Livoltek iPower HES 5kW Hybrid All-in-One ESS Bundle – 5.12kWh to 25.6kWh Expandable Battery Storage System
Livoltek iPower HES 5kW Hybrid All-in-One ESS Bundle – 5.12kWh to 25.6kWh Expandable Battery Storage System
The Livoltek iPower HES-5000 All-in-One Energy Storage System is a wall-mounted, integrated solar storage solution that combines a 5 kW single-phase hybrid inverter with one to five LiFePO4 (LFP) battery modules in a single slim enclosure. Starting from 5.12 kWh and scalable to 25.6 kWh by stacking up to five BLF51-5 battery modules, this plug-and-play system is engineered for UK homes and small commercial premises seeking to maximise solar self-consumption, reduce grid dependency, and maintain critical backup power during outages — all without sacrificing wall space or aesthetics.
Built around a fanless, natural-cooling design, the iPower HES-5000 operates in near-silence, making it equally at home in a utility room or garage. A dedicated Wi-Fi/Bluetooth dongle comes included in the box, giving installers and homeowners immediate access to the My Livoltek cloud portal for real-time monitoring, scheduling, remote diagnostics and firmware updates — all at no extra cost.
The iPower HES-5000 uses passive thermal management with no moving parts — eliminating fan noise, reducing wear, and extending the operational lifespan of internal components. Rated for continuous operation from –10°C to +55°C, it suits UK garages and utility rooms year-round.
With a max. PV input of 7,500 Wp against a 5 kW AC output, the inverter supports up to 150% PV oversizing. Dual MPPTs handle strings from different roof orientations simultaneously, capturing more energy during partial-shade periods and early-morning or late-afternoon sun angles typical in the UK.
Start with a single 5.12 kWh BLF51-5 module and expand by stacking up to four additional units — reaching 25.6 kWh without rewiring the inverter. Each module has its own IP65 enclosure, 100 Ah nominal capacity, and a BMS communicating with the inverter via CAN bus for coordinated charge management.
The built-in BMS performs active cell balancing and real-time temperature monitoring across all modules. This keeps cells at matched voltage levels throughout the charge cycle, maximising usable capacity and targeting over 6,000 charge cycles — equivalent to more than 16 years of daily cycling at 90% DoD.
When a grid fault is detected, the system switches to Emergency Power Supply (EPS) mode in under 10 milliseconds — fast enough that most household appliances will not register the interruption. Backed-up loads connect via a dedicated EPS circuit output at 220 Vac / 50 Hz pure sine wave.
Schedule battery charging and discharging by tariff period to take full advantage of Octopus Agile, Economy 7, or any multi-rate tariff. Pair with the CT sensor (included) and optional smart meter to enable precise zero-export / export-limited operation — essential for DNO compliance in many UK installations.
The entire unit — inverter and battery modules — mounts on a single bracket assembly supplied in the box. Finished dimensions with one battery module are 415 × 1,380 × 165 mm, requiring as little as 300 mm clearance on all sides. A slim 165 mm depth keeps it flush to the wall in tight spaces.
Both on-grid and EPS outputs deliver a pure sinusoidal waveform with THDi below 3% under rated load — safe for sensitive electronics, variable-speed motors, and medical equipment. Power factor is adjustable from 0.8 leading to 0.8 lagging, providing compatibility with a wide range of UK load profiles.
