Ferroli Bravo 30 Litre 3kW Over-Sink Unvented Electric Water Heater SN30VE3.0 c/w Expansion Kit
Ferroli Bravo 30 Litre 3kW Over-Sink Unvented Electric Water Heater SN30VE3.0 c/w Expansion Kit
The Ferroli Bravo 30L (MPN: SN30VE3.0) is a 30-litre unvented over-sink electric storage water heater, supplied complete with a G3 expansion kit and factory-fitted T&P relief valve — the largest model in the Ferroli Bravo point-of-use range and the only one in the series that includes a T&P valve as standard. Powered by a 3 kW element at 240 V and rated IPX4, it delivers a substantial store of mains-pressure hot water for kitchens, utility rooms, workshops, outbuildings, and commercial washroom applications where a full cylinder installation is impractical. It ships with a reinforced hanging bracket, built-in cable, and 2-year warranty.
The Bravo 30L is an unvented hot water storage appliance. Installation must be carried out by a G3 accredited competent person in accordance with Building Regulations Approved Document G3 (England & Wales) or equivalent Scottish / Northern Irish regulations. All electrical connections must be made by a qualified electrician to current IET Wiring Regulations.
The SN30VE3.0 is an over-sink (above-sink) model only — it is not available in an under-sink configuration at this capacity. Cold water enters from above and hot water is discharged downward to the tap. As an unvented unit storing water at mains pressure, it is compatible with standard shut-off taps and thermostatic mixer taps — no open-outlet spout tap is required.
The Bravo 30L is the only model in the Bravo series to include a factory-fitted Temperature & Pressure relief valve as standard. On the 10L and 15L models, the T&P valve is not included. This reflects the larger stored volume and associated unvented safety requirements at 30 litres — a further reason why G3 competency is essential for installation of this model.
The SN30VE3.0 ships as a complete, G3-compliant package. The expansion kit and a factory-fitted T&P (Temperature & Pressure) relief valve are included as standard — the only Bravo model to feature a factory-fitted T&P valve. This simplifies procurement: no separate unvented component kit required for this unit.
With 30 litres stored at mains pressure, the Bravo 30L provides substantially more continuous hot water capacity than the 10L and 15L Bravo models — supporting prolonged sink use, light commercial hand-washing demands, or kitchen applications where larger volumes of hot water are needed without a full unvented cylinder installation.
The 3 kW heating element at 240 V — rated higher than the 2 kW elements in the 10L and 15L models — delivers faster heat recovery after draw-off, maintaining a ready supply of hot water during periods of sustained use. Suitable for connection to a dedicated 13 A fused spur on a standard ring main.
IPX4 splash-proof protection means the Bravo 30L can be installed in bathrooms, cloakrooms, utility rooms, and other splash-risk environments, subject to current IET Wiring Regulations zone requirements (BS 7671). The shockproof ABS outer casing provides robust protection in commercial and industrial installation environments.
A reinforced hanging bracket is supplied as standard for secure wall-mounting above the sink. The bracket is engineered to take the full weight of the unit when filled — important at 30 litres where the loaded weight is considerably more than the compact 10L and 15L models. Ensure the wall structure is adequate for the filled weight before installation.
Rust-free internal construction and a shockproof ABS outer casing give the Bravo 30L long service life in demanding environments including workshops, outbuildings, and commercial premises. A user-adjustable thermostat allows temperature to be set to preference. The pre-fitted cable (without plug) is ready for connection to a fused spur by a qualified electrician.
The Bravo 30L can be installed wherever there is access to a cold-water supply and a power source — not only above a kitchen or bathroom sink, but also in utility rooms, outbuildings, garage workshops, garden rooms, holiday lets, caravans, and commercial premises requiring a local, self-contained hot water supply without running pipework from a distant cylinder.
The Bravo 30L shares the same build quality, ABS casing, and mounting system as the 10L and 15L Bravo models, allowing a consistent Ferroli specification across multiple washroom locations in the same building. The 30L is the only Bravo available solely as an over-sink model; 10L and 15L are available in both under-sink and over-sink configurations.
