✨ New Arrivals Just Dropped!Explore
HomeStore
Worcester Bosch Climate CL3000i 3.5kW Single Split Air Conditioning System – Heating & Cooling A++ Rated R3
Worcester Bosch Climate CL3000i 3.5kW Single Split Air Conditioning System – Heating & Cooling A++ Rated R3
3.5 kW Cooling 3.8 kW Heating A++ Cooling (SEER 7.0) A+ Heating (SCOP 4.2) R32 Refrigerant Silent Mode 20 dB(A) DC Inverter Wi-Fi Ready i-Clean Self-Cleaning
The Worcester Bosch Climate CL3000i 3.5 kW single split system (indoor unit CL3000iU W 35 E + outdoor unit CL3000i 35 E) is a reversible air-to-air heat pump that delivers both cooling and heating from a single wall-mounted unit — making it one of the most versatile comfort solutions for UK homes and small commercial spaces. With a SEER of 7.0 (A++ cooling) and SCOP of 4.2 (A+ heating), it provides year-round climate control at significantly lower running costs than conventional electric heating. The system combines whisper-quiet Silent Mode operation from just 20 dB(A), an intelligent i-Clean self-sanitising evaporator that eliminates up to 99% of bacteria, and optional Wi-Fi control via the Bosch HomeCom Easy app — all in a compact, elegantly styled indoor unit measuring just 802 × 200 × 295 mm.
3.5 kW
Cooling Capacity
3.8 kW
Heating Capacity
SEER 7.0
A++ Cooling
SCOP 4.2
A+ Heating
20 dB
Silent Mode
Key Features & Benefits
DC Inverter Technology — Efficient & Responsive
Variable-speed DC inverter compressor continuously modulates output to match the exact heating or cooling load, eliminating the on/off cycling of fixed-speed units. The result is faster room temperature recovery, tighter temperature control (±0.5°C) and significantly lower electricity consumption — the rated 3.5 kW cooling capacity draws just 1,096 W at nominal load.
A++ Cooling / A+ Heating ErP Rating
With a SEER of 7.0 for cooling and SCOP of 4.2 for average-climate heating, the CL3000i meets and exceeds current EU ErP seasonal efficiency requirements. In warmer conditions, the SCOP rises to 5.5 (A+++ rated). This level of efficiency translates directly into lower energy bills versus older fixed-speed or lower-rated units.
Silent Mode — Indoor from 20 dB(A)
At its quietest setting, the indoor unit operates at just 20 dB(A) — quieter than a whispered conversation and virtually imperceptible in use. Three operating speeds are available (Hi/Mi/Lo: 37/32/22 dB(A)) alongside the dedicated Silent Mode, making this system genuinely suitable for bedrooms, home offices and noise-sensitive environments.
i-Clean Self-Sanitising Evaporator
Worcester Bosch's i-Clean function heats the evaporator coil to 56°C after use, destroying bacteria, mould spores and other biological contaminants that would otherwise accumulate on the heat exchanger surface. This keeps the unit hygienic between service visits and eliminates up to 99% of bacteria — ensuring only clean, fresh air is circulated into the room.
Double Filtration — Air Purification as Standard
A dual-stage filtration system captures airborne particulates and neutralises odours, harmful gases and volatile organic compounds (VOCs) before they reach the room. The filter is washable and reusable, reducing maintenance costs and ensuring consistently clean air throughout the system's life.
Follow Me — Personalised Room Comfort
The Follow Me feature uses the temperature sensor built into the remote controller rather than the indoor unit sensor, so the system responds to the actual temperature at your location in the room. This is particularly effective in large open-plan spaces where the indoor unit may be some distance from the occupied zone.
Heating Down to -15°C Outdoor Temperature
The CL3000i maintains full heating performance down to -15°C outdoor ambient temperature, making it genuinely useful as a primary or supplementary heating source throughout UK winters. The wide operating range (-15°C to +50°C for cooling, -15°C to +24°C for heating) gives confidence in year-round reliability regardless of weather conditions.
Wi-Fi Control via Bosch HomeCom Easy App
With the optional Connect Key G10 CL-1 accessory, the CL3000i connects to the Bosch HomeCom Easy app for smartphone and tablet control from anywhere. Schedule operating times, adjust temperature setpoints, monitor energy usage and switch modes remotely — full remote management without a separate controller.
