✨ New Arrivals Just Dropped!Explore
myenergi eddi+ 3-Phase Solar Energy Diverter – Three Phase, WiFi
HomeStore

myenergi eddi+ 3-Phase Solar Energy Diverter – Three Phase, WiFi

myenergi eddi+ 3-Phase Solar Energy Diverter – Three Phase, WiFi

The myenergi eddi+ 3-Phase is the three-phase version of myenergi's popular solar energy diverter, designed for commercial premises and larger residential properties with a three-phase electricity supply. It captures surplus solar PV or wind energy across all three phases and routes it to immersion heaters, storage heaters, or other resistive loads — delivering free hot water or space heating that would otherwise be wasted as grid export.

Made in the UK 3-Year Warranty WiFi Enabled 3-Phase Supply Required Up to 9kW Output
ℹ️ Single-Phase or Three-Phase?

Most UK homes have a single-phase supply — if you're unsure, check your electricity meter or consumer unit. The eddi+ 3-Phase (this product) is intended for properties with a dedicated three-phase supply, typically commercial buildings, workshops, large farms, or certain modern developments. For standard domestic properties, please see the myenergi eddi 2.1 (single-phase).

Three-Phase Diversion Capacity
9kW Max output per phase
3 Phases monitored & controlled
2 Heaters supported (sequential)
Key Features
True 3-Phase Surplus Diversion Monitors all three phases simultaneously, diverting excess renewable energy thousands of times per second for balanced and precise control.
Up to 9kW Heater Load Supports three-phase heating elements up to 9kW (16A per phase max), making it suitable for large hot water cylinders and commercial heating applications.
WiFi App Control Full remote control via the myenergi app — set schedules, run manual boosts, monitor performance, and receive firmware updates automatically.
Temperature Monitoring Supports up to two PT1000 temperature sensors (one supplied) for monitoring water or air temperature and protecting against overheating.
Graphical LCD Display On-device display shows real-time generation, consumption, and diversion figures without needing to open the app.
Fan-Less & Rugged Passive cooling design means completely silent operation. Integral bypass switch and built-in overload and short-circuit protection.
Harvi Wireless Compatibility Supports myenergi harvi wireless sensors for installations where running CT cables to the main board is not practical.
myenergi Ecosystem Works alongside myenergi zappi EV chargers, libbi battery storage, and other devices — all managed through a single app with shared surplus logic.
Technical Specifications
Specification Details
Part Number MYEN-EDDI-16A3P02H
Phase Three phase
Maximum Heater Load 0–9kW linearly controlled (16A max per phase)
Minimum Load 100W
Standby Power 3W
Heaters Supported Up to 2 (sequential control)
Power Supply Three-phase 230/400V AC, 50Hz
Connectivity WiFi (2.4GHz)
App Control myenergi app (iOS & Android)
Display Graphical LCD with LED backlight
Bypass Switch Integral safety bypass
Temperature Sensors Up to 2 × PT1000 (1 supplied)
Protection Overload, short-circuit, automatic DST
Compatible Sensors CT clamp (included), optional harvi wireless sensor
Cooling Fan-less passive cooling
Dimensions (H × W × D) 220 × 205 × 87 mm
Weight 4.3 kg
Mounting Wall-mounted with included bracket
Origin Made in the UK
Warranty 3 years
Compliance CE / UKCA marked
What's in the Box
  • myenergi eddi+ 3-Phase diverter unit
  • CT clamp with 5m cable
  • 1 × PT1000 temperature sensor
  • Wall-mounting bracket
  • WiFi and radio antennae
  • Wiring accessories
⚡ Installation Note

The eddi+ 3-Phase must be installed by a qualified electrician with experience of three-phase wiring. The unit requires a three-phase supply and is connected between the three-phase grid connection and the heating load. A separate three-phase CT clamp or harvi sensor is required to monitor the three-phase import/export accurately. This product is not suitable for standard single-phase domestic supplies.