| Parameter | Value |
|---|---|
| Model | Livoltek iPower HES-5000 (Hyper-5000) |
| Nominal AC Output Power | 5,000 W (single phase) |
| Nominal AC Output Current | 21.7 A |
| Max. PV Input Power | 7,500 Wp |
| Max. PV Input Voltage | 600 V |
| MPPT Voltage Range | 125 V – 550 V |
| Number of MPPTs / Strings per MPPT | 2 / 1 |
| Max. PV Current (per MPPT) | 14 A |
| Max. Short-Circuit Current (per MPPT) | 17.5 A |
| AC Input Voltage Range | 186 Vac – 290 Vac |
| AC Frequency | 50 Hz (or 60 Hz) |
| THDi @ Rated Power | < 3% |
| Max. Efficiency | 97.8% |
| Euro Efficiency | 97.4% |
| EPS Output Voltage / Frequency | 220 Vac / 50 Hz |
| EPS Continuous Output Power | 5 kVA @ 25°C |
| EPS Peak Power | 1.5× Pnom for 100 ms; 1.1× Pnom for 60 s |
| Grid / Off-Grid Switchover Time | < 10 ms |
| Output Waveform | Pure Sine Wave |
| Power Factor | ~1 (adjustable 0.8 leading – 0.8 lagging) |
| Max. Inverter Charge Current | 100 A |
| Max. Inverter Discharge Current | 100 A |
| Battery BMS Communication | CAN bus |
| Battery Type | LiFePO4 (LFP) — BLF51-5 |
| Battery Module Nominal Energy | 5.12 kWh (100 Ah @ 51.2 V) |
| Battery Voltage Range | 40 V – 58.4 V (nominal 51.2 V) |
| Max. Battery Charge Current | 50 A per module |
| Max. Battery Discharge Current | 100 A per module |
| Max. Depth of Discharge | 90% |
| Scalability | Up to 5 modules (25.6 kWh total) |
| Battery & Inverter IP Rating | IP65 |
| Operating Temperature | –10°C to +55°C |
| Dimensions (W × H × D) — per unit | 415 × 1,380 × 165 mm |
| Weight (inverter + 1 battery module) | 87 kg |
| Cooling Method | Natural convection (fanless) |
| Galvanic Isolation (Battery) | Yes |
| Communication Interfaces | Wi-Fi (dongle included), RS485, CAN, CT input |
| Monitoring App | My Livoltek (iOS & Android) — free cloud portal |
| Warranty | 10 years |
Each Livoltek All-in-One bundle ships as a complete, ready-to-install kit. Box contents (per the Quick Installation Guide) include:
Inverter unit · Inverter bracket · Battery module(s) (quantity matches bundle option selected) · Battery bracket · Middle cover & bottom bracket · Side frames ×2 · PV connectors (×2 or ×4 depending on MPPT config) · Wi-Fi/Bluetooth dongle · CT (Current Transformer) · Grid connector · EPS connector · Multi-COM connector · Battery power connectors ×2 · BMS connector · DRM connector · PE terminal · Expansion bolts ×10 · Screws ×16 · Quick installation guide & documentation.
| Bundle | Usable Storage (90% DoD) | Best For |
|---|---|---|
| 5 kW + 5.12 kWh | ~4.6 kWh | Smaller homes, entry-level solar storage, evening shifting |
| 5 kW + 10.24 kWh | ~9.2 kWh | Average UK home 3–4 bed, overnight coverage, Agile tariff |
| 5 kW + 15.36 kWh | ~13.8 kWh | Larger homes, EV charging buffer, extended backup |
| 5 kW + 20.48 kWh | ~18.4 kWh | High-consumption homes, small business, multi-rate tariff |
| 5 kW + 25.6 kWh | ~23 kWh | Maximum self-sufficiency, small commercial, near off-grid |
Can I add more battery modules after initial installation?
Does the system work during a grid power cut?
Is the system compatible with smart export tariffs and DNO export limits?
What cable sizes are required for installation?
How does cloud monitoring work and is there a subscription fee?
What is the expected battery lifespan and warranty coverage?
Original: $3,391.72
-65%$3,391.72
$1,187.10More Images
Livoltek iPower HES 5kW Hybrid All-in-One ESS Bundle – 5.12kWh to 25.6kWh Expandable Battery Storage System
The Livoltek iPower HES-5000 All-in-One Energy Storage System is a wall-mounted, integrated solar storage solution that combines a 5 kW single-phase hybrid inverter with one to five LiFePO4 (LFP) battery modules in a single slim enclosure. Starting from 5.12 kWh and scalable to 25.6 kWh by stacking up to five BLF51-5 battery modules, this plug-and-play system is engineered for UK homes and small commercial premises seeking to maximise solar self-consumption, reduce grid dependency, and maintain critical backup power during outages — all without sacrificing wall space or aesthetics.
Built around a fanless, natural-cooling design, the iPower HES-5000 operates in near-silence, making it equally at home in a utility room or garage. A dedicated Wi-Fi/Bluetooth dongle comes included in the box, giving installers and homeowners immediate access to the My Livoltek cloud portal for real-time monitoring, scheduling, remote diagnostics and firmware updates — all at no extra cost.
