✨ New Arrivals Just Dropped!Explore
Mut Meccanica Tovo 2‑port zone valve 28mm compression
The Mut Meccanica Tovo 2‑port zone valve 28mm compression is a high‑flow motorised zone valve designed for heat pump systems, combining low pressure drop with robust spring‑return operation and an integral microswitch for auxiliary load control.
Key Features
- 28 mm compression connections – direct connection to 28 mm copper pipework with supplied nuts and olives, ideal for larger‑bore heat pump circuits.
- 2‑port zone valve – simple ON/OFF control of flow to a single zone or circuit, commonly used for isolating heating or hot water zones.
- High Kvs 10.0 – very low pressure drop, supporting the high flow rates and low temperature differences required by modern heat pump systems.
- Integral microswitch – built‑in auxiliary switch for controlling secondary loads such as a secondary pump or providing a signal back to a heat pump or controller.
- 12‑month warranty – supplied with a 12‑month manufacturer’s warranty from date of manufacture.
Technical Overview
- Product code: 7.001.02778 (Mut Meccanica SF 2‑port motorised zone valve).
- Valve type: motorised 2‑way zone ball valve with spring return and auxiliary microswitch.
- Flow coefficient: Kvs 10 m³/h at a differential pressure of 1 bar.
- Rated pressure: PN10, suitable for typical sealed heating and heat pump systems.
- Fluid temperature range: suitable for standard heating system operating temperatures within the valve specification.
- Power supply: 230 V a.c. actuator (typical low‑watt motor drive, model dependent).
Applications
- Heat pump zone control – zoning or isolating individual radiator, underfloor or cylinder circuits on high‑flow, low‑temperature systems.
- DHW / heating separation – use as a zone valve to prioritise hot water or specific heating zones when driven from a controller or heat pump relay.
- Auxiliary pump switching – use the microswitch to start a secondary circulation pump or provide an “on” signal when the valve reaches the open position.
Installation Notes
- Install on clean, flushed pipework and follow the marked flow direction on the valve body.
- Wire the actuator and auxiliary microswitch in line with the manufacturer’s wiring diagram and the relevant heat pump or zone control schematics.
- Ensure pipework is adequately supported and the actuator is protected from excessive heat, moisture and condensation.
$147.11
Mut Meccanica Tovo 2‑port zone valve 28mm compression—
$147.11
More Images
Mut Meccanica Tovo 2‑port zone valve 28mm compression
The Mut Meccanica Tovo 2‑port zone valve 28mm compression is a high‑flow motorised zone valve designed for heat pump systems, combining low pressure drop with robust spring‑return operation and an integral microswitch for auxiliary load control.
Key Features
- 28 mm compression connections – direct connection to 28 mm copper pipework with supplied nuts and olives, ideal for larger‑bore heat pump circuits.
- 2‑port zone valve – simple ON/OFF control of flow to a single zone or circuit, commonly used for isolating heating or hot water zones.
- High Kvs 10.0 – very low pressure drop, supporting the high flow rates and low temperature differences required by modern heat pump systems.
- Integral microswitch – built‑in auxiliary switch for controlling secondary loads such as a secondary pump or providing a signal back to a heat pump or controller.
- 12‑month warranty – supplied with a 12‑month manufacturer’s warranty from date of manufacture.
Technical Overview
- Product code: 7.001.02778 (Mut Meccanica SF 2‑port motorised zone valve).
- Valve type: motorised 2‑way zone ball valve with spring return and auxiliary microswitch.
- Flow coefficient: Kvs 10 m³/h at a differential pressure of 1 bar.
- Rated pressure: PN10, suitable for typical sealed heating and heat pump systems.
- Fluid temperature range: suitable for standard heating system operating temperatures within the valve specification.
- Power supply: 230 V a.c. actuator (typical low‑watt motor drive, model dependent).
Applications
- Heat pump zone control – zoning or isolating individual radiator, underfloor or cylinder circuits on high‑flow, low‑temperature systems.
- DHW / heating separation – use as a zone valve to prioritise hot water or specific heating zones when driven from a controller or heat pump relay.
- Auxiliary pump switching – use the microswitch to start a secondary circulation pump or provide an “on” signal when the valve reaches the open position.
Installation Notes
- Install on clean, flushed pipework and follow the marked flow direction on the valve body.
- Wire the actuator and auxiliary microswitch in line with the manufacturer’s wiring diagram and the relevant heat pump or zone control schematics.
- Ensure pipework is adequately supported and the actuator is protected from excessive heat, moisture and condensation.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Mut Meccanica Tovo 2‑port zone valve 28mm compression is a high‑flow motorised zone valve designed for heat pump systems, combining low pressure drop with robust spring‑return operation and an integral microswitch for auxiliary load control.
Key Features
- 28 mm compression connections – direct connection to 28 mm copper pipework with supplied nuts and olives, ideal for larger‑bore heat pump circuits.
- 2‑port zone valve – simple ON/OFF control of flow to a single zone or circuit, commonly used for isolating heating or hot water zones.
- High Kvs 10.0 – very low pressure drop, supporting the high flow rates and low temperature differences required by modern heat pump systems.
- Integral microswitch – built‑in auxiliary switch for controlling secondary loads such as a secondary pump or providing a signal back to a heat pump or controller.
- 12‑month warranty – supplied with a 12‑month manufacturer’s warranty from date of manufacture.
Technical Overview
- Product code: 7.001.02778 (Mut Meccanica SF 2‑port motorised zone valve).
- Valve type: motorised 2‑way zone ball valve with spring return and auxiliary microswitch.
- Flow coefficient: Kvs 10 m³/h at a differential pressure of 1 bar.
- Rated pressure: PN10, suitable for typical sealed heating and heat pump systems.
- Fluid temperature range: suitable for standard heating system operating temperatures within the valve specification.
- Power supply: 230 V a.c. actuator (typical low‑watt motor drive, model dependent).
Applications
- Heat pump zone control – zoning or isolating individual radiator, underfloor or cylinder circuits on high‑flow, low‑temperature systems.
- DHW / heating separation – use as a zone valve to prioritise hot water or specific heating zones when driven from a controller or heat pump relay.
- Auxiliary pump switching – use the microswitch to start a secondary circulation pump or provide an “on” signal when the valve reaches the open position.
Installation Notes
- Install on clean, flushed pipework and follow the marked flow direction on the valve body.
- Wire the actuator and auxiliary microswitch in line with the manufacturer’s wiring diagram and the relevant heat pump or zone control schematics.
- Ensure pipework is adequately supported and the actuator is protected from excessive heat, moisture and condensation.
