✨ New Arrivals Just Dropped!Explore
MyEnergi EVSE Test Box Installer Tool for Zappi & AC EV Charge Points HTML
HomeStore

MyEnergi EVSE Test Box Installer Tool for Zappi & AC EV Charge Points HTML

MyEnergi EVSE Test Box Installer Tool for Zappi & AC EV Charge Points HTML

EVSE-TEST-BOX myenergi Installer Tool 3-Phase Test Zappi Compatible EV Simulation

myenergi EVSE Test Box — Professional 3-phase test box for testing Zappi and all AC EV charge points / EVSE | Simulates an electric vehicle in three modes (Disconnected, Connected & Charging) | Selector switch for instant mode selection | Type 1 & Type 2 sockets | Test terminals for RCD & electrical tester | Essential tool for installers & electricians | Portable, robust & easy to use | Ensures safe & compliant EV charger commissioning

✅ The must-have installer tool – quickly test any AC EV charger without needing an actual car

Simulates EV connection & charging at the flick of a switch. Works with Zappi and any other AC EVSE. Includes Type 1 & Type 2 sockets plus test terminals for full electrical verification. Compact, rugged carry case design – perfect for site testing & commissioning.

The myenergi EVSE Test Box is the professional installer’s essential tool for safely and quickly testing any AC electric vehicle charge point, including the myenergi Zappi. It simulates an electric vehicle being connected and charging, allowing you to verify correct operation, RCD function, earth loop impedance and overall performance without needing an actual EV on site.

With a simple selector switch you can instantly choose between three modes: Disconnected (no EV), Connected (EV present but not charging) and Charging (full EV charging simulation). It features both Type 1 and Type 2 sockets plus dedicated test terminals for connecting an electrical tester or RCD tester. The rugged, portable design makes it ideal for field use by electricians and installers. Fully compatible with Zappi and all other AC EVSE products – the fastest and safest way to commission and troubleshoot EV chargers.

What Makes the myenergi EVSE Test Box Special?

  • 3-Phase EV Simulation — Instantly simulates Disconnected, Connected & Charging modes with a single selector switch.
  • Type 1 & Type 2 Sockets — Tests both common EV connector standards in one compact unit.
  • Test Terminals Included — Built-in terminals for RCD, loop impedance & full electrical verification.
  • Works with Zappi & All AC EVSE — Universal compatibility – the official myenergi installer tool.
  • Portable & Rugged Design — Tough carry-case construction – perfect for daily site use.
  • Fast Commissioning — Saves time & eliminates the need to bring an actual EV to every job.
  • Safe & Compliant Testing — Ensures installations meet safety standards before handover.

Key Features

3-Phase SimulationDisconnected / Connected / Charging modes – selector switch controlled.
Type 1 & Type 2 SocketsTests both common EV connector types in one box.
Built-in Test TerminalsConnect RCD tester or multimeter for full electrical verification.
Zappi & Universal CompatibilityWorks with myenergi Zappi and any other AC EV charger/EVSE.
Portable Carry CaseRugged, compact design – easy to transport between jobs.
No EV RequiredSimulates full charging cycle without needing a real electric vehicle.
Installer EssentialFast, safe & professional tool for commissioning & troubleshooting.

Technical Specifications

Specification Value
MPN / SKU EVSE-TEST-BOX
Voltage 3-phase 400V AC
Current Rating Up to 32A per phase (test simulation)
Modes Disconnected / Connected / Charging (selector switch)
Connectors Type 1 & Type 2 sockets
Test Terminals Built-in for RCD & electrical tester
Compatibility Zappi & all AC EVSE / charge points
Dimensions Compact portable case
Weight Lightweight & easy to carry

What's in the Box

✔ 1 × myenergi EVSE Test Box
✔ Type 1 & Type 2 sockets
✔ Test terminals & selector switch
✔ Quick start guide & instructions

✅ Essential tool for professional EV charger installers. Simulates full EV charging cycle for safe & quick commissioning. Works with Zappi and any AC EVSE. Rugged carry-case design for site use. No actual EV required. For full instructions refer to the myenergi Installer Test Box Operation Manual.

Frequently Asked Questions

What does the EVSE Test Box do? It simulates an electric vehicle being connected and charging – allowing you to fully test any AC EV charger without needing a real car on site.
Which chargers can it test? It works with the myenergi Zappi and every other AC EV charge point / EVSE on the market.
What modes can I select? Three modes via the selector switch: Disconnected (no EV), Connected (EV present but not charging), and Charging (full charging simulation).
Does it support 3-phase testing? Yes – it is a full 3-phase test box capable of testing single and three-phase EVSE installations.
Can I use it for RCD testing? Yes – built-in test terminals allow direct connection of an RCD tester or multimeter for full electrical verification.
Is it portable? Yes – supplied in a rugged carry case, lightweight and easy to transport between job sites.
Who should use this test box? Professional EV installers, electricians and commissioning engineers who regularly install and test Zappi or other AC EV chargers.
$145.97