The iPower HES-5000 uses passive thermal management with no moving parts — eliminating fan noise, reducing wear, and extending the operational lifespan of internal components. Rated for continuous operation from –10°C to +55°C, it suits UK garages and utility rooms year-round.
With a max. PV input of 7,500 Wp against a 5 kW AC output, the inverter supports up to 150% PV oversizing. Dual MPPTs handle strings from different roof orientations simultaneously, capturing more energy during partial-shade periods and early-morning or late-afternoon sun angles typical in the UK.
Start with a single 5.12 kWh BLF51-5 module and expand by stacking up to four additional units — reaching 25.6 kWh without rewiring the inverter. Each module has its own IP65 enclosure, 100 Ah nominal capacity, and a BMS communicating with the inverter via CAN bus for coordinated charge management.
The built-in BMS performs active cell balancing and real-time temperature monitoring across all modules. This keeps cells at matched voltage levels throughout the charge cycle, maximising usable capacity and targeting over 6,000 charge cycles — equivalent to more than 16 years of daily cycling at 90% DoD.
When a grid fault is detected, the system switches to Emergency Power Supply (EPS) mode in under 10 milliseconds — fast enough that most household appliances will not register the interruption. Backed-up loads connect via a dedicated EPS circuit output at 220 Vac / 50 Hz pure sine wave.
Schedule battery charging and discharging by tariff period to take full advantage of Octopus Agile, Economy 7, or any multi-rate tariff. Pair with the CT sensor (included) and optional smart meter to enable precise zero-export / export-limited operation — essential for DNO compliance in many UK installations.
The entire unit — inverter and battery modules — mounts on a single bracket assembly supplied in the box. Finished dimensions with one battery module are 415 × 1,380 × 165 mm, requiring as little as 300 mm clearance on all sides. A slim 165 mm depth keeps it flush to the wall in tight spaces.
Both on-grid and EPS outputs deliver a pure sinusoidal waveform with THDi below 3% under rated load — safe for sensitive electronics, variable-speed motors, and medical equipment. Power factor is adjustable from 0.8 leading to 0.8 lagging, providing compatibility with a wide range of UK load profiles.
| Parameter | Value |
|---|---|
| Model | Livoltek iPower HES-5000 (Hyper-5000) |
| Nominal AC Output Power | 5,000 W (single phase) |
| Nominal AC Output Current | 21.7 A |
| Max. PV Input Power | 7,500 Wp |
| Max. PV Input Voltage | 600 V |
| MPPT Voltage Range | 125 V – 550 V |
| Number of MPPTs / Strings per MPPT | 2 / 1 |
| Max. PV Current (per MPPT) | 14 A |
| Max. Short-Circuit Current (per MPPT) | 17.5 A |
| AC Input Voltage Range | 186 Vac – 290 Vac |
| AC Frequency | 50 Hz (or 60 Hz) |
| THDi @ Rated Power | < 3% |
| Max. Efficiency | 97.8% |
| Euro Efficiency | 97.4% |
| EPS Output Voltage / Frequency | 220 Vac / 50 Hz |
| EPS Continuous Output Power | 5 kVA @ 25°C |
| EPS Peak Power | 1.5× Pnom for 100 ms; 1.1× Pnom for 60 s |
| Grid / Off-Grid Switchover Time | < 10 ms |
| Output Waveform | Pure Sine Wave |
| Power Factor | ~1 (adjustable 0.8 leading – 0.8 lagging) |
| Max. Inverter Charge Current | 100 A |
| Max. Inverter Discharge Current | 100 A |
| Battery BMS Communication | CAN bus |
| Battery Type | LiFePO4 (LFP) — BLF51-5 |
| Battery Module Nominal Energy | 5.12 kWh (100 Ah @ 51.2 V) |
| Battery Voltage Range | 40 V – 58.4 V (nominal 51.2 V) |
| Max. Battery Charge Current | 50 A per module |
| Max. Battery Discharge Current | 100 A per module |
| Max. Depth of Discharge | 90% |
| Scalability | Up to 5 modules (25.6 kWh total) |
| Battery & Inverter IP Rating | IP65 |
| Operating Temperature | –10°C to +55°C |
| Dimensions (W × H × D) — per unit | 415 × 1,380 × 165 mm |
| Weight (inverter + 1 battery module) | 87 kg |
| Cooling Method | Natural convection (fanless) |
| Galvanic Isolation (Battery) | Yes |
| Communication Interfaces | Wi-Fi (dongle included), RS485, CAN, CT input |
| Monitoring App | My Livoltek (iOS & Android) — free cloud portal |
| Warranty | 10 years |
Each Livoltek All-in-One bundle ships as a complete, ready-to-install kit. Box contents (per the Quick Installation Guide) include:
Inverter unit · Inverter bracket · Battery module(s) (quantity matches bundle option selected) · Battery bracket · Middle cover & bottom bracket · Side frames ×2 · PV connectors (×2 or ×4 depending on MPPT config) · Wi-Fi/Bluetooth dongle · CT (Current Transformer) · Grid connector · EPS connector · Multi-COM connector · Battery power connectors ×2 · BMS connector · DRM connector · PE terminal · Expansion bolts ×10 · Screws ×16 · Quick installation guide & documentation.
