Condensate Pro Maintenance Coat 250ml – Water-Based UV Protective Coating for Condensate & Primary Pro Insulation
Condensate Pro Maintenance Coat 250ml – Water-Based UV Protective Coating for Condensate & Primary Pro Insulation
Condensate Pro | Item Code: CPMC | MPN: IG005
Condensate Pro Maintenance Coat (IG005) is a water-based protective coating formulated to maintain and extend the life of Condensate Pro and Primary Pro pipe insulation. Supplied in a convenient 250ml tin, it replenishes the UV-resistant and weatherproof coating on the insulation surface, keeping it fully protected against outdoor exposure throughout the life of the boiler or heat pump. Ideal for use at annual service visits or whenever the surface coating shows signs of wear.
Key Features
- UV & weather protection – restores the protective coating on insulation to maintain its outdoor durability and UV resistance.
- Water-based formula – easy to apply with a brush and simple to clean up with water; no solvents required.
- Can be applied over Bond & Seal – the coat can be applied directly over cured Condensate Pro Bond & Seal for comprehensive surface protection.
- Suitable for maintenance & touch-ups – ideal for covering areas disturbed by brick dust during installation, or for periodic recoating during annual service checks.
- Works on both systems – compatible with Condensate Pro and Primary Pro insulation.
- Compliant – meets BS installation standards for condensate pipe insulation maintenance.
Product Specifications
| Volume | 250ml |
| Packaging | Tin |
| Formula | Water-based |
| Application Method | Brush (brush cleans with water) |
| Suitable For | Condensate Pro & Primary Pro insulation; application over Bond & Seal |
| Colour | Black |
| MPN | IG005 |
| Brand | Condensate Pro |
Frequently Asked Questions
When should I use Maintenance Coat?
Maintenance Coat should be applied during annual boiler or heat pump service visits to check and refresh the insulation surface. It is also useful for touching up areas disturbed during installation, such as sections coated in brick dust or where the surface has been cut or mitered.
Can I apply it over Bond & Seal?
Yes. Maintenance Coat can be applied directly over fully cured Bond & Seal for an extra layer of protection across the full pipe installation.
Is the 250ml tin enough for a standard installation?
Yes, the 250ml tin is well-suited to maintenance of a standard residential condensate pipe run. A 1-litre tin (not stocked here) is also available from Condensate Pro for larger or commercial applications.
How do I clean the brush after use?
Because it is water-based, brushes can be cleaned simply with water after application – no solvents needed.
Original: $26.99
-65%$26.99
$9.45More Images
Condensate Pro Maintenance Coat 250ml – Water-Based UV Protective Coating for Condensate & Primary Pro Insulation
Condensate Pro | Item Code: CPMC | MPN: IG005
Condensate Pro Maintenance Coat (IG005) is a water-based protective coating formulated to maintain and extend the life of Condensate Pro and Primary Pro pipe insulation. Supplied in a convenient 250ml tin, it replenishes the UV-resistant and weatherproof coating on the insulation surface, keeping it fully protected against outdoor exposure throughout the life of the boiler or heat pump. Ideal for use at annual service visits or whenever the surface coating shows signs of wear.
Key Features
- UV & weather protection – restores the protective coating on insulation to maintain its outdoor durability and UV resistance.
- Water-based formula – easy to apply with a brush and simple to clean up with water; no solvents required.
- Can be applied over Bond & Seal – the coat can be applied directly over cured Condensate Pro Bond & Seal for comprehensive surface protection.
- Suitable for maintenance & touch-ups – ideal for covering areas disturbed by brick dust during installation, or for periodic recoating during annual service checks.
- Works on both systems – compatible with Condensate Pro and Primary Pro insulation.
- Compliant – meets BS installation standards for condensate pipe insulation maintenance.
Product Specifications
| Volume | 250ml |
| Packaging | Tin |
| Formula | Water-based |
| Application Method | Brush (brush cleans with water) |
| Suitable For | Condensate Pro & Primary Pro insulation; application over Bond & Seal |
| Colour | Black |
| MPN | IG005 |
| Brand | Condensate Pro |
Frequently Asked Questions
When should I use Maintenance Coat?
Maintenance Coat should be applied during annual boiler or heat pump service visits to check and refresh the insulation surface. It is also useful for touching up areas disturbed during installation, such as sections coated in brick dust or where the surface has been cut or mitered.
Can I apply it over Bond & Seal?
Yes. Maintenance Coat can be applied directly over fully cured Bond & Seal for an extra layer of protection across the full pipe installation.
Is the 250ml tin enough for a standard installation?
Yes, the 250ml tin is well-suited to maintenance of a standard residential condensate pipe run. A 1-litre tin (not stocked here) is also available from Condensate Pro for larger or commercial applications.
How do I clean the brush after use?
Because it is water-based, brushes can be cleaned simply with water after application – no solvents needed.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Condensate Pro | Item Code: CPMC | MPN: IG005
Condensate Pro Maintenance Coat (IG005) is a water-based protective coating formulated to maintain and extend the life of Condensate Pro and Primary Pro pipe insulation. Supplied in a convenient 250ml tin, it replenishes the UV-resistant and weatherproof coating on the insulation surface, keeping it fully protected against outdoor exposure throughout the life of the boiler or heat pump. Ideal for use at annual service visits or whenever the surface coating shows signs of wear.
Key Features
- UV & weather protection – restores the protective coating on insulation to maintain its outdoor durability and UV resistance.
- Water-based formula – easy to apply with a brush and simple to clean up with water; no solvents required.
- Can be applied over Bond & Seal – the coat can be applied directly over cured Condensate Pro Bond & Seal for comprehensive surface protection.
- Suitable for maintenance & touch-ups – ideal for covering areas disturbed by brick dust during installation, or for periodic recoating during annual service checks.
- Works on both systems – compatible with Condensate Pro and Primary Pro insulation.
- Compliant – meets BS installation standards for condensate pipe insulation maintenance.
Product Specifications
| Volume | 250ml |
| Packaging | Tin |
| Formula | Water-based |
| Application Method | Brush (brush cleans with water) |
| Suitable For | Condensate Pro & Primary Pro insulation; application over Bond & Seal |
| Colour | Black |
| MPN | IG005 |
| Brand | Condensate Pro |
Frequently Asked Questions
When should I use Maintenance Coat?
Maintenance Coat should be applied during annual boiler or heat pump service visits to check and refresh the insulation surface. It is also useful for touching up areas disturbed during installation, such as sections coated in brick dust or where the surface has been cut or mitered.
Can I apply it over Bond & Seal?
Yes. Maintenance Coat can be applied directly over fully cured Bond & Seal for an extra layer of protection across the full pipe installation.
Is the 250ml tin enough for a standard installation?
Yes, the 250ml tin is well-suited to maintenance of a standard residential condensate pipe run. A 1-litre tin (not stocked here) is also available from Condensate Pro for larger or commercial applications.
How do I clean the brush after use?
Because it is water-based, brushes can be cleaned simply with water after application – no solvents needed.
