✨ New Arrivals Just Dropped!Explore
Growatt ShineWiLan-X2 Intergrated WiFi LAN and Bluetooth Monitoring Device
The Growatt ShineWiLan-X2 is a three-in-one monitoring datalogger combining Wi-Fi, LAN (Ethernet) and Bluetooth in a single unit. It plugs into the USB port of any compatible Growatt inverter and connects the system to the Growatt ShineServer cloud monitoring platform and ShinePhone app (iOS and Android). Choose wired Ethernet for maximum stability, 2.4 GHz Wi-Fi for standard wireless installation, or Bluetooth (BLE 4.2) for local configuration and firmware updates directly from a smartphone. All three interfaces are present simultaneously. Built-in memory stores up to one month of data with automatic retransmission if connectivity is interrupted. IP65 rated. Wi-Fi range up to 50 m, LAN range up to 100 m (Cat5e). Data is sent to ShineServer every 5 minutes. Compatible with Growatt X, XE, XH, MIN, TL3-LV and SPH-UP series inverters equipped with a USB port.
3-in-1
Wi-Fi+LAN+BT
50m
Wi-Fi Range
100m
LAN Range
BLE 4.2
Bluetooth
1 Month
Local Storage
IP65
Protection
ℹ Compatibility: The ShineWiLan-X2 is compatible with the Growatt -X monitoring range only. Verify your inverter model ends in -X, -XH, -XE or is MIN/SPH-UP before ordering.
ℹ Installer Code Policy: Growatt is introducing an Installer Code Policy in UK and Ireland. Installers must register a code on the Growatt monitoring platform before commissioning.
Key Features
Three-in-One: Wi-Fi + LAN + Bluetooth in a Single Dongle
Most Growatt monitoring dongles offer a single connection method. The ShineWiLan-X2 integrates all three: 2.4 GHz Wi-Fi (802.11b/g/n) for wireless connection to a router, Ethernet (LAN) via RJ45 for a stable wired connection up to 100 m using Cat5e cable, and Bluetooth BLE 4.2 for local configuration and firmware upgrade directly from the ShinePhone app without needing network access. A single SKU works for any installation: strong Wi-Fi locations, basements or outbuildings beyond Wi-Fi range, and sites where wired is preferred.
Wi-Fi 2.4 GHzLAN 100mBluetooth BLE 4.2
Plug-and-Play LAN — No Wi-Fi Password Entry Required
Connecting an Ethernet cable between the ShineWiLan-X2 and a router LAN port completes the setup automatically via DHCP. No app pairing, no Wi-Fi password entry, no AP mode setup sequence. This is the simplest and most stable installation path when the inverter is close to a router or network switch.
DHCP auto-configureZero-touch setupMost stable option
Bluetooth Configuration and Firmware Upgrades
The Bluetooth module enables the ShinePhone app to connect directly to the ShineWiLan-X2 over BLE to: configure Wi-Fi credentials (SSID and password), perform over-the-air firmware updates, and check device status. This eliminates the AP mode setup required by earlier dongles, where the phone must temporarily disconnect from its own Wi-Fi.
BLE 4.2Local firmware updateWi-Fi setup via app
One Month Built-In Storage with Auto-Retransmission
Built-in flash memory caches up to one month of data locally. During connectivity interruptions — router outage, ISP issue or server maintenance — data continues to be collected. When connectivity is restored, the device automatically retransmits all missed data to ShineServer with no manual action required and no gaps in monitoring history.
1 month local storageAuto-retransmitNo data gaps
IP65 — Suitable for All Inverter Locations
The IP65 rating provides dust-tight and water-jet protection, making the ShineWiLan-X2 suitable for inverters installed outdoors, in garages, outbuildings and unheated enclosures. Operating range: −30°C to +60°C.
IP65−30°C to +60°C
ShinePhone App and ShineServer — Free Real-Time Monitoring
Data uploads to ShineServer every 5 minutes. The ShinePhone app (iOS and Android) shows real-time power, cumulative yield, fault alerts and historical charts. No subscription fee is charged for standard residential monitoring.
