✨ New Arrivals Just Dropped!Explore
HomeStore
Enviroguard PVC Coated Solar Panel Bird Deterrent Mesh Kit 30m — 200 Black Clips & 20 SS Corner Ties
Enviroguard PVC Coated Solar Panel Bird Deterrent Mesh Kit 30m — 200 Black Clips & 20 SS Corner Ties
The Enviroguard Solar Panel Bird Deterrent Mesh Kit is a complete solution for excluding pigeons and other birds from nesting under rooftop solar panels — without drilling into the panel frame. The kit includes a 30-metre roll of black PVC-coated galvanised welded mesh, 200 SolarGuard fixing clips that grip the panel frame edge, and 20 stainless steel corner ties for secure joining at corners and straight runs. Everything needed for a professional, warranty-safe installation is included in one pack.
30 m
Mesh roll length
200 mm
Roll width
200
Black fixing clips
20
SS corner ties
No drilling
Warranty-safe fit
ℹ Kit Contents at a Glance — 1× 30 m PVC-coated galvanised welded mesh roll (200 mm wide) · 200× SolarGuard 30 mm black fixing clips · 20× stainless steel ball-lock corner ties (7.9 mm × 200 mm)
Product Details
| Brand | Enviroguard |
| Part Number | EG-BIRD-MESH-BLK-KIT |
| Mesh — Roll Length | 30 m |
| Mesh — Roll Width | 200 mm |
| Mesh — Aperture Size | 25 mm × 12.5 mm (1″ × ½″) |
| Mesh — Wire Gauge | 16 gauge / 1.5 mm diameter |
| Mesh — Construction | Hot-dipped galvanised welded steel wire, PVC coated black |
| Fixing Clips — Qty | 200 × SolarGuard 30 mm black clips (EG-FASTEN-CLIP-B) |
| Fixing Clips — Features | Clip-on to panel frame edge, no drilling, patented non-releasable locking, infinite adjustment |
| Corner Ties — Qty | 20 × stainless steel ball-lock ties |
| Corner Ties — Dimensions | 7.9 mm × 200 mm |
| Corner Ties — Features | Stainless steel, self-locking ball mechanism, fireproof, high chemical resistance, suitable for straight and corner joints |
Frequently Asked Questions
Will this void my solar panel warranty?
No. The SolarGuard fixing clips clip onto the outer edge of the panel frame — no screws, no drilling, and no adhesives are applied to the panel itself. This makes it the warranty-safe method recommended for most residential and commercial rooftop solar installations.
How many panels will this kit cover?
Coverage depends on panel size and array layout. The 200 mm wide mesh is pre-sized to fit directly between the panel frame underside and the roof surface on most standard residential panels without cutting. A typical 6-panel (2×3) array with 1.7 m-tall panels uses roughly 10–12 m of mesh per row. The 30 m roll is well-suited to arrays of 10–14 panels, subject to layout.
How are the clips installed?
Slide each clip onto the lip of the solar panel frame, spacing them approximately every 450 mm around the perimeter. The mesh is then pressed into the clips, which lock it securely in place. The patented non-releasable locking feature means the clips cannot be pulled off by birds or wind once engaged. No special tools are required.
What are the corner ties used for?
The 20 stainless steel ball-lock corner ties are used to join sections of mesh at corners and along straight runs — for example when wrapping around the end of a panel row or joining two lengths of mesh. The self-locking ball mechanism allows the tie to be tightened to any length and will not release under tension. They are fireproof and highly chemical-resistant, suitable for long-term outdoor use.
$224.05
Enviroguard PVC Coated Solar Panel Bird Deterrent Mesh Kit 30m — 200 Black Clips & 20 SS Corner Ties—
$224.05
More Images
Enviroguard PVC Coated Solar Panel Bird Deterrent Mesh Kit 30m — 200 Black Clips & 20 SS Corner Ties
The Enviroguard Solar Panel Bird Deterrent Mesh Kit is a complete solution for excluding pigeons and other birds from nesting under rooftop solar panels — without drilling into the panel frame. The kit includes a 30-metre roll of black PVC-coated galvanised welded mesh, 200 SolarGuard fixing clips that grip the panel frame edge, and 20 stainless steel corner ties for secure joining at corners and straight runs. Everything needed for a professional, warranty-safe installation is included in one pack.
30 m
Mesh roll length
200 mm
Roll width
200
Black fixing clips
20
SS corner ties
No drilling
Warranty-safe fit
ℹ Kit Contents at a Glance — 1× 30 m PVC-coated galvanised welded mesh roll (200 mm wide) · 200× SolarGuard 30 mm black fixing clips · 20× stainless steel ball-lock corner ties (7.9 mm × 200 mm)
Product Details
| Brand | Enviroguard |
| Part Number | EG-BIRD-MESH-BLK-KIT |
| Mesh — Roll Length | 30 m |
| Mesh — Roll Width | 200 mm |
| Mesh — Aperture Size | 25 mm × 12.5 mm (1″ × ½″) |
| Mesh — Wire Gauge | 16 gauge / 1.5 mm diameter |
| Mesh — Construction | Hot-dipped galvanised welded steel wire, PVC coated black |
| Fixing Clips — Qty | 200 × SolarGuard 30 mm black clips (EG-FASTEN-CLIP-B) |
| Fixing Clips — Features | Clip-on to panel frame edge, no drilling, patented non-releasable locking, infinite adjustment |
| Corner Ties — Qty | 20 × stainless steel ball-lock ties |
| Corner Ties — Dimensions | 7.9 mm × 200 mm |
| Corner Ties — Features | Stainless steel, self-locking ball mechanism, fireproof, high chemical resistance, suitable for straight and corner joints |
Frequently Asked Questions
Will this void my solar panel warranty?