Corrosion-Resistant Outdoor Unit
The outdoor unit features a golden-fin anti-corrosion coating on the heat exchanger, providing protection against salt-laden air and atmospheric pollutants. This makes the system particularly suitable for coastal and urban UK locations and contributes to a long, low-maintenance service life.
R32 Low-GWP Refrigerant
Charged with R32 refrigerant (GWP 675) — approximately one third of the GWP of the R410A it replaces — the CL3000i aligns with the current EU F-Gas regulation trajectory towards lower-impact refrigerants. The hermetically sealed system contains just 0.65 kg of refrigerant.
Technical Specifications — CL3000i 3.5 kW (35 E)
| Cooling Performance | |
| Rated Cooling Capacity (min – nom – max) | 3.5 kW (1.3 – 3.5 – 4.3 kW) |
| Cooling Power Input (nominal) | 1,096 W (120 – 1,650 W) |
| Cooling Current Input (nominal) | 4.76 A (0.5 – 7.2 A) |
| Seasonal Design Cooling Load (Pdesignc) | 3.6 kW |
| SEER | 7.0 |
| Cooling Energy Efficiency Class | A++ |
| Heating Performance | |
| Rated Heating Capacity (min – nom – max) | 3.8 kW (1.1 – 3.8 – 4.4 kW) |
| Heating Power Input (nominal) | 1,027 W (110 – 1,480 W) |
| Heating Current Input (nominal) | 4.46 A (0.5 – 6.4 A) |
| Seasonal Design Heating Load — Average Climate (Pdesignh) | 2.5 kW |
| SCOP — Average Climate | 4.2 (A+ rated) |
| SCOP — Warmer Climate | 5.5 (A+++ rated) |
| Balance Point Temperature (Tbiv) | -7°C (average) / +2°C (warmer) |
| Heating Operating Range (outdoor) | -15°C to +24°C |
| Electrical Supply | |
| Power Supply | 220–240 V, 1-Phase, 50 Hz |
| Indoor Unit — CL3000iU W 35 E | |
| Dimensions (W × D × H) | 802 × 200 × 295 mm |
| Net / Gross Weight | 8.7 kg / 11.5 kg |
| Airflow Volume (Hi / Mi / Lo) | 530 / 400 / 350 m³/h |
| Sound Pressure Level (Hi / Mi / Lo / Silent) | 37 / 32 / 22 / 20 dB(A) |
| Sound Power Level | 56 dB(A) |
| Part Number | 7-733-701-566 |
| Outdoor Unit — CL3000i 35 E | |
| Dimensions (W × D × H) | 720 × 270 × 495 mm |
| Net / Gross Weight | 23.7 kg / 25.5 kg |
| Airflow Volume | 1,850 m³/h |
| Sound Pressure Level | 55.0 dB(A) |
| Sound Power Level | 63.0 dB(A) |
| Part Number | 7-733-701-567 |
| Refrigerant Circuit | |
| Refrigerant Type | R32 |
| GWP | 675 |
| Refrigerant Charge | 0.65 kg |
| Design Pressure (high / low) | 4.3 MPa / 1.7 MPa |
| Liquid Pipe Diameter | 6.35 mm (¼") |
| Gas Pipe Diameter | 9.52 mm (⅜") |
| Maximum Pipe Length | 25 m |
| Maximum Height Difference (indoor/outdoor) | 10 m |
| Additional Refrigerant Charge (beyond 5 m) | 12 g/m |
| Operating Conditions | |
| Indoor Cooling / Heating Temperature Range | 17–32°C / 0–30°C |
| Outdoor Cooling Temperature Range | -15°C to +50°C |
| Outdoor Heating Temperature Range | -15°C to +24°C |
| Kit Part Number | |
| BOM (complete set) | 7733701736 |
ℹ F-Gas Qualified Installation Required: This system contains fluorinated greenhouse gases (R32) and must be installed, commissioned and serviced by an F-Gas registered engineer. Electrical connection must be carried out by a qualified electrician. Wi-Fi control requires the optional Connect Key G10 CL-1 (sold separately). A 3-port valve is not required for single-split operation.