5-min dataShinePhone appFree monitoring
Technical Specifications
| Connectivity | |
| Wi-Fi Standard | 802.11b/g/n — 2.4 GHz |
| Wi-Fi Range | Up to 50 m (clear line of sight) |
| Bluetooth | BLE 4.2 |
| LAN Interface | RJ45 Ethernet |
| LAN Range | Up to 100 m (Cat5e) |
| Wi-Fi Tx Power | 802.11b: 19.5±2 dBm | 802.11g: 14±2 dBm | 802.11n HT20: 18±2 dBm (MCS0), 13±2 dBm (MCS7) |
| Wi-Fi Receiver Sensitivity | CCK 1 Mbps: −90 dBm | CCK 11 Mbps: −85 dBm |
| Data and Communication | |
| Data Interval | 5 minutes (default) |
| Cloud Server | mqtt.growatt.com |
| Protocols | Modbus RTU (inverter) / MQTT (server) |
| Local Storage | Up to 1 month |
| Auto-Retransmission | Yes |
| Configuration | |
| Setup Methods | LAN plug-and-play / Bluetooth via ShinePhone / AP mode (Wi-Fi) |
| Firmware Update | Via Bluetooth (local) or OTA via server |
| Power | |
| Power Supply | Via USB from inverter (5V DC) |
| Physical | |
| Protection Rating | IP65 |
| Operating Temperature | −30°C to +60°C |
| Compatibility | |
| Compatible Inverters | Growatt X, XE, XH, MIN TL-X, TL3-LV, SPH-UP series (USB port required) |
| Not Compatible | Growatt -S series and non-X range inverters |
| App / Portal | ShinePhone (iOS + Android) / ShineServer (en.growatt.com) |
| Certifications | |
| Certifications | CE, RoHS (2011/65/EU, 2015/863) |
| Manufacturer | Growatt New Energy Co., Ltd |
Frequently Asked Questions
Related Products
Growatt ShineLAN-X
Wired-only Ethernet monitoring dongle for Growatt -X inverters
Growatt MIC 1000TL-X (AF)
1kW Growatt inverter with AFCI and integrated DC switch
SolaX Pocket WiFi V3.0
Cloud monitoring dongle for SolaX -X range inverters
Solis S5 Wi-Fi Data Logger (4-Pin)
Dual-band Wi-Fi monitoring for Solis 4G/5G/S5 inverters
$20.31
Original: $58.04
-65%Growatt ShineWiLan-X2 Intergrated WiFi LAN and Bluetooth Monitoring Device—
$58.04
$20.31More Images
Growatt ShineWiLan-X2 Intergrated WiFi LAN and Bluetooth Monitoring Device
The Growatt ShineWiLan-X2 is a three-in-one monitoring datalogger combining Wi-Fi, LAN (Ethernet) and Bluetooth in a single unit. It plugs into the USB port of any compatible Growatt inverter and connects the system to the Growatt ShineServer cloud monitoring platform and ShinePhone app (iOS and Android). Choose wired Ethernet for maximum stability, 2.4 GHz Wi-Fi for standard wireless installation, or Bluetooth (BLE 4.2) for local configuration and firmware updates directly from a smartphone. All three interfaces are present simultaneously. Built-in memory stores up to one month of data with automatic retransmission if connectivity is interrupted. IP65 rated. Wi-Fi range up to 50 m, LAN range up to 100 m (Cat5e). Data is sent to ShineServer every 5 minutes. Compatible with Growatt X, XE, XH, MIN, TL3-LV and SPH-UP series inverters equipped with a USB port.
3-in-1
Wi-Fi+LAN+BT
50m
Wi-Fi Range
100m
LAN Range
BLE 4.2
Bluetooth
1 Month
Local Storage
IP65
Protection
ℹ Compatibility: The ShineWiLan-X2 is compatible with the Growatt -X monitoring range only. Verify your inverter model ends in -X, -XH, -XE or is MIN/SPH-UP before ordering.
ℹ Installer Code Policy: Growatt is introducing an Installer Code Policy in UK and Ireland. Installers must register a code on the Growatt monitoring platform before commissioning.
Key Features
Three-in-One: Wi-Fi + LAN + Bluetooth in a Single Dongle
Most Growatt monitoring dongles offer a single connection method. The ShineWiLan-X2 integrates all three: 2.4 GHz Wi-Fi (802.11b/g/n) for wireless connection to a router, Ethernet (LAN) via RJ45 for a stable wired connection up to 100 m using Cat5e cable, and Bluetooth BLE 4.2 for local configuration and firmware upgrade directly from the ShinePhone app without needing network access. A single SKU works for any installation: strong Wi-Fi locations, basements or outbuildings beyond Wi-Fi range, and sites where wired is preferred.
Wi-Fi 2.4 GHzLAN 100mBluetooth BLE 4.2
Plug-and-Play LAN — No Wi-Fi Password Entry Required
Connecting an Ethernet cable between the ShineWiLan-X2 and a router LAN port completes the setup automatically via DHCP. No app pairing, no Wi-Fi password entry, no AP mode setup sequence. This is the simplest and most stable installation path when the inverter is close to a router or network switch.
DHCP auto-configureZero-touch setupMost stable option
Bluetooth Configuration and Firmware Upgrades
The Bluetooth module enables the ShinePhone app to connect directly to the ShineWiLan-X2 over BLE to: configure Wi-Fi credentials (SSID and password), perform over-the-air firmware updates, and check device status. This eliminates the AP mode setup required by earlier dongles, where the phone must temporarily disconnect from its own Wi-Fi.