No. The SolarGuard fixing clips clip onto the outer edge of the panel frame — no screws, no drilling, and no adhesives are applied to the panel itself. This makes it the warranty-safe method recommended for most residential and commercial rooftop solar installations.
How many panels will this kit cover?
Coverage depends on panel size and array layout. The 200 mm wide mesh is pre-sized to fit directly between the panel frame underside and the roof surface on most standard residential panels without cutting. A typical 6-panel (2×3) array with 1.7 m-tall panels uses roughly 10–12 m of mesh per row. The 30 m roll is well-suited to arrays of 10–14 panels, subject to layout.
How are the clips installed?
Slide each clip onto the lip of the solar panel frame, spacing them approximately every 450 mm around the perimeter. The mesh is then pressed into the clips, which lock it securely in place. The patented non-releasable locking feature means the clips cannot be pulled off by birds or wind once engaged. No special tools are required.
What are the corner ties used for?
The 20 stainless steel ball-lock corner ties are used to join sections of mesh at corners and along straight runs — for example when wrapping around the end of a panel row or joining two lengths of mesh. The self-locking ball mechanism allows the tie to be tightened to any length and will not release under tension. They are fireproof and highly chemical-resistant, suitable for long-term outdoor use.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Enviroguard Solar Panel Bird Deterrent Mesh Kit is a complete solution for excluding pigeons and other birds from nesting under rooftop solar panels — without drilling into the panel frame. The kit includes a 30-metre roll of black PVC-coated galvanised welded mesh, 200 SolarGuard fixing clips that grip the panel frame edge, and 20 stainless steel corner ties for secure joining at corners and straight runs. Everything needed for a professional, warranty-safe installation is included in one pack.
30 m
Mesh roll length
200 mm
Roll width
200
Black fixing clips
20
SS corner ties
No drilling
Warranty-safe fit
ℹ Kit Contents at a Glance — 1× 30 m PVC-coated galvanised welded mesh roll (200 mm wide) · 200× SolarGuard 30 mm black fixing clips · 20× stainless steel ball-lock corner ties (7.9 mm × 200 mm)
Product Details
| Brand | Enviroguard |
| Part Number | EG-BIRD-MESH-BLK-KIT |
| Mesh — Roll Length | 30 m |
| Mesh — Roll Width | 200 mm |
| Mesh — Aperture Size | 25 mm × 12.5 mm (1″ × ½″) |
| Mesh — Wire Gauge | 16 gauge / 1.5 mm diameter |
| Mesh — Construction | Hot-dipped galvanised welded steel wire, PVC coated black |
| Fixing Clips — Qty | 200 × SolarGuard 30 mm black clips (EG-FASTEN-CLIP-B) |
| Fixing Clips — Features | Clip-on to panel frame edge, no drilling, patented non-releasable locking, infinite adjustment |
| Corner Ties — Qty | 20 × stainless steel ball-lock ties |
| Corner Ties — Dimensions | 7.9 mm × 200 mm |
| Corner Ties — Features | Stainless steel, self-locking ball mechanism, fireproof, high chemical resistance, suitable for straight and corner joints |
Frequently Asked Questions
Will this void my solar panel warranty?
No. The SolarGuard fixing clips clip onto the outer edge of the panel frame — no screws, no drilling, and no adhesives are applied to the panel itself. This makes it the warranty-safe method recommended for most residential and commercial rooftop solar installations.
How many panels will this kit cover?
Coverage depends on panel size and array layout. The 200 mm wide mesh is pre-sized to fit directly between the panel frame underside and the roof surface on most standard residential panels without cutting. A typical 6-panel (2×3) array with 1.7 m-tall panels uses roughly 10–12 m of mesh per row. The 30 m roll is well-suited to arrays of 10–14 panels, subject to layout.
How are the clips installed?
Slide each clip onto the lip of the solar panel frame, spacing them approximately every 450 mm around the perimeter. The mesh is then pressed into the clips, which lock it securely in place. The patented non-releasable locking feature means the clips cannot be pulled off by birds or wind once engaged. No special tools are required.
What are the corner ties used for?
The 20 stainless steel ball-lock corner ties are used to join sections of mesh at corners and along straight runs — for example when wrapping around the end of a panel row or joining two lengths of mesh. The self-locking ball mechanism allows the tie to be tightened to any length and will not release under tension. They are fireproof and highly chemical-resistant, suitable for long-term outdoor use.
