questions
What is a EuroCone connection — how does it differ from push-fit?
EuroCone is a threaded connection system using G¾" male threads on each manifold port. The UFH pipe is connected via a dedicated EuroCone adaptor (either push-fit or compression type depending on the adaptor chosen), which threads onto the manifold port. It is a very secure connection suited to permanent installations, and is the preferred connection method in professional UFH systems. It differs from push-fit in that the adaptor engages with the male thread before the pipe is pushed in — providing a more robust and auditable connection.
Can I use this manifold with 12mm Overlay pipe?
Yes, but you will need to purchase UFH12EC EuroCone adaptor packs separately. Each pack contains 2 adaptors, so you need one pack per port (e.g. a 4-port manifold needs 2 packs of UFH12EC). The adaptors fit onto the G¾" port and convert the connection to accept 12mm pipe as used in the Polypipe Overlay and Overlay Lite systems.
Do I need a larger manifold if I have a larger room?
Not necessarily — the port count is determined by the number of separate pipe circuits, not room size. A single large room may require two or more pipe circuits (and therefore two or more ports) depending on the floor area, pipe spacing, and design heat loss. Conversely, a small room may be served by a single circuit on a single port. Always base port count on your UFH system design plan, not on room count alone.
Why does this manifold not come with isolation valves?
Isolation valves for the supply connections are sold and specified separately because there are different valve types suitable for different installation configurations (e.g. with or without a blending valve unit, with or without a pump). Polypipe supply a range of compatible isolation valve assemblies and pump/blending stations to suit different system designs, and including one type as standard would not suit all installations. Your UFH installer or system designer will specify the correct valve assembly for your configuration.
Can two smaller manifolds be used instead of one large one?
Yes — in larger systems it is common practice to use two manifolds in different locations (e.g. one manifold per floor of a property) rather than running all circuits to a single central manifold. This reduces pipe run lengths and is often more practical. Polypipe also supplies an extension bar (UFHECEXT) to join two manifold bodies together if required.
