Mixergy X Direct 250L Cylinder
The Mixergy X Direct 250L Cylinder is a smart unvented direct hot water cylinder designed for all‑electric homes, combining unique volumetric heating with app‑based control to cut energy use and future‑proof the hot water system.
Product Description
This 250‑litre Mixergy X direct cylinder is heated by electric immersions and uses patented stratified (volumetric) heating to warm only the volume of water you need, delivering hot water up to 10 times faster than traditional cylinders. It integrates with solar PV, time‑of‑use tariffs and smart home platforms, allowing you to treat the cylinder as a low‑cost thermal battery while monitoring hot water levels and schedules from the Mixergy app.
Key Features
- Unique volumetric heating: Heats just the required portion of the tank from the top down, saving up to around 40% on hot water bills compared with conventional cylinders.
- Smart cylinder: Built‑in sensors and control gauge show live hot water percentage, with full app control for scheduling, boosting and usage insights.
- Direct electric: Electric immersions provide primary heating, ideal for gas‑free homes and off‑peak tariff optimisation.
- Renewable‑ready: Designed to connect to solar PV, EV tariffs and low‑carbon heat sources as the system evolves.
- High efficiency: Duplex stainless steel construction with 50mm foam insulation and ErP B/C‑class performance (model/year dependent).
- Long life: 25‑year vessel warranty (subject to Mixergy terms and correct installation).
Technical Specifications
- Model: Mixergy X Direct 250L – MX-250-ELE-582.
- Nominal capacity: 250 litres.
- Type: Unvented, direct electric smart hot water cylinder.
- Cylinder material: Duplex stainless steel.
- Insulation: 50mm CFC/HCFC‑free polyurethane foam.
- Electrical supply: 230–240 V~, 16 A.
- Immersion heater(s): 3 kW 1¾" BSP electric immersion(s) fitted as standard.
- Water connections: 22 mm compression connections.
- ErP rating: B/C (latest datasheet values for 250L direct standard diameter cylinder).
Dimensions & Weights
- Diameter: 582 mm standard diameter shell.
- Height: Approximately 1700 mm.
- Weight (empty): Approx. 51 kg.
- Weight (full): Approx. 301 kg.
Included Components
- Unvented installation kit including pressure reducing valve, check valve, pressure & temperature relief valve, expansion relief valve, tundish and expansion vessel with bracket and adaptors.
- 3 kW immersion heater(s).
- Control gauge and onboard electronics.
- Powerline‑to‑Ethernet adapter and Ethernet cable for internet connectivity (where supplied by pack).
- User documentation and installation instructions.
Applications & System Notes
- Ideal for medium to larger all‑electric homes seeking to minimise running costs and maximise PV/self‑consumption.
- Works with smart tariffs by pre‑heating at off‑peak times and using volumetric heating to avoid unnecessary storage.
- Can be paired with third‑party PV diverters via the Mixergy PV relay/switch kit, turning the cylinder into a thermal storage battery for surplus solar generation.
- Installation and commissioning must be carried out by a G3‑qualified installer in accordance with building regulations and Mixergy’s installation manual.
More Images
Mixergy X Direct 250L Cylinder
The Mixergy X Direct 250L Cylinder is a smart unvented direct hot water cylinder designed for all‑electric homes, combining unique volumetric heating with app‑based control to cut energy use and future‑proof the hot water system.
Product Description
This 250‑litre Mixergy X direct cylinder is heated by electric immersions and uses patented stratified (volumetric) heating to warm only the volume of water you need, delivering hot water up to 10 times faster than traditional cylinders. It integrates with solar PV, time‑of‑use tariffs and smart home platforms, allowing you to treat the cylinder as a low‑cost thermal battery while monitoring hot water levels and schedules from the Mixergy app.
Key Features
- Unique volumetric heating: Heats just the required portion of the tank from the top down, saving up to around 40% on hot water bills compared with conventional cylinders.
- Smart cylinder: Built‑in sensors and control gauge show live hot water percentage, with full app control for scheduling, boosting and usage insights.
- Direct electric: Electric immersions provide primary heating, ideal for gas‑free homes and off‑peak tariff optimisation.
- Renewable‑ready: Designed to connect to solar PV, EV tariffs and low‑carbon heat sources as the system evolves.
- High efficiency: Duplex stainless steel construction with 50mm foam insulation and ErP B/C‑class performance (model/year dependent).
- Long life: 25‑year vessel warranty (subject to Mixergy terms and correct installation).
Technical Specifications
- Model: Mixergy X Direct 250L – MX-250-ELE-582.
- Nominal capacity: 250 litres.
