Honeywell Home T6360B1028 Room Thermostat - Mains Voltage Wired Room Thermostat with Heat Anticipator
Honeywell Home T6360B1028 Room Thermostat - Mains Voltage Wired Room Thermostat with Heat Anticipator
The Honeywell Home T6360B1028 is a mains voltage wired room thermostat built for reliable, automatic temperature control in domestic wet central heating systems. With a dual diaphragm temperature sensing element, a built-in heat anticipator for ±0.5 °C accuracy, and RFI suppression, this thermostat is the go-to choice for engineers wanting dependable on/off control without complexity. It directly switches a circulating pump or boiler, operates spring-return and motor open/close zone valves, and can handle electrical heating loads up to 10 A (resistive) — all from a compact 84 × 84 × 37 mm wall-mount unit. The T6360B1028 is also Boiler Plus compliant when used alongside a timer or programmer on system boilers.
This thermostat operates at 230 V AC mains voltage. Installation must be carried out by a qualified electrician or competent heating engineer in accordance with the current edition of the IET Wiring Regulations (BS 7671). Ensure the circuit is isolated and proved dead before working on terminals.
Do not position the thermostat where it is exposed to direct sunlight, extraneous heat sources, or draughts. False readings from these sources will prevent the thermostat from maintaining accurate room temperature. An interior wall at approximately 1.5 m height, away from windows and radiators, is the recommended location.
The T6360B1028 is Boiler Plus compliant for system boilers when installed alongside a compatible programmer or timer. This satisfies the time and temperature control requirements of Part L of the Building Regulations for England.
The dual diaphragm temperature sensing element responds accurately across all load types and applications. Combined with the built-in heat anticipator, it achieves a tight control accuracy of ±0.5 °C at a 3 K/hour rate of temperature change — reducing temperature overshoot and improving comfort.
The single pole, double throw (SPDT) switching action provides changeover contacts, making the T6360B1028 equally suited to heating and cooling applications. Terminal 3 handles up to 10 A resistive / 3 A inductive; Terminal 4 supports 6 A resistive / 2 A inductive loads.
An integrated RFI (radio-frequency interference) suppressor prevents switching noise from the thermostat contacts from disrupting other electronic equipment in the property — important in modern homes with smart devices, Wi-Fi networks, and digital audio equipment nearby.
The T6360B1028 is double insulated to Class II, meaning no earth wire is needed for safe operation. This simplifies installation, particularly in older properties where an earth conductor may not be present at the thermostat position.
Suitable for surface mounting directly onto the wall or for fitting to a standard flush switch box. Fixing screws for both methods are supplied in the box. The slim 37 mm depth keeps the unit unobtrusive wherever it is installed.
Improved, easy-to-wire terminals with built-in conductor clamps grip cable conductors securely and resist pull-out — reducing the risk of a loose connection causing intermittent heating faults over the life of the installation.
| Manufacturer Part Number | T6360B1028 |
| Voltage Rating | 230 V AC ±10%, 50/60 Hz |
| Switch Type | Single Pole, Double Throw (SPDT) — changeover contacts |
| Switch Rating — Terminal 3 | 10 A resistive / 3 A inductive |
| Switch Rating — Terminal 4 | 6 A resistive / 2 A inductive |
| Temperature Setpoint Range | 10 °C to 30 °C |
| Control Accuracy | ±0.5 °C at 3 K/hour (with anticipator) |
| Sensing Element | Dual diaphragm |
| Insulation Class | Class II (double insulated — no earth required) |
| ErP Rating | Class I |
| Dimensions (H × W × D) | 84 mm × 84 mm × 37 mm |
| Weight | 0.19 kg |
| Colour | White |
| Mounting | Surface or flush switch box |
| Storage Temperature | −20 °C to +55 °C |
| Humidity | 10–90% RH, non-condensing |
| Standards / Compliance | CE marked; EN60730-1, EN55014-1, EN55014-2; Boiler Plus (system boilers with programmer/timer) |
| Manufacturer | Honeywell Home (Resideo) |
More Images
Honeywell Home T6360B1028 Room Thermostat - Mains Voltage Wired Room Thermostat with Heat Anticipator
The Honeywell Home T6360B1028 is a mains voltage wired room thermostat built for reliable, automatic temperature control in domestic wet central heating systems. With a dual diaphragm temperature sensing element, a built-in heat anticipator for ±0.5 °C accuracy, and RFI suppression, this thermostat is the go-to choice for engineers wanting dependable on/off control without complexity. It directly switches a circulating pump or boiler, operates spring-return and motor open/close zone valves, and can handle electrical heating loads up to 10 A (resistive) — all from a compact 84 × 84 × 37 mm wall-mount unit. The T6360B1028 is also Boiler Plus compliant when used alongside a timer or programmer on system boilers.