Frequently Asked Questions
Related Products
Worcester Bosch CL3000i 2.6 kW
For smaller rooms up to ~25 m²
Worcester Bosch CL3000i 5.3 kW
For larger rooms up to ~50 m²
Bosch Connect Key G10 CL-1
Wi-Fi accessory for HomeCom Easy app
$388.77
Original: $1,110.78
-65%Worcester Bosch Climate CL3000i 3.5kW Single Split Air Conditioning System – Heating & Cooling A++ Rated R3—
$1,110.78
$388.77More Images
Worcester Bosch Climate CL3000i 3.5kW Single Split Air Conditioning System – Heating & Cooling A++ Rated R3
3.5 kW Cooling 3.8 kW Heating A++ Cooling (SEER 7.0) A+ Heating (SCOP 4.2) R32 Refrigerant Silent Mode 20 dB(A) DC Inverter Wi-Fi Ready i-Clean Self-Cleaning
The Worcester Bosch Climate CL3000i 3.5 kW single split system (indoor unit CL3000iU W 35 E + outdoor unit CL3000i 35 E) is a reversible air-to-air heat pump that delivers both cooling and heating from a single wall-mounted unit — making it one of the most versatile comfort solutions for UK homes and small commercial spaces. With a SEER of 7.0 (A++ cooling) and SCOP of 4.2 (A+ heating), it provides year-round climate control at significantly lower running costs than conventional electric heating. The system combines whisper-quiet Silent Mode operation from just 20 dB(A), an intelligent i-Clean self-sanitising evaporator that eliminates up to 99% of bacteria, and optional Wi-Fi control via the Bosch HomeCom Easy app — all in a compact, elegantly styled indoor unit measuring just 802 × 200 × 295 mm.
3.5 kW
Cooling Capacity
3.8 kW
Heating Capacity
SEER 7.0
A++ Cooling
SCOP 4.2
A+ Heating
20 dB
Silent Mode
Key Features & Benefits
DC Inverter Technology — Efficient & Responsive
Variable-speed DC inverter compressor continuously modulates output to match the exact heating or cooling load, eliminating the on/off cycling of fixed-speed units. The result is faster room temperature recovery, tighter temperature control (±0.5°C) and significantly lower electricity consumption — the rated 3.5 kW cooling capacity draws just 1,096 W at nominal load.
A++ Cooling / A+ Heating ErP Rating
With a SEER of 7.0 for cooling and SCOP of 4.2 for average-climate heating, the CL3000i meets and exceeds current EU ErP seasonal efficiency requirements. In warmer conditions, the SCOP rises to 5.5 (A+++ rated). This level of efficiency translates directly into lower energy bills versus older fixed-speed or lower-rated units.
Silent Mode — Indoor from 20 dB(A)
At its quietest setting, the indoor unit operates at just 20 dB(A) — quieter than a whispered conversation and virtually imperceptible in use. Three operating speeds are available (Hi/Mi/Lo: 37/32/22 dB(A)) alongside the dedicated Silent Mode, making this system genuinely suitable for bedrooms, home offices and noise-sensitive environments.
i-Clean Self-Sanitising Evaporator
Worcester Bosch's i-Clean function heats the evaporator coil to 56°C after use, destroying bacteria, mould spores and other biological contaminants that would otherwise accumulate on the heat exchanger surface. This keeps the unit hygienic between service visits and eliminates up to 99% of bacteria — ensuring only clean, fresh air is circulated into the room.
Double Filtration — Air Purification as Standard
A dual-stage filtration system captures airborne particulates and neutralises odours, harmful gases and volatile organic compounds (VOCs) before they reach the room. The filter is washable and reusable, reducing maintenance costs and ensuring consistently clean air throughout the system's life.
Follow Me — Personalised Room Comfort
The Follow Me feature uses the temperature sensor built into the remote controller rather than the indoor unit sensor, so the system responds to the actual temperature at your location in the room. This is particularly effective in large open-plan spaces where the indoor unit may be some distance from the occupied zone.
Heating Down to -15°C Outdoor Temperature
The CL3000i maintains full heating performance down to -15°C outdoor ambient temperature, making it genuinely useful as a primary or supplementary heating source throughout UK winters. The wide operating range (-15°C to +50°C for cooling, -15°C to +24°C for heating) gives confidence in year-round reliability regardless of weather conditions.
Wi-Fi Control via Bosch HomeCom Easy App
With the optional Connect Key G10 CL-1 accessory, the CL3000i connects to the Bosch HomeCom Easy app for smartphone and tablet control from anywhere. Schedule operating times, adjust temperature setpoints, monitor energy usage and switch modes remotely — full remote management without a separate controller.