BLE 4.2Local firmware updateWi-Fi setup via app
One Month Built-In Storage with Auto-Retransmission
Built-in flash memory caches up to one month of data locally. During connectivity interruptions — router outage, ISP issue or server maintenance — data continues to be collected. When connectivity is restored, the device automatically retransmits all missed data to ShineServer with no manual action required and no gaps in monitoring history.
1 month local storageAuto-retransmitNo data gaps
IP65 — Suitable for All Inverter Locations
The IP65 rating provides dust-tight and water-jet protection, making the ShineWiLan-X2 suitable for inverters installed outdoors, in garages, outbuildings and unheated enclosures. Operating range: −30°C to +60°C.
IP65−30°C to +60°C
ShinePhone App and ShineServer — Free Real-Time Monitoring
Data uploads to ShineServer every 5 minutes. The ShinePhone app (iOS and Android) shows real-time power, cumulative yield, fault alerts and historical charts. No subscription fee is charged for standard residential monitoring.
5-min dataShinePhone appFree monitoring
Technical Specifications
| Connectivity | |
| Wi-Fi Standard | 802.11b/g/n — 2.4 GHz |
| Wi-Fi Range | Up to 50 m (clear line of sight) |
| Bluetooth | BLE 4.2 |
| LAN Interface | RJ45 Ethernet |
| LAN Range | Up to 100 m (Cat5e) |
| Wi-Fi Tx Power | 802.11b: 19.5±2 dBm | 802.11g: 14±2 dBm | 802.11n HT20: 18±2 dBm (MCS0), 13±2 dBm (MCS7) |
| Wi-Fi Receiver Sensitivity | CCK 1 Mbps: −90 dBm | CCK 11 Mbps: −85 dBm |
| Data and Communication | |
| Data Interval | 5 minutes (default) |
| Cloud Server | mqtt.growatt.com |
| Protocols | Modbus RTU (inverter) / MQTT (server) |
| Local Storage | Up to 1 month |
| Auto-Retransmission | Yes |
| Configuration | |
| Setup Methods | LAN plug-and-play / Bluetooth via ShinePhone / AP mode (Wi-Fi) |
| Firmware Update | Via Bluetooth (local) or OTA via server |
| Power | |
| Power Supply | Via USB from inverter (5V DC) |
| Physical | |
| Protection Rating | IP65 |
| Operating Temperature | −30°C to +60°C |
| Compatibility | |
| Compatible Inverters | Growatt X, XE, XH, MIN TL-X, TL3-LV, SPH-UP series (USB port required) |
| Not Compatible | Growatt -S series and non-X range inverters |
| App / Portal | ShinePhone (iOS + Android) / ShineServer (en.growatt.com) |
| Certifications | |
| Certifications | CE, RoHS (2011/65/EU, 2015/863) |
| Manufacturer | Growatt New Energy Co., Ltd |
Frequently Asked Questions
Related Products
Growatt ShineLAN-X
Wired-only Ethernet monitoring dongle for Growatt -X inverters
Growatt MIC 1000TL-X (AF)
1kW Growatt inverter with AFCI and integrated DC switch
SolaX Pocket WiFi V3.0
Cloud monitoring dongle for SolaX -X range inverters
Solis S5 Wi-Fi Data Logger (4-Pin)
Dual-band Wi-Fi monitoring for Solis 4G/5G/S5 inverters
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Growatt ShineWiLan-X2 is a three-in-one monitoring datalogger combining Wi-Fi, LAN (Ethernet) and Bluetooth in a single unit. It plugs into the USB port of any compatible Growatt inverter and connects the system to the Growatt ShineServer cloud monitoring platform and ShinePhone app (iOS and Android). Choose wired Ethernet for maximum stability, 2.4 GHz Wi-Fi for standard wireless installation, or Bluetooth (BLE 4.2) for local configuration and firmware updates directly from a smartphone. All three interfaces are present simultaneously. Built-in memory stores up to one month of data with automatic retransmission if connectivity is interrupted. IP65 rated. Wi-Fi range up to 50 m, LAN range up to 100 m (Cat5e). Data is sent to ShineServer every 5 minutes. Compatible with Growatt X, XE, XH, MIN, TL3-LV and SPH-UP series inverters equipped with a USB port.
3-in-1
Wi-Fi+LAN+BT
50m
Wi-Fi Range
100m
LAN Range
BLE 4.2
Bluetooth
1 Month
Local Storage
IP65
Protection
ℹ Compatibility: The ShineWiLan-X2 is compatible with the Growatt -X monitoring range only. Verify your inverter model ends in -X, -XH, -XE or is MIN/SPH-UP before ordering.
ℹ Installer Code Policy: Growatt is introducing an Installer Code Policy in UK and Ireland. Installers must register a code on the Growatt monitoring platform before commissioning.