This thermostat operates at 230 V AC mains voltage. Installation must be carried out by a qualified electrician or competent heating engineer in accordance with the current edition of the IET Wiring Regulations (BS 7671). Ensure the circuit is isolated and proved dead before working on terminals.
Do not position the thermostat where it is exposed to direct sunlight, extraneous heat sources, or draughts. False readings from these sources will prevent the thermostat from maintaining accurate room temperature. An interior wall at approximately 1.5 m height, away from windows and radiators, is the recommended location.
The T6360B1028 is Boiler Plus compliant for system boilers when installed alongside a compatible programmer or timer. This satisfies the time and temperature control requirements of Part L of the Building Regulations for England.
The dual diaphragm temperature sensing element responds accurately across all load types and applications. Combined with the built-in heat anticipator, it achieves a tight control accuracy of ±0.5 °C at a 3 K/hour rate of temperature change — reducing temperature overshoot and improving comfort.
The single pole, double throw (SPDT) switching action provides changeover contacts, making the T6360B1028 equally suited to heating and cooling applications. Terminal 3 handles up to 10 A resistive / 3 A inductive; Terminal 4 supports 6 A resistive / 2 A inductive loads.
An integrated RFI (radio-frequency interference) suppressor prevents switching noise from the thermostat contacts from disrupting other electronic equipment in the property — important in modern homes with smart devices, Wi-Fi networks, and digital audio equipment nearby.
The T6360B1028 is double insulated to Class II, meaning no earth wire is needed for safe operation. This simplifies installation, particularly in older properties where an earth conductor may not be present at the thermostat position.
Suitable for surface mounting directly onto the wall or for fitting to a standard flush switch box. Fixing screws for both methods are supplied in the box. The slim 37 mm depth keeps the unit unobtrusive wherever it is installed.
Improved, easy-to-wire terminals with built-in conductor clamps grip cable conductors securely and resist pull-out — reducing the risk of a loose connection causing intermittent heating faults over the life of the installation.
| Manufacturer Part Number | T6360B1028 |
| Voltage Rating | 230 V AC ±10%, 50/60 Hz |
| Switch Type | Single Pole, Double Throw (SPDT) — changeover contacts |
| Switch Rating — Terminal 3 | 10 A resistive / 3 A inductive |
| Switch Rating — Terminal 4 | 6 A resistive / 2 A inductive |
| Temperature Setpoint Range | 10 °C to 30 °C |
| Control Accuracy | ±0.5 °C at 3 K/hour (with anticipator) |
| Sensing Element | Dual diaphragm |
| Insulation Class | Class II (double insulated — no earth required) |
| ErP Rating | Class I |
| Dimensions (H × W × D) | 84 mm × 84 mm × 37 mm |
| Weight | 0.19 kg |
| Colour | White |
| Mounting | Surface or flush switch box |
| Storage Temperature | −20 °C to +55 °C |
| Humidity | 10–90% RH, non-condensing |
| Standards / Compliance | CE marked; EN60730-1, EN55014-1, EN55014-2; Boiler Plus (system boilers with programmer/timer) |
| Manufacturer | Honeywell Home (Resideo) |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Honeywell Home T6360B1028 is a mains voltage wired room thermostat built for reliable, automatic temperature control in domestic wet central heating systems. With a dual diaphragm temperature sensing element, a built-in heat anticipator for ±0.5 °C accuracy, and RFI suppression, this thermostat is the go-to choice for engineers wanting dependable on/off control without complexity. It directly switches a circulating pump or boiler, operates spring-return and motor open/close zone valves, and can handle electrical heating loads up to 10 A (resistive) — all from a compact 84 × 84 × 37 mm wall-mount unit. The T6360B1028 is also Boiler Plus compliant when used alongside a timer or programmer on system boilers.