- Bravo 30L over-sink water heater (SN30VE3.0)
- G3 expansion kit (unvented safety components)
- Factory-fitted T&P (Temperature & Pressure) relief valve — only Bravo model with this fitted as standard
- Reinforced hanging bracket
- Pre-fitted electrical cable (without plug)
Note: an open-outlet (swivel spout) tap is NOT required — the Bravo 30L is unvented (mains pressure) and is compatible with standard shut-off and thermostatic mixer taps.
| Parameter | SN30VE3.0 Specification |
|---|---|
| MPN | SN30VE3.0 |
| Type | Unvented storage — over-sink point-of-use |
| Capacity | 30 litres |
| Power | 3 kW @ 240 V AC |
| IP rating | IPX4 |
| Casing material | Shockproof ABS |
| Installation orientation | Over-sink only (cold in from above, hot out downward) |
| Pressure type | Unvented — mains pressure |
| T&P relief valve | Factory-fitted (unique to 30L in Bravo range) |
| G3 expansion kit included | Yes — supplied as standard |
| G3 certification required for installation | Yes — unvented unit |
| Compatible tap types | Standard shut-off taps; thermostatic mixer taps (no open-outlet tap required) |
| Temperature adjustment | Yes — adjustable thermostat |
| Hanging bracket | Reinforced bracket supplied |
| Built-in cable | Yes (without plug) |
| Internal construction | Rust-free |
| Warranty | 2 years |
| Ferroli UK support | T: 0330 205 0005 · [email protected] |
| Model | Capacity | Power | Orientations | T&P valve | G3 kit included |
|---|---|---|---|---|---|
| SN10SVE2.0 / SN10SVE2.0U | 10 L | 2 kW | Over-sink & Under-sink | Not fitted | No |
| SN15SVE2.5 / SN15SVE2.5U | 15 L | 2.5 kW | Over-sink & Under-sink | Not fitted | No |
| SN30VE3.0 ← this listing | 30 L | 3 kW | Over-sink only | Factory-fitted | Yes |
More Images
Ferroli Bravo 30 Litre 3kW Over-Sink Unvented Electric Water Heater SN30VE3.0 c/w Expansion Kit
The Ferroli Bravo 30L (MPN: SN30VE3.0) is a 30-litre unvented over-sink electric storage water heater, supplied complete with a G3 expansion kit and factory-fitted T&P relief valve — the largest model in the Ferroli Bravo point-of-use range and the only one in the series that includes a T&P valve as standard. Powered by a 3 kW element at 240 V and rated IPX4, it delivers a substantial store of mains-pressure hot water for kitchens, utility rooms, workshops, outbuildings, and commercial washroom applications where a full cylinder installation is impractical. It ships with a reinforced hanging bracket, built-in cable, and 2-year warranty.
The Bravo 30L is an unvented hot water storage appliance. Installation must be carried out by a G3 accredited competent person in accordance with Building Regulations Approved Document G3 (England & Wales) or equivalent Scottish / Northern Irish regulations. All electrical connections must be made by a qualified electrician to current IET Wiring Regulations.
The SN30VE3.0 is an over-sink (above-sink) model only — it is not available in an under-sink configuration at this capacity. Cold water enters from above and hot water is discharged downward to the tap. As an unvented unit storing water at mains pressure, it is compatible with standard shut-off taps and thermostatic mixer taps — no open-outlet spout tap is required.
The Bravo 30L is the only model in the Bravo series to include a factory-fitted Temperature & Pressure relief valve as standard. On the 10L and 15L models, the T&P valve is not included. This reflects the larger stored volume and associated unvented safety requirements at 30 litres — a further reason why G3 competency is essential for installation of this model.
The SN30VE3.0 ships as a complete, G3-compliant package. The expansion kit and a factory-fitted T&P (Temperature & Pressure) relief valve are included as standard — the only Bravo model to feature a factory-fitted T&P valve. This simplifies procurement: no separate unvented component kit required for this unit.
With 30 litres stored at mains pressure, the Bravo 30L provides substantially more continuous hot water capacity than the 10L and 15L Bravo models — supporting prolonged sink use, light commercial hand-washing demands, or kitchen applications where larger volumes of hot water are needed without a full unvented cylinder installation.
The 3 kW heating element at 240 V — rated higher than the 2 kW elements in the 10L and 15L models — delivers faster heat recovery after draw-off, maintaining a ready supply of hot water during periods of sustained use. Suitable for connection to a dedicated 13 A fused spur on a standard ring main.
IPX4 splash-proof protection means the Bravo 30L can be installed in bathrooms, cloakrooms, utility rooms, and other splash-risk environments, subject to current IET Wiring Regulations zone requirements (BS 7671). The shockproof ABS outer casing provides robust protection in commercial and industrial installation environments.