Key Features
Three-in-One: Wi-Fi + LAN + Bluetooth in a Single Dongle
Most Growatt monitoring dongles offer a single connection method. The ShineWiLan-X2 integrates all three: 2.4 GHz Wi-Fi (802.11b/g/n) for wireless connection to a router, Ethernet (LAN) via RJ45 for a stable wired connection up to 100 m using Cat5e cable, and Bluetooth BLE 4.2 for local configuration and firmware upgrade directly from the ShinePhone app without needing network access. A single SKU works for any installation: strong Wi-Fi locations, basements or outbuildings beyond Wi-Fi range, and sites where wired is preferred.
Wi-Fi 2.4 GHzLAN 100mBluetooth BLE 4.2
Plug-and-Play LAN — No Wi-Fi Password Entry Required
Connecting an Ethernet cable between the ShineWiLan-X2 and a router LAN port completes the setup automatically via DHCP. No app pairing, no Wi-Fi password entry, no AP mode setup sequence. This is the simplest and most stable installation path when the inverter is close to a router or network switch.
DHCP auto-configureZero-touch setupMost stable option
Bluetooth Configuration and Firmware Upgrades
The Bluetooth module enables the ShinePhone app to connect directly to the ShineWiLan-X2 over BLE to: configure Wi-Fi credentials (SSID and password), perform over-the-air firmware updates, and check device status. This eliminates the AP mode setup required by earlier dongles, where the phone must temporarily disconnect from its own Wi-Fi.
BLE 4.2Local firmware updateWi-Fi setup via app
One Month Built-In Storage with Auto-Retransmission
Built-in flash memory caches up to one month of data locally. During connectivity interruptions — router outage, ISP issue or server maintenance — data continues to be collected. When connectivity is restored, the device automatically retransmits all missed data to ShineServer with no manual action required and no gaps in monitoring history.
1 month local storageAuto-retransmitNo data gaps
IP65 — Suitable for All Inverter Locations
The IP65 rating provides dust-tight and water-jet protection, making the ShineWiLan-X2 suitable for inverters installed outdoors, in garages, outbuildings and unheated enclosures. Operating range: −30°C to +60°C.
IP65−30°C to +60°C
ShinePhone App and ShineServer — Free Real-Time Monitoring
Data uploads to ShineServer every 5 minutes. The ShinePhone app (iOS and Android) shows real-time power, cumulative yield, fault alerts and historical charts. No subscription fee is charged for standard residential monitoring.
5-min dataShinePhone appFree monitoring
Technical Specifications
| Connectivity | |
| Wi-Fi Standard | 802.11b/g/n — 2.4 GHz |
| Wi-Fi Range | Up to 50 m (clear line of sight) |
| Bluetooth | BLE 4.2 |
| LAN Interface | RJ45 Ethernet |
| LAN Range | Up to 100 m (Cat5e) |
| Wi-Fi Tx Power | 802.11b: 19.5±2 dBm | 802.11g: 14±2 dBm | 802.11n HT20: 18±2 dBm (MCS0), 13±2 dBm (MCS7) |
| Wi-Fi Receiver Sensitivity | CCK 1 Mbps: −90 dBm | CCK 11 Mbps: −85 dBm |
| Data and Communication | |
| Data Interval | 5 minutes (default) |
| Cloud Server | mqtt.growatt.com |
| Protocols | Modbus RTU (inverter) / MQTT (server) |
| Local Storage | Up to 1 month |
| Auto-Retransmission | Yes |
| Configuration | |
| Setup Methods | LAN plug-and-play / Bluetooth via ShinePhone / AP mode (Wi-Fi) |
| Firmware Update | Via Bluetooth (local) or OTA via server |
| Power | |
| Power Supply | Via USB from inverter (5V DC) |
| Physical | |
| Protection Rating | IP65 |
| Operating Temperature | −30°C to +60°C |
| Compatibility | |
| Compatible Inverters | Growatt X, XE, XH, MIN TL-X, TL3-LV, SPH-UP series (USB port required) |
| Not Compatible | Growatt -S series and non-X range inverters |
| App / Portal | ShinePhone (iOS + Android) / ShineServer (en.growatt.com) |
| Certifications | |
| Certifications | CE, RoHS (2011/65/EU, 2015/863) |
| Manufacturer | Growatt New Energy Co., Ltd |
Frequently Asked Questions
Related Products
Growatt ShineLAN-X
Wired-only Ethernet monitoring dongle for Growatt -X inverters
Growatt MIC 1000TL-X (AF)
1kW Growatt inverter with AFCI and integrated DC switch
SolaX Pocket WiFi V3.0
Cloud monitoring dongle for SolaX -X range inverters
Solis S5 Wi-Fi Data Logger (4-Pin)
Dual-band Wi-Fi monitoring for Solis 4G/5G/S5 inverters