Corrosion-Resistant Outdoor Unit
The outdoor unit features a golden-fin anti-corrosion coating on the heat exchanger, providing protection against salt-laden air and atmospheric pollutants. This makes the system particularly suitable for coastal and urban UK locations and contributes to a long, low-maintenance service life.
R32 Low-GWP Refrigerant
Charged with R32 refrigerant (GWP 675) — approximately one third of the GWP of the R410A it replaces — the CL3000i aligns with the current EU F-Gas regulation trajectory towards lower-impact refrigerants. The hermetically sealed system contains just 0.65 kg of refrigerant.
Technical Specifications — CL3000i 3.5 kW (35 E)
| Cooling Performance | |
| Rated Cooling Capacity (min – nom – max) | 3.5 kW (1.3 – 3.5 – 4.3 kW) |
| Cooling Power Input (nominal) | 1,096 W (120 – 1,650 W) |
| Cooling Current Input (nominal) | 4.76 A (0.5 – 7.2 A) |
| Seasonal Design Cooling Load (Pdesignc) | 3.6 kW |
| SEER | 7.0 |
| Cooling Energy Efficiency Class | A++ |
| Heating Performance | |
| Rated Heating Capacity (min – nom – max) | 3.8 kW (1.1 – 3.8 – 4.4 kW) |
| Heating Power Input (nominal) | 1,027 W (110 – 1,480 W) |
| Heating Current Input (nominal) | 4.46 A (0.5 – 6.4 A) |
| Seasonal Design Heating Load — Average Climate (Pdesignh) | 2.5 kW |
| SCOP — Average Climate | 4.2 (A+ rated) |
| SCOP — Warmer Climate | 5.5 (A+++ rated) |
| Balance Point Temperature (Tbiv) | -7°C (average) / +2°C (warmer) |
| Heating Operating Range (outdoor) | -15°C to +24°C |
| Electrical Supply | |
| Power Supply | 220–240 V, 1-Phase, 50 Hz |
| Indoor Unit — CL3000iU W 35 E | |
| Dimensions (W × D × H) | 802 × 200 × 295 mm |
| Net / Gross Weight | 8.7 kg / 11.5 kg |
| Airflow Volume (Hi / Mi / Lo) | 530 / 400 / 350 m³/h |
| Sound Pressure Level (Hi / Mi / Lo / Silent) | 37 / 32 / 22 / 20 dB(A) |
| Sound Power Level | 56 dB(A) |
| Part Number | 7-733-701-566 |
| Outdoor Unit — CL3000i 35 E | |
| Dimensions (W × D × H) | 720 × 270 × 495 mm |
| Net / Gross Weight | 23.7 kg / 25.5 kg |
| Airflow Volume | 1,850 m³/h |
| Sound Pressure Level | 55.0 dB(A) |
| Sound Power Level | 63.0 dB(A) |
| Part Number | 7-733-701-567 |
| Refrigerant Circuit | |
| Refrigerant Type | R32 |
| GWP | 675 |
| Refrigerant Charge | 0.65 kg |
| Design Pressure (high / low) | 4.3 MPa / 1.7 MPa |
| Liquid Pipe Diameter | 6.35 mm (¼") |
| Gas Pipe Diameter | 9.52 mm (⅜") |
| Maximum Pipe Length | 25 m |
| Maximum Height Difference (indoor/outdoor) | 10 m |
| Additional Refrigerant Charge (beyond 5 m) | 12 g/m |
| Operating Conditions | |
| Indoor Cooling / Heating Temperature Range | 17–32°C / 0–30°C |
| Outdoor Cooling Temperature Range | -15°C to +50°C |
| Outdoor Heating Temperature Range | -15°C to +24°C |
| Kit Part Number | |
| BOM (complete set) | 7733701736 |
ℹ F-Gas Qualified Installation Required: This system contains fluorinated greenhouse gases (R32) and must be installed, commissioned and serviced by an F-Gas registered engineer. Electrical connection must be carried out by a qualified electrician. Wi-Fi control requires the optional Connect Key G10 CL-1 (sold separately). A 3-port valve is not required for single-split operation.
