Condensate Pro 76mm Grinder Head – Wall Preparation Tool for Condensate Pipe Installation
Condensate Pro | Item Code: CPGRIND | MPN: IG007
The Condensate Pro Grinder Head (IG007) is a 76mm specialist tool designed to quickly grind a flat, 3-inch face on uneven or irregular surfaces – such as rough stonework – where a condensate pipe exits a building. On uneven masonry, the PipeSnug wall fitting included in the Condensate Pro Connection Kit cannot form a tight seal without a flat contact surface. This grinder head solves that problem in seconds, ensuring a clean, secure seal and a professional installation result even on the most challenging wall surfaces.
Key Features
- 76mm diameter – grinds a precise 3-inch flat face, perfectly sized for the PipeSnug in Condensate Pro connection and combo kits.
- Built for uneven surfaces – specifically designed for hard and irregular stonework that prevents a flush seal with standard fittings.
- Saves time on-site – creates the required flat surface quickly, without chasing or chiselling by hand.
- Improves seal quality – a properly prepared surface ensures better adhesion with Bond & Seal and a more durable, weatherproof result.
- Compatible with the Drift Kit – the Grinder Head can be combined with the Condensate Pro Drift Kit (CPDRIFT) via an extension bar for a complete preparation workflow. A free extension bar is available when both tools are purchased from Condensate Pro.
Product Specifications
| Diameter | 76mm (3 inch) |
| Application | Grinding flat face on uneven/irregular masonry for condensate pipe wall sealing |
| Surface Types | Stone, brick, uneven masonry |
| Compatible With | Condensate Pro Drift Kit via extension bar |
| MPN | IG007 |
| Brand | Condensate Pro |
Frequently Asked Questions
Do I need the Grinder Head for every installation?
No. The Grinder Head is specifically for properties with uneven or irregular external wall surfaces – most commonly older properties with stonework. On flat brick or rendered walls it is not required.
How does the Grinder Head attach to a drill?
The Grinder Head can be used standalone in an angle grinder. It can also be combined with the Condensate Pro Drift Kit bar using a free extension bar, available from Condensate Pro when both tools are purchased together.
What sealant should be used after grinding?
Once the surface is ground flat, use Condensate Pro Bond & Seal (CPBS) to create a gasket seal between the PipeSnug and the wall, ensuring a watertight, weatherproof finish.
Original: $149.81
-65%$149.81
$52.43Condensate Pro 76mm Grinder Head – Wall Preparation Tool for Condensate Pipe Installation
Condensate Pro | Item Code: CPGRIND | MPN: IG007
The Condensate Pro Grinder Head (IG007) is a 76mm specialist tool designed to quickly grind a flat, 3-inch face on uneven or irregular surfaces – such as rough stonework – where a condensate pipe exits a building. On uneven masonry, the PipeSnug wall fitting included in the Condensate Pro Connection Kit cannot form a tight seal without a flat contact surface. This grinder head solves that problem in seconds, ensuring a clean, secure seal and a professional installation result even on the most challenging wall surfaces.
Key Features
- 76mm diameter – grinds a precise 3-inch flat face, perfectly sized for the PipeSnug in Condensate Pro connection and combo kits.
- Built for uneven surfaces – specifically designed for hard and irregular stonework that prevents a flush seal with standard fittings.
- Saves time on-site – creates the required flat surface quickly, without chasing or chiselling by hand.
- Improves seal quality – a properly prepared surface ensures better adhesion with Bond & Seal and a more durable, weatherproof result.
- Compatible with the Drift Kit – the Grinder Head can be combined with the Condensate Pro Drift Kit (CPDRIFT) via an extension bar for a complete preparation workflow. A free extension bar is available when both tools are purchased from Condensate Pro.
Product Specifications
| Diameter | 76mm (3 inch) |
| Application | Grinding flat face on uneven/irregular masonry for condensate pipe wall sealing |
| Surface Types | Stone, brick, uneven masonry |
| Compatible With | Condensate Pro Drift Kit via extension bar |
| MPN | IG007 |
| Brand | Condensate Pro |
Frequently Asked Questions
Do I need the Grinder Head for every installation?
No. The Grinder Head is specifically for properties with uneven or irregular external wall surfaces – most commonly older properties with stonework. On flat brick or rendered walls it is not required.
How does the Grinder Head attach to a drill?
The Grinder Head can be used standalone in an angle grinder. It can also be combined with the Condensate Pro Drift Kit bar using a free extension bar, available from Condensate Pro when both tools are purchased together.
What sealant should be used after grinding?
Once the surface is ground flat, use Condensate Pro Bond & Seal (CPBS) to create a gasket seal between the PipeSnug and the wall, ensuring a watertight, weatherproof finish.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Condensate Pro | Item Code: CPGRIND | MPN: IG007
The Condensate Pro Grinder Head (IG007) is a 76mm specialist tool designed to quickly grind a flat, 3-inch face on uneven or irregular surfaces – such as rough stonework – where a condensate pipe exits a building. On uneven masonry, the PipeSnug wall fitting included in the Condensate Pro Connection Kit cannot form a tight seal without a flat contact surface. This grinder head solves that problem in seconds, ensuring a clean, secure seal and a professional installation result even on the most challenging wall surfaces.
Key Features
- 76mm diameter – grinds a precise 3-inch flat face, perfectly sized for the PipeSnug in Condensate Pro connection and combo kits.
- Built for uneven surfaces – specifically designed for hard and irregular stonework that prevents a flush seal with standard fittings.
- Saves time on-site – creates the required flat surface quickly, without chasing or chiselling by hand.
- Improves seal quality – a properly prepared surface ensures better adhesion with Bond & Seal and a more durable, weatherproof result.
- Compatible with the Drift Kit – the Grinder Head can be combined with the Condensate Pro Drift Kit (CPDRIFT) via an extension bar for a complete preparation workflow. A free extension bar is available when both tools are purchased from Condensate Pro.
Product Specifications
| Diameter | 76mm (3 inch) |
| Application | Grinding flat face on uneven/irregular masonry for condensate pipe wall sealing |
| Surface Types | Stone, brick, uneven masonry |
| Compatible With | Condensate Pro Drift Kit via extension bar |
| MPN | IG007 |
| Brand | Condensate Pro |
Frequently Asked Questions
Do I need the Grinder Head for every installation?
No. The Grinder Head is specifically for properties with uneven or irregular external wall surfaces – most commonly older properties with stonework. On flat brick or rendered walls it is not required.
How does the Grinder Head attach to a drill?
The Grinder Head can be used standalone in an angle grinder. It can also be combined with the Condensate Pro Drift Kit bar using a free extension bar, available from Condensate Pro when both tools are purchased together.
What sealant should be used after grinding?
Once the surface is ground flat, use Condensate Pro Bond & Seal (CPBS) to create a gasket seal between the PipeSnug and the wall, ensuring a watertight, weatherproof finish.