Original: $417.05

-65%
MyEnergi EVSE Test Box Installer Tool for Zappi & AC EV Charge Points HTML—

$417.05

$145.97

More Images

MyEnergi EVSE Test Box Installer Tool for Zappi & AC EV Charge Points HTML - Image 2

MyEnergi EVSE Test Box Installer Tool for Zappi & AC EV Charge Points HTML

EVSE-TEST-BOX myenergi Installer Tool 3-Phase Test Zappi Compatible EV Simulation

myenergi EVSE Test Box — Professional 3-phase test box for testing Zappi and all AC EV charge points / EVSE | Simulates an electric vehicle in three modes (Disconnected, Connected & Charging) | Selector switch for instant mode selection | Type 1 & Type 2 sockets | Test terminals for RCD & electrical tester | Essential tool for installers & electricians | Portable, robust & easy to use | Ensures safe & compliant EV charger commissioning

✅ The must-have installer tool – quickly test any AC EV charger without needing an actual car

Simulates EV connection & charging at the flick of a switch. Works with Zappi and any other AC EVSE. Includes Type 1 & Type 2 sockets plus test terminals for full electrical verification. Compact, rugged carry case design – perfect for site testing & commissioning.

The myenergi EVSE Test Box is the professional installer’s essential tool for safely and quickly testing any AC electric vehicle charge point, including the myenergi Zappi. It simulates an electric vehicle being connected and charging, allowing you to verify correct operation, RCD function, earth loop impedance and overall performance without needing an actual EV on site.

With a simple selector switch you can instantly choose between three modes: Disconnected (no EV), Connected (EV present but not charging) and Charging (full EV charging simulation). It features both Type 1 and Type 2 sockets plus dedicated test terminals for connecting an electrical tester or RCD tester. The rugged, portable design makes it ideal for field use by electricians and installers. Fully compatible with Zappi and all other AC EVSE products – the fastest and safest way to commission and troubleshoot EV chargers.

What Makes the myenergi EVSE Test Box Special?

  • 3-Phase EV Simulation — Instantly simulates Disconnected, Connected & Charging modes with a single selector switch.
  • Type 1 & Type 2 Sockets — Tests both common EV connector standards in one compact unit.
  • Test Terminals Included — Built-in terminals for RCD, loop impedance & full electrical verification.
  • Works with Zappi & All AC EVSE — Universal compatibility – the official myenergi installer tool.
  • Portable & Rugged Design — Tough carry-case construction – perfect for daily site use.
  • Fast Commissioning — Saves time & eliminates the need to bring an actual EV to every job.
  • Safe & Compliant Testing — Ensures installations meet safety standards before handover.

Key Features

3-Phase SimulationDisconnected / Connected / Charging modes – selector switch controlled.
Type 1 & Type 2 SocketsTests both common EV connector types in one box.
Built-in Test TerminalsConnect RCD tester or multimeter for full electrical verification.
Zappi & Universal CompatibilityWorks with myenergi Zappi and any other AC EV charger/EVSE.
Portable Carry CaseRugged, compact design – easy to transport between jobs.
No EV RequiredSimulates full charging cycle without needing a real electric vehicle.
Installer EssentialFast, safe & professional tool for commissioning & troubleshooting.

Technical Specifications

Specification Value
MPN / SKU EVSE-TEST-BOX
Voltage 3-phase 400V AC
Current Rating Up to 32A per phase (test simulation)
Modes Disconnected / Connected / Charging (selector switch)
Connectors Type 1 & Type 2 sockets
Test Terminals Built-in for RCD & electrical tester
Compatibility Zappi & all AC EVSE / charge points
Dimensions Compact portable case
Weight Lightweight & easy to carry

What's in the Box

✔ 1 × myenergi EVSE Test Box
✔ Type 1 & Type 2 sockets
✔ Test terminals & selector switch
✔ Quick start guide & instructions

✅ Essential tool for professional EV charger installers. Simulates full EV charging cycle for safe & quick commissioning. Works with Zappi and any AC EVSE. Rugged carry-case design for site use. No actual EV required. For full instructions refer to the myenergi Installer Test Box Operation Manual.

Frequently Asked Questions

What does the EVSE Test Box do? It simulates an electric vehicle being connected and charging – allowing you to fully test any AC EV charger without needing a real car on site.
Which chargers can it test? It works with the myenergi Zappi and every other AC EV charge point / EVSE on the market.
What modes can I select? Three modes via the selector switch: Disconnected (no EV), Connected (EV present but not charging), and Charging (full charging simulation).
Does it support 3-phase testing? Yes – it is a full 3-phase test box capable of testing single and three-phase EVSE installations.
Can I use it for RCD testing? Yes – built-in test terminals allow direct connection of an RCD tester or multimeter for full electrical verification.
Is it portable? Yes – supplied in a rugged carry case, lightweight and easy to transport between job sites.
Who should use this test box? Professional EV installers, electricians and commissioning engineers who regularly install and test Zappi or other AC EV chargers.