Frequently Asked Questions
Related Products
Worcester Bosch CL3000i 2.6 kW
For smaller rooms up to ~25 m²
Worcester Bosch CL3000i 5.3 kW
For larger rooms up to ~50 m²
Bosch Connect Key G10 CL-1
Wi-Fi accessory for HomeCom Easy app
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
3.5 kW Cooling 3.8 kW Heating A++ Cooling (SEER 7.0) A+ Heating (SCOP 4.2) R32 Refrigerant Silent Mode 20 dB(A) DC Inverter Wi-Fi Ready i-Clean Self-Cleaning
The Worcester Bosch Climate CL3000i 3.5 kW single split system (indoor unit CL3000iU W 35 E + outdoor unit CL3000i 35 E) is a reversible air-to-air heat pump that delivers both cooling and heating from a single wall-mounted unit — making it one of the most versatile comfort solutions for UK homes and small commercial spaces. With a SEER of 7.0 (A++ cooling) and SCOP of 4.2 (A+ heating), it provides year-round climate control at significantly lower running costs than conventional electric heating. The system combines whisper-quiet Silent Mode operation from just 20 dB(A), an intelligent i-Clean self-sanitising evaporator that eliminates up to 99% of bacteria, and optional Wi-Fi control via the Bosch HomeCom Easy app — all in a compact, elegantly styled indoor unit measuring just 802 × 200 × 295 mm.
3.5 kW
Cooling Capacity
3.8 kW
Heating Capacity
SEER 7.0
A++ Cooling
SCOP 4.2
A+ Heating
20 dB
Silent Mode
Key Features & Benefits
DC Inverter Technology — Efficient & Responsive
Variable-speed DC inverter compressor continuously modulates output to match the exact heating or cooling load, eliminating the on/off cycling of fixed-speed units. The result is faster room temperature recovery, tighter temperature control (±0.5°C) and significantly lower electricity consumption — the rated 3.5 kW cooling capacity draws just 1,096 W at nominal load.
A++ Cooling / A+ Heating ErP Rating
With a SEER of 7.0 for cooling and SCOP of 4.2 for average-climate heating, the CL3000i meets and exceeds current EU ErP seasonal efficiency requirements. In warmer conditions, the SCOP rises to 5.5 (A+++ rated). This level of efficiency translates directly into lower energy bills versus older fixed-speed or lower-rated units.
Silent Mode — Indoor from 20 dB(A)
At its quietest setting, the indoor unit operates at just 20 dB(A) — quieter than a whispered conversation and virtually imperceptible in use. Three operating speeds are available (Hi/Mi/Lo: 37/32/22 dB(A)) alongside the dedicated Silent Mode, making this system genuinely suitable for bedrooms, home offices and noise-sensitive environments.
i-Clean Self-Sanitising Evaporator
Worcester Bosch's i-Clean function heats the evaporator coil to 56°C after use, destroying bacteria, mould spores and other biological contaminants that would otherwise accumulate on the heat exchanger surface. This keeps the unit hygienic between service visits and eliminates up to 99% of bacteria — ensuring only clean, fresh air is circulated into the room.
Double Filtration — Air Purification as Standard
A dual-stage filtration system captures airborne particulates and neutralises odours, harmful gases and volatile organic compounds (VOCs) before they reach the room. The filter is washable and reusable, reducing maintenance costs and ensuring consistently clean air throughout the system's life.
Follow Me — Personalised Room Comfort
The Follow Me feature uses the temperature sensor built into the remote controller rather than the indoor unit sensor, so the system responds to the actual temperature at your location in the room. This is particularly effective in large open-plan spaces where the indoor unit may be some distance from the occupied zone.
Heating Down to -15°C Outdoor Temperature
The CL3000i maintains full heating performance down to -15°C outdoor ambient temperature, making it genuinely useful as a primary or supplementary heating source throughout UK winters. The wide operating range (-15°C to +50°C for cooling, -15°C to +24°C for heating) gives confidence in year-round reliability regardless of weather conditions.
Wi-Fi Control via Bosch HomeCom Easy App
With the optional Connect Key G10 CL-1 accessory, the CL3000i connects to the Bosch HomeCom Easy app for smartphone and tablet control from anywhere. Schedule operating times, adjust temperature setpoints, monitor energy usage and switch modes remotely — full remote management without a separate controller.