This thermostat operates at 230 V AC mains voltage. Installation must be carried out by a qualified electrician or competent heating engineer in accordance with the current edition of the IET Wiring Regulations (BS 7671). Ensure the circuit is isolated and proved dead before working on terminals.
Do not position the thermostat where it is exposed to direct sunlight, extraneous heat sources, or draughts. False readings from these sources will prevent the thermostat from maintaining accurate room temperature. An interior wall at approximately 1.5 m height, away from windows and radiators, is the recommended location.
The T6360B1028 is Boiler Plus compliant for system boilers when installed alongside a compatible programmer or timer. This satisfies the time and temperature control requirements of Part L of the Building Regulations for England.
The dual diaphragm temperature sensing element responds accurately across all load types and applications. Combined with the built-in heat anticipator, it achieves a tight control accuracy of ±0.5 °C at a 3 K/hour rate of temperature change — reducing temperature overshoot and improving comfort.
The single pole, double throw (SPDT) switching action provides changeover contacts, making the T6360B1028 equally suited to heating and cooling applications. Terminal 3 handles up to 10 A resistive / 3 A inductive; Terminal 4 supports 6 A resistive / 2 A inductive loads.
An integrated RFI (radio-frequency interference) suppressor prevents switching noise from the thermostat contacts from disrupting other electronic equipment in the property — important in modern homes with smart devices, Wi-Fi networks, and digital audio equipment nearby.
The T6360B1028 is double insulated to Class II, meaning no earth wire is needed for safe operation. This simplifies installation, particularly in older properties where an earth conductor may not be present at the thermostat position.
Suitable for surface mounting directly onto the wall or for fitting to a standard flush switch box. Fixing screws for both methods are supplied in the box. The slim 37 mm depth keeps the unit unobtrusive wherever it is installed.
Improved, easy-to-wire terminals with built-in conductor clamps grip cable conductors securely and resist pull-out — reducing the risk of a loose connection causing intermittent heating faults over the life of the installation.
| Manufacturer Part Number | T6360B1028 |
| Voltage Rating | 230 V AC ±10%, 50/60 Hz |
| Switch Type | Single Pole, Double Throw (SPDT) — changeover contacts |
| Switch Rating — Terminal 3 | 10 A resistive / 3 A inductive |
| Switch Rating — Terminal 4 | 6 A resistive / 2 A inductive |
| Temperature Setpoint Range | 10 °C to 30 °C |
| Control Accuracy | ±0.5 °C at 3 K/hour (with anticipator) |
| Sensing Element | Dual diaphragm |
| Insulation Class | Class II (double insulated — no earth required) |
| ErP Rating | Class I |
| Dimensions (H × W × D) | 84 mm × 84 mm × 37 mm |
| Weight | 0.19 kg |
| Colour | White |
| Mounting | Surface or flush switch box |
| Storage Temperature | −20 °C to +55 °C |
| Humidity | 10–90% RH, non-condensing |
| Standards / Compliance | CE marked; EN60730-1, EN55014-1, EN55014-2; Boiler Plus (system boilers with programmer/timer) |
| Manufacturer | Honeywell Home (Resideo) |