- Type: Unvented, direct electric smart hot water cylinder.
- Cylinder material: Duplex stainless steel.
- Insulation: 50mm CFC/HCFC‑free polyurethane foam.
- Electrical supply: 230–240 V~, 16 A.
- Immersion heater(s): 3 kW 1¾" BSP electric immersion(s) fitted as standard.
- Water connections: 22 mm compression connections.
- ErP rating: B/C (latest datasheet values for 250L direct standard diameter cylinder).
Dimensions & Weights
- Diameter: 582 mm standard diameter shell.
- Height: Approximately 1700 mm.
- Weight (empty): Approx. 51 kg.
- Weight (full): Approx. 301 kg.
Included Components
- Unvented installation kit including pressure reducing valve, check valve, pressure & temperature relief valve, expansion relief valve, tundish and expansion vessel with bracket and adaptors.
- 3 kW immersion heater(s).
- Control gauge and onboard electronics.
- Powerline‑to‑Ethernet adapter and Ethernet cable for internet connectivity (where supplied by pack).
- User documentation and installation instructions.
Applications & System Notes
- Ideal for medium to larger all‑electric homes seeking to minimise running costs and maximise PV/self‑consumption.
- Works with smart tariffs by pre‑heating at off‑peak times and using volumetric heating to avoid unnecessary storage.
- Can be paired with third‑party PV diverters via the Mixergy PV relay/switch kit, turning the cylinder into a thermal storage battery for surplus solar generation.
- Installation and commissioning must be carried out by a G3‑qualified installer in accordance with building regulations and Mixergy’s installation manual.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Mixergy X Direct 250L Cylinder is a smart unvented direct hot water cylinder designed for all‑electric homes, combining unique volumetric heating with app‑based control to cut energy use and future‑proof the hot water system.
Product Description
This 250‑litre Mixergy X direct cylinder is heated by electric immersions and uses patented stratified (volumetric) heating to warm only the volume of water you need, delivering hot water up to 10 times faster than traditional cylinders. It integrates with solar PV, time‑of‑use tariffs and smart home platforms, allowing you to treat the cylinder as a low‑cost thermal battery while monitoring hot water levels and schedules from the Mixergy app.
Key Features
- Unique volumetric heating: Heats just the required portion of the tank from the top down, saving up to around 40% on hot water bills compared with conventional cylinders.
- Smart cylinder: Built‑in sensors and control gauge show live hot water percentage, with full app control for scheduling, boosting and usage insights.
- Direct electric: Electric immersions provide primary heating, ideal for gas‑free homes and off‑peak tariff optimisation.
- Renewable‑ready: Designed to connect to solar PV, EV tariffs and low‑carbon heat sources as the system evolves.
- High efficiency: Duplex stainless steel construction with 50mm foam insulation and ErP B/C‑class performance (model/year dependent).
- Long life: 25‑year vessel warranty (subject to Mixergy terms and correct installation).
Technical Specifications
- Model: Mixergy X Direct 250L – MX-250-ELE-582.
- Nominal capacity: 250 litres.
- Type: Unvented, direct electric smart hot water cylinder.
- Cylinder material: Duplex stainless steel.
- Insulation: 50mm CFC/HCFC‑free polyurethane foam.
- Electrical supply: 230–240 V~, 16 A.
- Immersion heater(s): 3 kW 1¾" BSP electric immersion(s) fitted as standard.
- Water connections: 22 mm compression connections.
- ErP rating: B/C (latest datasheet values for 250L direct standard diameter cylinder).
Dimensions & Weights
- Diameter: 582 mm standard diameter shell.
- Height: Approximately 1700 mm.
- Weight (empty): Approx. 51 kg.
- Weight (full): Approx. 301 kg.
Included Components
- Unvented installation kit including pressure reducing valve, check valve, pressure & temperature relief valve, expansion relief valve, tundish and expansion vessel with bracket and adaptors.
- 3 kW immersion heater(s).
- Control gauge and onboard electronics.
- Powerline‑to‑Ethernet adapter and Ethernet cable for internet connectivity (where supplied by pack).
- User documentation and installation instructions.
Applications & System Notes
- Ideal for medium to larger all‑electric homes seeking to minimise running costs and maximise PV/self‑consumption.
- Works with smart tariffs by pre‑heating at off‑peak times and using volumetric heating to avoid unnecessary storage.
- Can be paired with third‑party PV diverters via the Mixergy PV relay/switch kit, turning the cylinder into a thermal storage battery for surplus solar generation.
- Installation and commissioning must be carried out by a G3‑qualified installer in accordance with building regulations and Mixergy’s installation manual.
