Myenergi Current Transformer (CT Clamp) with 5m Cable 100A 16mm
The myenergi Current Transformer (CT100-16-05) is a 100A split-core CT clamp with a 5-metre cable, designed for use with myenergi devices including the eddi energy diverter, zappi EV charger, and harvi wireless sensor. It clamps non-invasively around the grid import/export cable at the meter board, allowing myenergi devices to measure exactly how much energy is being imported from or exported to the grid — without any interruption to the live circuit.
A current transformer (CT) is a non-invasive sensor that clips around a live cable and measures the current flowing through it by detecting its magnetic field — no need to cut or interrupt the circuit. The myenergi CT produces a small signal voltage proportional to the current, which the connected myenergi device uses to calculate real-time power flow. This tells the device whether your solar system is importing from or exporting to the grid, enabling intelligent diversion or charging decisions.
| Specification | Details |
|---|---|
| Part Number | MYEN-CT100-16-05 |
| Current Rating | 100A |
| Cable Aperture (Core Size) | 16mm |
| Cable Length | 5 metres |
| Type | Split-core (clamp-on, non-invasive) |
| Compatible Devices | myenergi eddi, zappi, harvi |
| Connector | myenergi standard CT connector |
- 1 × 100A split-core CT clamp
- 5m integrated signal cable
- myenergi connector fitted
The CT clamp must be fitted by a qualified electrician. It is clamped around the live grid feed cable at the meter board — typically the tails between the electricity meter and the main consumer unit. The 16mm aperture is sized for standard domestic service cable. If your cable is larger than 16mm cross-section, please check compatibility before ordering. The 5m cable provides sufficient reach for most standard meter board to consumer unit arrangements; for longer distances the optional myenergi harvi wireless sensor transmits CT data without the need for a cable run.
Original: $39.14
-65%$39.14
$13.70More Images
Myenergi Current Transformer (CT Clamp) with 5m Cable 100A 16mm
The myenergi Current Transformer (CT100-16-05) is a 100A split-core CT clamp with a 5-metre cable, designed for use with myenergi devices including the eddi energy diverter, zappi EV charger, and harvi wireless sensor. It clamps non-invasively around the grid import/export cable at the meter board, allowing myenergi devices to measure exactly how much energy is being imported from or exported to the grid — without any interruption to the live circuit.
A current transformer (CT) is a non-invasive sensor that clips around a live cable and measures the current flowing through it by detecting its magnetic field — no need to cut or interrupt the circuit. The myenergi CT produces a small signal voltage proportional to the current, which the connected myenergi device uses to calculate real-time power flow. This tells the device whether your solar system is importing from or exporting to the grid, enabling intelligent diversion or charging decisions.
| Specification | Details |
|---|---|
| Part Number | MYEN-CT100-16-05 |
| Current Rating | 100A |
| Cable Aperture (Core Size) | 16mm |
| Cable Length | 5 metres |
| Type | Split-core (clamp-on, non-invasive) |
| Compatible Devices | myenergi eddi, zappi, harvi |
| Connector | myenergi standard CT connector |
- 1 × 100A split-core CT clamp
- 5m integrated signal cable
- myenergi connector fitted
The CT clamp must be fitted by a qualified electrician. It is clamped around the live grid feed cable at the meter board — typically the tails between the electricity meter and the main consumer unit. The 16mm aperture is sized for standard domestic service cable. If your cable is larger than 16mm cross-section, please check compatibility before ordering. The 5m cable provides sufficient reach for most standard meter board to consumer unit arrangements; for longer distances the optional myenergi harvi wireless sensor transmits CT data without the need for a cable run.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The myenergi Current Transformer (CT100-16-05) is a 100A split-core CT clamp with a 5-metre cable, designed for use with myenergi devices including the eddi energy diverter, zappi EV charger, and harvi wireless sensor. It clamps non-invasively around the grid import/export cable at the meter board, allowing myenergi devices to measure exactly how much energy is being imported from or exported to the grid — without any interruption to the live circuit.
A current transformer (CT) is a non-invasive sensor that clips around a live cable and measures the current flowing through it by detecting its magnetic field — no need to cut or interrupt the circuit. The myenergi CT produces a small signal voltage proportional to the current, which the connected myenergi device uses to calculate real-time power flow. This tells the device whether your solar system is importing from or exporting to the grid, enabling intelligent diversion or charging decisions.
| Specification | Details |
|---|---|
| Part Number | MYEN-CT100-16-05 |
| Current Rating | 100A |
| Cable Aperture (Core Size) | 16mm |
| Cable Length | 5 metres |
| Type | Split-core (clamp-on, non-invasive) |
| Compatible Devices | myenergi eddi, zappi, harvi |
| Connector | myenergi standard CT connector |
- 1 × 100A split-core CT clamp
- 5m integrated signal cable
- myenergi connector fitted
The CT clamp must be fitted by a qualified electrician. It is clamped around the live grid feed cable at the meter board — typically the tails between the electricity meter and the main consumer unit. The 16mm aperture is sized for standard domestic service cable. If your cable is larger than 16mm cross-section, please check compatibility before ordering. The 5m cable provides sufficient reach for most standard meter board to consumer unit arrangements; for longer distances the optional myenergi harvi wireless sensor transmits CT data without the need for a cable run.