Frequently Asked Questions
How do I know if I have a three-phase supply?
A three-phase supply will typically have a larger, heavier meter box, three separate live conductors (often colour-coded brown, black, and grey), and a three-phase consumer unit. If unsure, ask a qualified electrician to check — most standard UK homes have single-phase, while commercial, industrial, and some larger residential properties have three-phase.
Can the eddi+ 3-Phase control standard single-phase immersion heaters?
The eddi+ 3-Phase is primarily designed for three-phase resistive loads. While it can be connected in certain hybrid configurations, it is most effective and correctly specified when used with three-phase heating elements. For single-phase immersion heaters in domestic settings, the eddi 2.1 is the correct product.
What solar PV systems is it compatible with?
The eddi+ 3-Phase is compatible with any grid-connected solar PV or wind generation system, whether single-phase or three-phase generation, as it measures at the grid connection point using CT clamps. It does not need to connect directly to your inverter.
Can it work alongside a myenergi zappi charger or libbi battery?
Yes. All myenergi devices share surplus information through the myenergi hub and app. You can set priorities to determine whether surplus energy goes to the battery, the EV charger, or the immersion heater first.
Is there a manual boost function for when we need extra hot water?
Yes — the eddi+ has a manual boost function accessible both from the device itself and from the myenergi app. You can trigger an immediate full-power boost regardless of surplus, drawing from the grid if necessary, and set it to run for a defined duration or until a set temperature is reached (when using a PT1000 sensor).
$385.94

Original: $1,102.68

-65%
myenergi eddi+ 3-Phase Solar Energy Diverter – Three Phase, WiFi—

$1,102.68

$385.94

More Images

myenergi eddi+ 3-Phase Solar Energy Diverter – Three Phase, WiFi - Image 2
myenergi eddi+ 3-Phase Solar Energy Diverter – Three Phase, WiFi - Image 3

myenergi eddi+ 3-Phase Solar Energy Diverter – Three Phase, WiFi

The myenergi eddi+ 3-Phase is the three-phase version of myenergi's popular solar energy diverter, designed for commercial premises and larger residential properties with a three-phase electricity supply. It captures surplus solar PV or wind energy across all three phases and routes it to immersion heaters, storage heaters, or other resistive loads — delivering free hot water or space heating that would otherwise be wasted as grid export.

Made in the UK 3-Year Warranty WiFi Enabled 3-Phase Supply Required Up to 9kW Output
ℹ️ Single-Phase or Three-Phase?

Most UK homes have a single-phase supply — if you're unsure, check your electricity meter or consumer unit. The eddi+ 3-Phase (this product) is intended for properties with a dedicated three-phase supply, typically commercial buildings, workshops, large farms, or certain modern developments. For standard domestic properties, please see the myenergi eddi 2.1 (single-phase).

Three-Phase Diversion Capacity
9kW Max output per phase
3 Phases monitored & controlled
2 Heaters supported (sequential)
Key Features
True 3-Phase Surplus Diversion Monitors all three phases simultaneously, diverting excess renewable energy thousands of times per second for balanced and precise control.
Up to 9kW Heater Load Supports three-phase heating elements up to 9kW (16A per phase max), making it suitable for large hot water cylinders and commercial heating applications.
WiFi App Control Full remote control via the myenergi app — set schedules, run manual boosts, monitor performance, and receive firmware updates automatically.
Temperature Monitoring Supports up to two PT1000 temperature sensors (one supplied) for monitoring water or air temperature and protecting against overheating.
Graphical LCD Display On-device display shows real-time generation, consumption, and diversion figures without needing to open the app.
Fan-Less & Rugged Passive cooling design means completely silent operation. Integral bypass switch and built-in overload and short-circuit protection.
Harvi Wireless Compatibility Supports myenergi harvi wireless sensors for installations where running CT cables to the main board is not practical.
myenergi Ecosystem Works alongside myenergi zappi EV chargers, libbi battery storage, and other devices — all managed through a single app with shared surplus logic.
Technical Specifications
Specification Details
Part Number MYEN-EDDI-16A3P02H
Phase Three phase
Maximum Heater Load 0–9kW linearly controlled (16A max per phase)
Minimum Load 100W
Standby Power 3W
Heaters Supported Up to 2 (sequential control)
Power Supply Three-phase 230/400V AC, 50Hz
Connectivity WiFi (2.4GHz)
App Control myenergi app (iOS & Android)
Display Graphical LCD with LED backlight
Bypass Switch Integral safety bypass
Temperature Sensors Up to 2 × PT1000 (1 supplied)
Protection Overload, short-circuit, automatic DST
Compatible Sensors CT clamp (included), optional harvi wireless sensor
Cooling Fan-less passive cooling
Dimensions (H × W × D) 220 × 205 × 87 mm
Weight 4.3 kg
Mounting Wall-mounted with included bracket
Origin Made in the UK
Warranty 3 years
Compliance CE / UKCA marked
What's in the Box
  • myenergi eddi+ 3-Phase diverter unit
  • CT clamp with 5m cable
  • 1 × PT1000 temperature sensor
  • Wall-mounting bracket
  • WiFi and radio antennae
  • Wiring accessories
⚡ Installation Note