Product Information

Shipping & Returns

Description

EVSE-TEST-BOX myenergi Installer Tool 3-Phase Test Zappi Compatible EV Simulation

myenergi EVSE Test Box — Professional 3-phase test box for testing Zappi and all AC EV charge points / EVSE | Simulates an electric vehicle in three modes (Disconnected, Connected & Charging) | Selector switch for instant mode selection | Type 1 & Type 2 sockets | Test terminals for RCD & electrical tester | Essential tool for installers & electricians | Portable, robust & easy to use | Ensures safe & compliant EV charger commissioning

✅ The must-have installer tool – quickly test any AC EV charger without needing an actual car

Simulates EV connection & charging at the flick of a switch. Works with Zappi and any other AC EVSE. Includes Type 1 & Type 2 sockets plus test terminals for full electrical verification. Compact, rugged carry case design – perfect for site testing & commissioning.

The myenergi EVSE Test Box is the professional installer’s essential tool for safely and quickly testing any AC electric vehicle charge point, including the myenergi Zappi. It simulates an electric vehicle being connected and charging, allowing you to verify correct operation, RCD function, earth loop impedance and overall performance without needing an actual EV on site.

With a simple selector switch you can instantly choose between three modes: Disconnected (no EV), Connected (EV present but not charging) and Charging (full EV charging simulation). It features both Type 1 and Type 2 sockets plus dedicated test terminals for connecting an electrical tester or RCD tester. The rugged, portable design makes it ideal for field use by electricians and installers. Fully compatible with Zappi and all other AC EVSE products – the fastest and safest way to commission and troubleshoot EV chargers.

What Makes the myenergi EVSE Test Box Special?

  • 3-Phase EV Simulation — Instantly simulates Disconnected, Connected & Charging modes with a single selector switch.
  • Type 1 & Type 2 Sockets — Tests both common EV connector standards in one compact unit.
  • Test Terminals Included — Built-in terminals for RCD, loop impedance & full electrical verification.
  • Works with Zappi & All AC EVSE — Universal compatibility – the official myenergi installer tool.
  • Portable & Rugged Design — Tough carry-case construction – perfect for daily site use.
  • Fast Commissioning — Saves time & eliminates the need to bring an actual EV to every job.
  • Safe & Compliant Testing — Ensures installations meet safety standards before handover.

Key Features

3-Phase SimulationDisconnected / Connected / Charging modes – selector switch controlled.
Type 1 & Type 2 SocketsTests both common EV connector types in one box.
Built-in Test TerminalsConnect RCD tester or multimeter for full electrical verification.
Zappi & Universal CompatibilityWorks with myenergi Zappi and any other AC EV charger/EVSE.
Portable Carry CaseRugged, compact design – easy to transport between jobs.
No EV RequiredSimulates full charging cycle without needing a real electric vehicle.
Installer EssentialFast, safe & professional tool for commissioning & troubleshooting.

Technical Specifications

Specification Value
MPN / SKU EVSE-TEST-BOX
Voltage 3-phase 400V AC
Current Rating Up to 32A per phase (test simulation)
Modes Disconnected / Connected / Charging (selector switch)
Connectors Type 1 & Type 2 sockets
Test Terminals Built-in for RCD & electrical tester
Compatibility Zappi & all AC EVSE / charge points
Dimensions Compact portable case
Weight Lightweight & easy to carry

What's in the Box

✔ 1 × myenergi EVSE Test Box
✔ Type 1 & Type 2 sockets
✔ Test terminals & selector switch
✔ Quick start guide & instructions

✅ Essential tool for professional EV charger installers. Simulates full EV charging cycle for safe & quick commissioning. Works with Zappi and any AC EVSE. Rugged carry-case design for site use. No actual EV required. For full instructions refer to the myenergi Installer Test Box Operation Manual.

Frequently Asked Questions

What does the EVSE Test Box do? It simulates an electric vehicle being connected and charging – allowing you to fully test any AC EV charger without needing a real car on site.
Which chargers can it test? It works with the myenergi Zappi and every other AC EV charge point / EVSE on the market.
What modes can I select? Three modes via the selector switch: Disconnected (no EV), Connected (EV present but not charging), and Charging (full charging simulation).
Does it support 3-phase testing? Yes – it is a full 3-phase test box capable of testing single and three-phase EVSE installations.
Can I use it for RCD testing? Yes – built-in test terminals allow direct connection of an RCD tester or multimeter for full electrical verification.
Is it portable? Yes – supplied in a rugged carry case, lightweight and easy to transport between job sites.
Who should use this test box? Professional EV installers, electricians and commissioning engineers who regularly install and test Zappi or other AC EV chargers.