| Bundle | Usable Storage (90% DoD) | Best For |
|---|---|---|
| 5 kW + 5.12 kWh | ~4.6 kWh | Smaller homes, entry-level solar storage, evening shifting |
| 5 kW + 10.24 kWh | ~9.2 kWh | Average UK home 3–4 bed, overnight coverage, Agile tariff |
| 5 kW + 15.36 kWh | ~13.8 kWh | Larger homes, EV charging buffer, extended backup |
| 5 kW + 20.48 kWh | ~18.4 kWh | High-consumption homes, small business, multi-rate tariff |
| 5 kW + 25.6 kWh | ~23 kWh | Maximum self-sufficiency, small commercial, near off-grid |
Can I add more battery modules after initial installation?
Does the system work during a grid power cut?
Is the system compatible with smart export tariffs and DNO export limits?
What cable sizes are required for installation?
How does cloud monitoring work and is there a subscription fee?
What is the expected battery lifespan and warranty coverage?
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Livoltek iPower HES-5000 All-in-One Energy Storage System is a wall-mounted, integrated solar storage solution that combines a 5 kW single-phase hybrid inverter with one to five LiFePO4 (LFP) battery modules in a single slim enclosure. Starting from 5.12 kWh and scalable to 25.6 kWh by stacking up to five BLF51-5 battery modules, this plug-and-play system is engineered for UK homes and small commercial premises seeking to maximise solar self-consumption, reduce grid dependency, and maintain critical backup power during outages — all without sacrificing wall space or aesthetics.
Built around a fanless, natural-cooling design, the iPower HES-5000 operates in near-silence, making it equally at home in a utility room or garage. A dedicated Wi-Fi/Bluetooth dongle comes included in the box, giving installers and homeowners immediate access to the My Livoltek cloud portal for real-time monitoring, scheduling, remote diagnostics and firmware updates — all at no extra cost.
The iPower HES-5000 uses passive thermal management with no moving parts — eliminating fan noise, reducing wear, and extending the operational lifespan of internal components. Rated for continuous operation from –10°C to +55°C, it suits UK garages and utility rooms year-round.
With a max. PV input of 7,500 Wp against a 5 kW AC output, the inverter supports up to 150% PV oversizing. Dual MPPTs handle strings from different roof orientations simultaneously, capturing more energy during partial-shade periods and early-morning or late-afternoon sun angles typical in the UK.
Start with a single 5.12 kWh BLF51-5 module and expand by stacking up to four additional units — reaching 25.6 kWh without rewiring the inverter. Each module has its own IP65 enclosure, 100 Ah nominal capacity, and a BMS communicating with the inverter via CAN bus for coordinated charge management.
The built-in BMS performs active cell balancing and real-time temperature monitoring across all modules. This keeps cells at matched voltage levels throughout the charge cycle, maximising usable capacity and targeting over 6,000 charge cycles — equivalent to more than 16 years of daily cycling at 90% DoD.
When a grid fault is detected, the system switches to Emergency Power Supply (EPS) mode in under 10 milliseconds — fast enough that most household appliances will not register the interruption. Backed-up loads connect via a dedicated EPS circuit output at 220 Vac / 50 Hz pure sine wave.
Schedule battery charging and discharging by tariff period to take full advantage of Octopus Agile, Economy 7, or any multi-rate tariff. Pair with the CT sensor (included) and optional smart meter to enable precise zero-export / export-limited operation — essential for DNO compliance in many UK installations.