The eddi+ 3-Phase must be installed by a qualified electrician with experience of three-phase wiring. The unit requires a three-phase supply and is connected between the three-phase grid connection and the heating load. A separate three-phase CT clamp or harvi sensor is required to monitor the three-phase import/export accurately. This product is not suitable for standard single-phase domestic supplies.

Frequently Asked Questions
How do I know if I have a three-phase supply?
A three-phase supply will typically have a larger, heavier meter box, three separate live conductors (often colour-coded brown, black, and grey), and a three-phase consumer unit. If unsure, ask a qualified electrician to check — most standard UK homes have single-phase, while commercial, industrial, and some larger residential properties have three-phase.
Can the eddi+ 3-Phase control standard single-phase immersion heaters?
The eddi+ 3-Phase is primarily designed for three-phase resistive loads. While it can be connected in certain hybrid configurations, it is most effective and correctly specified when used with three-phase heating elements. For single-phase immersion heaters in domestic settings, the eddi 2.1 is the correct product.
What solar PV systems is it compatible with?
The eddi+ 3-Phase is compatible with any grid-connected solar PV or wind generation system, whether single-phase or three-phase generation, as it measures at the grid connection point using CT clamps. It does not need to connect directly to your inverter.
Can it work alongside a myenergi zappi charger or libbi battery?
Yes. All myenergi devices share surplus information through the myenergi hub and app. You can set priorities to determine whether surplus energy goes to the battery, the EV charger, or the immersion heater first.
Is there a manual boost function for when we need extra hot water?
Yes — the eddi+ has a manual boost function accessible both from the device itself and from the myenergi app. You can trigger an immediate full-power boost regardless of surplus, drawing from the grid if necessary, and set it to run for a defined duration or until a set temperature is reached (when using a PT1000 sensor).

Product Information

Shipping & Returns

Description

The myenergi eddi+ 3-Phase is the three-phase version of myenergi's popular solar energy diverter, designed for commercial premises and larger residential properties with a three-phase electricity supply. It captures surplus solar PV or wind energy across all three phases and routes it to immersion heaters, storage heaters, or other resistive loads — delivering free hot water or space heating that would otherwise be wasted as grid export.

Made in the UK 3-Year Warranty WiFi Enabled 3-Phase Supply Required Up to 9kW Output
ℹ️ Single-Phase or Three-Phase?

Most UK homes have a single-phase supply — if you're unsure, check your electricity meter or consumer unit. The eddi+ 3-Phase (this product) is intended for properties with a dedicated three-phase supply, typically commercial buildings, workshops, large farms, or certain modern developments. For standard domestic properties, please see the myenergi eddi 2.1 (single-phase).