A reinforced hanging bracket is supplied as standard for secure wall-mounting above the sink. The bracket is engineered to take the full weight of the unit when filled — important at 30 litres where the loaded weight is considerably more than the compact 10L and 15L models. Ensure the wall structure is adequate for the filled weight before installation.
Rust-free internal construction and a shockproof ABS outer casing give the Bravo 30L long service life in demanding environments including workshops, outbuildings, and commercial premises. A user-adjustable thermostat allows temperature to be set to preference. The pre-fitted cable (without plug) is ready for connection to a fused spur by a qualified electrician.
The Bravo 30L can be installed wherever there is access to a cold-water supply and a power source — not only above a kitchen or bathroom sink, but also in utility rooms, outbuildings, garage workshops, garden rooms, holiday lets, caravans, and commercial premises requiring a local, self-contained hot water supply without running pipework from a distant cylinder.
The Bravo 30L shares the same build quality, ABS casing, and mounting system as the 10L and 15L Bravo models, allowing a consistent Ferroli specification across multiple washroom locations in the same building. The 30L is the only Bravo available solely as an over-sink model; 10L and 15L are available in both under-sink and over-sink configurations.
- Bravo 30L over-sink water heater (SN30VE3.0)
- G3 expansion kit (unvented safety components)
- Factory-fitted T&P (Temperature & Pressure) relief valve — only Bravo model with this fitted as standard
- Reinforced hanging bracket
- Pre-fitted electrical cable (without plug)
Note: an open-outlet (swivel spout) tap is NOT required — the Bravo 30L is unvented (mains pressure) and is compatible with standard shut-off and thermostatic mixer taps.
| Parameter | SN30VE3.0 Specification |
|---|---|
| MPN | SN30VE3.0 |
| Type | Unvented storage — over-sink point-of-use |
| Capacity | 30 litres |
| Power | 3 kW @ 240 V AC |
| IP rating | IPX4 |
| Casing material | Shockproof ABS |
| Installation orientation | Over-sink only (cold in from above, hot out downward) |
| Pressure type | Unvented — mains pressure |
| T&P relief valve | Factory-fitted (unique to 30L in Bravo range) |
| G3 expansion kit included | Yes — supplied as standard |
| G3 certification required for installation | Yes — unvented unit |
| Compatible tap types | Standard shut-off taps; thermostatic mixer taps (no open-outlet tap required) |
| Temperature adjustment | Yes — adjustable thermostat |
| Hanging bracket | Reinforced bracket supplied |
| Built-in cable | Yes (without plug) |
| Internal construction | Rust-free |
| Warranty | 2 years |
| Ferroli UK support | T: 0330 205 0005 · [email protected] |
| Model | Capacity | Power | Orientations | T&P valve | G3 kit included |
|---|---|---|---|---|---|
| SN10SVE2.0 / SN10SVE2.0U | 10 L | 2 kW | Over-sink & Under-sink | Not fitted | No |
| SN15SVE2.5 / SN15SVE2.5U | 15 L | 2.5 kW | Over-sink & Under-sink | Not fitted | No |
| SN30VE3.0 ← this listing | 30 L | 3 kW | Over-sink only | Factory-fitted | Yes |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Ferroli Bravo 30L (MPN: SN30VE3.0) is a 30-litre unvented over-sink electric storage water heater, supplied complete with a G3 expansion kit and factory-fitted T&P relief valve — the largest model in the Ferroli Bravo point-of-use range and the only one in the series that includes a T&P valve as standard. Powered by a 3 kW element at 240 V and rated IPX4, it delivers a substantial store of mains-pressure hot water for kitchens, utility rooms, workshops, outbuildings, and commercial washroom applications where a full cylinder installation is impractical. It ships with a reinforced hanging bracket, built-in cable, and 2-year warranty.
The Bravo 30L is an unvented hot water storage appliance. Installation must be carried out by a G3 accredited competent person in accordance with Building Regulations Approved Document G3 (England & Wales) or equivalent Scottish / Northern Irish regulations. All electrical connections must be made by a qualified electrician to current IET Wiring Regulations.
The SN30VE3.0 is an over-sink (above-sink) model only — it is not available in an under-sink configuration at this capacity. Cold water enters from above and hot water is discharged downward to the tap. As an unvented unit storing water at mains pressure, it is compatible with standard shut-off taps and thermostatic mixer taps — no open-outlet spout tap is required.