The entire unit — inverter and battery modules — mounts on a single bracket assembly supplied in the box. Finished dimensions with one battery module are 415 × 1,380 × 165 mm, requiring as little as 300 mm clearance on all sides. A slim 165 mm depth keeps it flush to the wall in tight spaces.
Both on-grid and EPS outputs deliver a pure sinusoidal waveform with THDi below 3% under rated load — safe for sensitive electronics, variable-speed motors, and medical equipment. Power factor is adjustable from 0.8 leading to 0.8 lagging, providing compatibility with a wide range of UK load profiles.
| Parameter | Value |
|---|---|
| Model | Livoltek iPower HES-5000 (Hyper-5000) |
| Nominal AC Output Power | 5,000 W (single phase) |
| Nominal AC Output Current | 21.7 A |
| Max. PV Input Power | 7,500 Wp |
| Max. PV Input Voltage | 600 V |
| MPPT Voltage Range | 125 V – 550 V |
| Number of MPPTs / Strings per MPPT | 2 / 1 |
| Max. PV Current (per MPPT) | 14 A |
| Max. Short-Circuit Current (per MPPT) | 17.5 A |
| AC Input Voltage Range | 186 Vac – 290 Vac |
| AC Frequency | 50 Hz (or 60 Hz) |
| THDi @ Rated Power | < 3% |
| Max. Efficiency | 97.8% |
| Euro Efficiency | 97.4% |
| EPS Output Voltage / Frequency | 220 Vac / 50 Hz |
| EPS Continuous Output Power | 5 kVA @ 25°C |
| EPS Peak Power | 1.5× Pnom for 100 ms; 1.1× Pnom for 60 s |
| Grid / Off-Grid Switchover Time | < 10 ms |
| Output Waveform | Pure Sine Wave |
| Power Factor | ~1 (adjustable 0.8 leading – 0.8 lagging) |
| Max. Inverter Charge Current | 100 A |
| Max. Inverter Discharge Current | 100 A |
| Battery BMS Communication | CAN bus |
| Battery Type | LiFePO4 (LFP) — BLF51-5 |
| Battery Module Nominal Energy | 5.12 kWh (100 Ah @ 51.2 V) |
| Battery Voltage Range | 40 V – 58.4 V (nominal 51.2 V) |
| Max. Battery Charge Current | 50 A per module |
| Max. Battery Discharge Current | 100 A per module |
| Max. Depth of Discharge | 90% |
| Scalability | Up to 5 modules (25.6 kWh total) |
| Battery & Inverter IP Rating | IP65 |
| Operating Temperature | –10°C to +55°C |
| Dimensions (W × H × D) — per unit | 415 × 1,380 × 165 mm |
| Weight (inverter + 1 battery module) | 87 kg |
| Cooling Method | Natural convection (fanless) |
| Galvanic Isolation (Battery) | Yes |
| Communication Interfaces | Wi-Fi (dongle included), RS485, CAN, CT input |
| Monitoring App | My Livoltek (iOS & Android) — free cloud portal |
| Warranty | 10 years |
Each Livoltek All-in-One bundle ships as a complete, ready-to-install kit. Box contents (per the Quick Installation Guide) include:
Inverter unit · Inverter bracket · Battery module(s) (quantity matches bundle option selected) · Battery bracket · Middle cover & bottom bracket · Side frames ×2 · PV connectors (×2 or ×4 depending on MPPT config) · Wi-Fi/Bluetooth dongle · CT (Current Transformer) · Grid connector · EPS connector · Multi-COM connector · Battery power connectors ×2 · BMS connector · DRM connector · PE terminal · Expansion bolts ×10 · Screws ×16 · Quick installation guide & documentation.
| Bundle | Usable Storage (90% DoD) | Best For |
|---|---|---|
| 5 kW + 5.12 kWh | ~4.6 kWh | Smaller homes, entry-level solar storage, evening shifting |
| 5 kW + 10.24 kWh | ~9.2 kWh | Average UK home 3–4 bed, overnight coverage, Agile tariff |
| 5 kW + 15.36 kWh | ~13.8 kWh | Larger homes, EV charging buffer, extended backup |
| 5 kW + 20.48 kWh | ~18.4 kWh | High-consumption homes, small business, multi-rate tariff |
| 5 kW + 25.6 kWh | ~23 kWh | Maximum self-sufficiency, small commercial, near off-grid |