Corrosion-Resistant Outdoor Unit
The outdoor unit features a golden-fin anti-corrosion coating on the heat exchanger, providing protection against salt-laden air and atmospheric pollutants. This makes the system particularly suitable for coastal and urban UK locations and contributes to a long, low-maintenance service life.
R32 Low-GWP Refrigerant
Charged with R32 refrigerant (GWP 675) — approximately one third of the GWP of the R410A it replaces — the CL3000i aligns with the current EU F-Gas regulation trajectory towards lower-impact refrigerants. The hermetically sealed system contains just 0.65 kg of refrigerant.
Technical Specifications — CL3000i 3.5 kW (35 E)
| Cooling Performance | |
| Rated Cooling Capacity (min – nom – max) | 3.5 kW (1.3 – 3.5 – 4.3 kW) |
| Cooling Power Input (nominal) | 1,096 W (120 – 1,650 W) |
| Cooling Current Input (nominal) | 4.76 A (0.5 – 7.2 A) |
| Seasonal Design Cooling Load (Pdesignc) | 3.6 kW |
| SEER | 7.0 |
| Cooling Energy Efficiency Class | A++ |
| Heating Performance | |
| Rated Heating Capacity (min – nom – max) | 3.8 kW (1.1 – 3.8 – 4.4 kW) |
| Heating Power Input (nominal) | 1,027 W (110 – 1,480 W) |
| Heating Current Input (nominal) | 4.46 A (0.5 – 6.4 A) |
| Seasonal Design Heating Load — Average Climate (Pdesignh) | 2.5 kW |
| SCOP — Average Climate | 4.2 (A+ rated) |
| SCOP — Warmer Climate | 5.5 (A+++ rated) |
| Balance Point Temperature (Tbiv) | -7°C (average) / +2°C (warmer) |
| Heating Operating Range (outdoor) | -15°C to +24°C |
| Electrical Supply | |
| Power Supply | 220–240 V, 1-Phase, 50 Hz |
| Indoor Unit — CL3000iU W 35 E | |
| Dimensions (W × D × H) | 802 × 200 × 295 mm |
| Net / Gross Weight | 8.7 kg / 11.5 kg |
| Airflow Volume (Hi / Mi / Lo) | 530 / 400 / 350 m³/h |
| Sound Pressure Level (Hi / Mi / Lo / Silent) | 37 / 32 / 22 / 20 dB(A) |
| Sound Power Level | 56 dB(A) |
| Part Number | 7-733-701-566 |
| Outdoor Unit — CL3000i 35 E | |
| Dimensions (W × D × H) | 720 × 270 × 495 mm |
| Net / Gross Weight | 23.7 kg / 25.5 kg |
| Airflow Volume | 1,850 m³/h |
| Sound Pressure Level | 55.0 dB(A) |
| Sound Power Level | 63.0 dB(A) |
| Part Number | 7-733-701-567 |
| Refrigerant Circuit | |
| Refrigerant Type | R32 |
| GWP | 675 |
| Refrigerant Charge | 0.65 kg |
| Design Pressure (high / low) | 4.3 MPa / 1.7 MPa |
| Liquid Pipe Diameter | 6.35 mm (¼") |
| Gas Pipe Diameter | 9.52 mm (⅜") |
| Maximum Pipe Length | 25 m |
| Maximum Height Difference (indoor/outdoor) | 10 m |
| Additional Refrigerant Charge (beyond 5 m) | 12 g/m |
| Operating Conditions | |
| Indoor Cooling / Heating Temperature Range | 17–32°C / 0–30°C |
| Outdoor Cooling Temperature Range | -15°C to +50°C |
| Outdoor Heating Temperature Range | -15°C to +24°C |
| Kit Part Number | |
| BOM (complete set) | 7733701736 |
ℹ F-Gas Qualified Installation Required: This system contains fluorinated greenhouse gases (R32) and must be installed, commissioned and serviced by an F-Gas registered engineer. Electrical connection must be carried out by a qualified electrician. Wi-Fi control requires the optional Connect Key G10 CL-1 (sold separately). A 3-port valve is not required for single-split operation.
Frequently Asked Questions
Related Products
Worcester Bosch CL3000i 2.6 kW
For smaller rooms up to ~25 m²
Worcester Bosch CL3000i 5.3 kW
For larger rooms up to ~50 m²
Bosch Connect Key G10 CL-1
Wi-Fi accessory for HomeCom Easy app