The Bravo 30L is the only model in the Bravo series to include a factory-fitted Temperature & Pressure relief valve as standard. On the 10L and 15L models, the T&P valve is not included. This reflects the larger stored volume and associated unvented safety requirements at 30 litres — a further reason why G3 competency is essential for installation of this model.
The SN30VE3.0 ships as a complete, G3-compliant package. The expansion kit and a factory-fitted T&P (Temperature & Pressure) relief valve are included as standard — the only Bravo model to feature a factory-fitted T&P valve. This simplifies procurement: no separate unvented component kit required for this unit.
With 30 litres stored at mains pressure, the Bravo 30L provides substantially more continuous hot water capacity than the 10L and 15L Bravo models — supporting prolonged sink use, light commercial hand-washing demands, or kitchen applications where larger volumes of hot water are needed without a full unvented cylinder installation.
The 3 kW heating element at 240 V — rated higher than the 2 kW elements in the 10L and 15L models — delivers faster heat recovery after draw-off, maintaining a ready supply of hot water during periods of sustained use. Suitable for connection to a dedicated 13 A fused spur on a standard ring main.
IPX4 splash-proof protection means the Bravo 30L can be installed in bathrooms, cloakrooms, utility rooms, and other splash-risk environments, subject to current IET Wiring Regulations zone requirements (BS 7671). The shockproof ABS outer casing provides robust protection in commercial and industrial installation environments.
A reinforced hanging bracket is supplied as standard for secure wall-mounting above the sink. The bracket is engineered to take the full weight of the unit when filled — important at 30 litres where the loaded weight is considerably more than the compact 10L and 15L models. Ensure the wall structure is adequate for the filled weight before installation.
Rust-free internal construction and a shockproof ABS outer casing give the Bravo 30L long service life in demanding environments including workshops, outbuildings, and commercial premises. A user-adjustable thermostat allows temperature to be set to preference. The pre-fitted cable (without plug) is ready for connection to a fused spur by a qualified electrician.
The Bravo 30L can be installed wherever there is access to a cold-water supply and a power source — not only above a kitchen or bathroom sink, but also in utility rooms, outbuildings, garage workshops, garden rooms, holiday lets, caravans, and commercial premises requiring a local, self-contained hot water supply without running pipework from a distant cylinder.
The Bravo 30L shares the same build quality, ABS casing, and mounting system as the 10L and 15L Bravo models, allowing a consistent Ferroli specification across multiple washroom locations in the same building. The 30L is the only Bravo available solely as an over-sink model; 10L and 15L are available in both under-sink and over-sink configurations.
- Bravo 30L over-sink water heater (SN30VE3.0)
- G3 expansion kit (unvented safety components)
- Factory-fitted T&P (Temperature & Pressure) relief valve — only Bravo model with this fitted as standard
- Reinforced hanging bracket
- Pre-fitted electrical cable (without plug)
Note: an open-outlet (swivel spout) tap is NOT required — the Bravo 30L is unvented (mains pressure) and is compatible with standard shut-off and thermostatic mixer taps.
| Parameter | SN30VE3.0 Specification |
|---|---|
| MPN | SN30VE3.0 |
| Type | Unvented storage — over-sink point-of-use |
| Capacity | 30 litres |
| Power | 3 kW @ 240 V AC |
| IP rating | IPX4 |
| Casing material | Shockproof ABS |
| Installation orientation | Over-sink only (cold in from above, hot out downward) |
| Pressure type | Unvented — mains pressure |
| T&P relief valve | Factory-fitted (unique to 30L in Bravo range) |
| G3 expansion kit included | Yes — supplied as standard |
| G3 certification required for installation | Yes — unvented unit |
| Compatible tap types | Standard shut-off taps; thermostatic mixer taps (no open-outlet tap required) |
| Temperature adjustment | Yes — adjustable thermostat |
| Hanging bracket | Reinforced bracket supplied |
| Built-in cable | Yes (without plug) |
| Internal construction | Rust-free |
| Warranty | 2 years |
| Ferroli UK support | T: 0330 205 0005 · [email protected] |
| Model | Capacity | Power | Orientations | T&P valve | G3 kit included |
|---|---|---|---|---|---|
| SN10SVE2.0 / SN10SVE2.0U | 10 L | 2 kW | Over-sink & Under-sink | Not fitted | No |
| SN15SVE2.5 / SN15SVE2.5U | 15 L | 2.5 kW | Over-sink & Under-sink | Not fitted | No |
| SN30VE3.0 ← this listing | 30 L | 3 kW | Over-sink only | Factory-fitted | Yes |