Three-Phase Diversion Capacity
9kW Max output per phase
3 Phases monitored & controlled
2 Heaters supported (sequential)
Key Features
True 3-Phase Surplus Diversion Monitors all three phases simultaneously, diverting excess renewable energy thousands of times per second for balanced and precise control.
Up to 9kW Heater Load Supports three-phase heating elements up to 9kW (16A per phase max), making it suitable for large hot water cylinders and commercial heating applications.
WiFi App Control Full remote control via the myenergi app — set schedules, run manual boosts, monitor performance, and receive firmware updates automatically.
Temperature Monitoring Supports up to two PT1000 temperature sensors (one supplied) for monitoring water or air temperature and protecting against overheating.
Graphical LCD Display On-device display shows real-time generation, consumption, and diversion figures without needing to open the app.
Fan-Less & Rugged Passive cooling design means completely silent operation. Integral bypass switch and built-in overload and short-circuit protection.
Harvi Wireless Compatibility Supports myenergi harvi wireless sensors for installations where running CT cables to the main board is not practical.
myenergi Ecosystem Works alongside myenergi zappi EV chargers, libbi battery storage, and other devices — all managed through a single app with shared surplus logic.
Technical Specifications
Specification Details
Part Number MYEN-EDDI-16A3P02H
Phase Three phase
Maximum Heater Load 0–9kW linearly controlled (16A max per phase)
Minimum Load 100W
Standby Power 3W
Heaters Supported Up to 2 (sequential control)
Power Supply Three-phase 230/400V AC, 50Hz
Connectivity WiFi (2.4GHz)
App Control myenergi app (iOS & Android)
Display Graphical LCD with LED backlight
Bypass Switch Integral safety bypass
Temperature Sensors Up to 2 × PT1000 (1 supplied)
Protection Overload, short-circuit, automatic DST
Compatible Sensors CT clamp (included), optional harvi wireless sensor
Cooling Fan-less passive cooling
Dimensions (H × W × D) 220 × 205 × 87 mm
Weight 4.3 kg
Mounting Wall-mounted with included bracket
Origin Made in the UK
Warranty 3 years
Compliance CE / UKCA marked
What's in the Box
  • myenergi eddi+ 3-Phase diverter unit
  • CT clamp with 5m cable
  • 1 × PT1000 temperature sensor
  • Wall-mounting bracket
  • WiFi and radio antennae
  • Wiring accessories
⚡ Installation Note

The eddi+ 3-Phase must be installed by a qualified electrician with experience of three-phase wiring. The unit requires a three-phase supply and is connected between the three-phase grid connection and the heating load. A separate three-phase CT clamp or harvi sensor is required to monitor the three-phase import/export accurately. This product is not suitable for standard single-phase domestic supplies.

Frequently Asked Questions
How do I know if I have a three-phase supply?
A three-phase supply will typically have a larger, heavier meter box, three separate live conductors (often colour-coded brown, black, and grey), and a three-phase consumer unit. If unsure, ask a qualified electrician to check — most standard UK homes have single-phase, while commercial, industrial, and some larger residential properties have three-phase.
Can the eddi+ 3-Phase control standard single-phase immersion heaters?
The eddi+ 3-Phase is primarily designed for three-phase resistive loads. While it can be connected in certain hybrid configurations, it is most effective and correctly specified when used with three-phase heating elements. For single-phase immersion heaters in domestic settings, the eddi 2.1 is the correct product.
What solar PV systems is it compatible with?
The eddi+ 3-Phase is compatible with any grid-connected solar PV or wind generation system, whether single-phase or three-phase generation, as it measures at the grid connection point using CT clamps. It does not need to connect directly to your inverter.
Can it work alongside a myenergi zappi charger or libbi battery?
Yes. All myenergi devices share surplus information through the myenergi hub and app. You can set priorities to determine whether surplus energy goes to the battery, the EV charger, or the immersion heater first.
Is there a manual boost function for when we need extra hot water?
Yes — the eddi+ has a manual boost function accessible both from the device itself and from the myenergi app. You can trigger an immediate full-power boost regardless of surplus, drawing from the grid if necessary, and set it to run for a defined duration or until a set temperature is reached (when using a PT1000 sensor).